JEE Physics: Newton’s Laws of Motions

Newton’s Laws of Motion for JEE

How this textbook is organised

Read the chapters in order. Every heading opens with the basic idea in plain words, every result is derived step by step with a figure, and every solved example has a detailed solution. Each chapter ends with a graded exercise; every question carries a level tag (L1 to L5) and a full solution. The question bank by level lists every question so you can practise one level at a time.

PartChaptersWhat you gain
Force1 Force and its representationKinds of force, vector addition and resolution, free-body diagrams
The three laws2 First law and inertia · 3 Second law, momentum and impulse · 4 Third lawInertial frames, equilibrium, \(\vec F=d\vec p/dt\), impulse, action–reaction pairs, momentum conservation
The common forces5 Weight, normal force and apparent weight · 6 Strings, tension and pulleys · 7 Spring forcesLifts and weighing machines, tension in light and heavy strings, Hooke’s law, springs in series and parallel
Systems of bodies8 Connected bodies · 9 Constraint relations · 10 Inclined planes and wedgesAtwood machines, blocks in contact, pulley and wedge constraints, movable wedges
Accelerating observers11 Non-inertial frames and pseudo forcesPendulum in a car, block at rest on an accelerating wedge, effective gravity
Mastery12 Techniques and common mistakes · 13 Extended practiceMethod choice, 20 traps, further graded questions
Reference and testsFormula derivations · Comparison tables · Question bank · Revision guide and testsFormula sheet, summary, mixed test, Level 5 challenge test with marking schemes

Every question is original; none is labelled as a previous-year JEE question. Take \(g=10\ \text{m/s}^2\) unless stated otherwise. Strings are light and inextensible, pulleys light and frictionless, and surfaces smooth unless a problem says otherwise. Friction is treated in the next unit; where it appears here it is only as a given force.

Objectives and prerequisites

After this unit you should be able to

  1. Classify forces, add and resolve them as vectors, and draw a correct free-body diagram for any body.
  2. State and apply the first law; identify inertial frames; solve equilibrium problems, including Lami’s theorem.
  3. Use \(\vec F=d\vec p/dt\) and \(\vec F=m\vec a\) in component form; use impulse, the impulse–momentum theorem and the variable-mass force \(v\,dm/dt\).
  4. Identify action–reaction pairs correctly and derive conservation of momentum from the third law.
  5. Find normal forces and apparent weight in lifts; analyse light and heavy strings, pulleys and springs.
  6. Solve connected-body problems: blocks in contact, Atwood machines, blocks on tables and inclines.
  7. Write constraint relations for strings, pulleys and wedges.
  8. Analyse smooth inclines and movable wedges.
  9. Use pseudo forces in accelerating frames.

What you need before starting

TopicWhat exactlyUsed first in
Rectilinear kinematicsConstant-acceleration equations; \(a=v\,dv/dx\)Ch 3
VectorsAddition, components, unit vectors, dot productCh 1
Trigonometry\(\sin\), \(\cos\), \(\tan\) of standard angles; sine ruleCh 1–2
CalculusDerivatives and simple integralsCh 3, Ch 6
Relative motion\(\vec a’=\vec a-\vec A\) between framesCh 2, Ch 11

Diagnostic test

Ten questions, 20 minutes. 8–10: start at Chapter 1 and move quickly. 5–7: revise the named topic first. Below 5: revise kinematics and vectors.

D1Vectors

Find the magnitude of \(3\hat i+4\hat j\).

Answer
5.
D2Components

A vector of length 10 makes 30° with the x-axis. Find its x-component.

Answer
\(10\cos30^\circ=8.66\).
D3Kinematics

From rest at 2 m/s², what speed after 5 s?

Answer
10 m/s.
D4Kinematics

A car at 20 m/s stops in 40 m with uniform retardation. Find the retardation.

Answer
5 m/s² (\(v^2=u^2-2as\)).
D5Trigonometry

Evaluate \(\sin37^\circ\) and \(\cos37^\circ\) (3-4-5 approximation).

Answer
0.6 and 0.8.
D6Dot product

Find \((2\hat i+\hat j)\cdot(\hat i-2\hat j)\).

Answer
0: the vectors are perpendicular.
D7Calculus

Differentiate \(p=4t^2\) with respect to t.

Answer
\(8t\).
D8Area under a graph

A quantity rises linearly from 0 to 10 over 4 s. Find the area under its graph.

Answer
20 (triangle).
D9Relative acceleration

A ball falls at g in the ground frame. What is its acceleration seen from a lift accelerating down at g?

Answer
Zero: it floats relative to the lift.
D10Units

Write the SI base units of kg·m/s².

Answer
It is the newton, N.

Chapter 1 · Force and its representation

1.1 What a force is

The basic idea

Kinematics described motion without asking why it happens. Dynamics asks the why. Experience says that the velocity of a body changes only when something else acts on it: a hand pushes a trolley, the Earth pulls a falling stone, a stretched rubber band pulls a pebble. That “something acting” is a force. A force is always exerted by one body on another body; there is no force without two bodies.

Force is measured by what it does. Hang different loads on a spring and the stretch tells you how strong the pull is; push a cart and its change of velocity tells you the same thing. Newton’s laws make this precise: force is whatever changes momentum, at a rate equal to the force (Chapter 3).

Definition

A force is an interaction between two bodies that can change the state of rest or of uniform motion of either body, or deform it. It is a vector: it has magnitude, direction and a point of application. The SI unit is the newton: \(1\ \text{N}=1\ \text{kg·m/s}^2\), the force that gives 1 kg an acceleration of 1 m/s².

1.2 Contact forces and field forces

The basic idea

Some forces need the bodies to touch: a push, the support of a table, the pull of a rope, friction. These are contact forces. Others act across empty space: gravity, the electric force between charges, magnetism. These are field forces (Figure 1.1). At the microscopic level every contact force is electromagnetic, the repulsion between the outer electrons of atoms pressed close together; in mechanics we simply treat it as a force acting where the surfaces meet.

blockpush PNcontact forces: touch neededW = mgfield force: acts at a distance

Figure 1.1 · §1.2. A push and a normal force act only where bodies touch. Gravity acts on the ball in mid-air with nothing touching it.

Fundamental forceRelative strengthRangeWhere you meet it in mechanics
Gravitational\(10^{-39}\)InfiniteWeight \(mg\)
Weak nuclear\(10^{-13}\)\(\sim10^{-18}\) mNot in mechanics (β decay)
Electromagnetic\(10^{-2}\)InfiniteNormal force, tension, friction, spring force (all contact forces)
Strong nuclear1\(\sim10^{-15}\) mNot in mechanics (holds nuclei together)
Table 1.1 · The four fundamental interactions. Gravity is by far the weakest, yet it dominates large-scale motion because it is always attractive and masses do not cancel.

1.3 Force is a vector: adding forces

The basic idea

Two people pulling a box with ropes at an angle do not produce a pull equal to the sum of their efforts; the box moves along a direction between the ropes, and the combined pull is less than the sum. Forces add like arrows, not like numbers. The single force that has the same effect as several forces together is their resultant or net force.

Derivation 1.1 · Resultant of two forces (parallelogram law)
  1. Draw \(\vec F_1\) and \(\vec F_2\) from a common point O, with angle θ between them, and complete the parallelogram; its diagonal from O is \(\vec R=\vec F_1+\vec F_2\) (Figure 1.2).
  2. Drop a perpendicular from the tip of \(\vec R\) onto the line of \(\vec F_1\). The right triangle has horizontal leg \(F_1+F_2\cos\theta\) and vertical leg \(F_2\sin\theta\).
  3. Pythagoras: \(R^2=(F_1+F_2\cos\theta)^2+(F_2\sin\theta)^2=F_1^2+2F_1F_2\cos\theta+F_2^2(\cos^2\theta+\sin^2\theta)\).
  4. So \(R^2=F_1^2+F_2^2+2F_1F_2\cos\theta\).
  5. Direction from \(\vec F_1\): \(\tan\alpha=\dfrac{F_2\sin\theta}{F_1+F_2\cos\theta}\).
  6. Limits: θ = 0 gives \(R=F_1+F_2\) (largest); θ = 180° gives \(R=|F_1-F_2|\) (smallest); θ = 90° gives \(R=\sqrt{F_1^2+F_2^2}\).
  7. Figure 1.2: \(F_1=4\), \(F_2=3\) N, θ = 60°: \(R^2=16+9+12=37\), \(R=6.08\) N, \(\tan\alpha=2.598/5.5\Rightarrow\alpha=25.3^\circ\).
\[ R=\sqrt{F_1^2+F_2^2+2F_1F_2\cos\theta},\qquad \tan\alpha=\frac{F_2\sin\theta}{F_1+F_2\cos\theta},\qquad |F_1-F_2|\le R\le F_1+F_2 . \]
F₁ = 4 NF₂ = 3 NRθαF₂ cos θF₂ sin θO

Figure 1.2 · Derivation 1.1 with F₁ = 4 N, F₂ = 3 N, θ = 60°. Dropping a perpendicular from the tip of R gives a right triangle with legs F₁ + F₂cos θ and F₂sin θ, so R = √37 ≈ 6.08 N at α ≈ 25.3° to F₁.

1.4 Resolving a force into components

The basic idea

Adding many forces with the parallelogram rule is slow. It is easier to replace each force by two perpendicular pieces, one along x and one along y, add all the x-pieces as ordinary signed numbers, add all the y-pieces, and only then combine. Resolving is the reverse of adding: it splits one force into two that together have the same effect.

Derivation 1.2 · Components of a force
  1. Let \(\vec F\) make angle θ with the +x axis. Drop a perpendicular from its tip to the x-axis (Figure 1.3).
  2. In the right triangle, the adjacent side is \(F\cos\theta\) and the opposite side is \(F\sin\theta\).
  3. So \(\vec F=F\cos\theta\,\hat i+F\sin\theta\,\hat j\): \(F_x=F\cos\theta\), \(F_y=F\sin\theta\).
  4. Back again: \(F=\sqrt{F_x^2+F_y^2}\), \(\tan\theta=F_y/F_x\) (choose the quadrant from the signs).
  5. For several forces: \(R_x=\sum F_{x}\), \(R_y=\sum F_{y}\), because vector addition adds components separately.
\[ F_x=F\cos\theta,\quad F_y=F\sin\theta;\qquad R_x=\sum_i F_{ix},\quad R_y=\sum_i F_{iy},\quad R=\sqrt{R_x^2+R_y^2}. \]
xyF = 10 NF cos θ = 8.66 NF sin θ = 5 Nθ = 30°

Figure 1.3 · Derivation 1.2. A force F at angle θ to the x-axis is equivalent to Fcos θ along x plus Fsin θ along y (drawn for 10 N at 30°; lengths in units of 2 N).

The axes are yours to choose. On an incline, axes along and perpendicular to the slope usually make the algebra shorter (Chapter 10).

1.5 Free-body diagrams

The basic idea

Newton’s laws apply to one body at a time. A free-body diagram (FBD) shows that body alone, cut free from everything around it, with an arrow for every force that the surroundings exert on it. Most errors in dynamics are errors in the FBD: a force left out, a force added that acts on a different body, or an arrow in the wrong direction.

Procedure
  1. Choose the body (or system). Draw it alone, as a box or a dot.
  2. Draw its weight \(mg\) downward.
  3. Go round its boundary. At every point where it touches something, draw the contact force: normal force (perpendicular to the surface), tension (along each string, away from the body), friction (along the surface), spring force.
  4. Add any other field force (electric, magnetic) if present.
  5. Do not draw forces the body exerts on others, and do not draw “the force of motion” or \(ma\) as a force.
  6. Choose axes, ideally one along the acceleration.
Derivation 1.3 · Net force from a free-body diagram
  1. A 2 kg block on a smooth floor is pulled by a string at 37° above the horizontal with tension 10 N (Figure 1.4). Forces on it: weight 20 N down, normal force N up, tension 10 N along the string.
  2. Resolve the tension: horizontal \(10\cos37^\circ=8\) N, vertical \(10\sin37^\circ=6\) N.
  3. The block stays on the floor, so the vertical forces balance: \(N+6-20=0\Rightarrow N=14\) N. The floor pushes less than the full weight because the string lifts partly.
  4. Net force: \(R_x=8\) N, \(R_y=0\). The block accelerates horizontally (Chapter 3: \(a=8/2=4\) m/s²).
\[ N=mg-T\sin\theta,\qquad F_{\text{net}}=T\cos\theta\quad(\text{string pulling upward at }\theta). \]
2 kgN = 14 NW = 20 NT = 10 N37°6 N8 Nisolate the body; draw every force on it

Figure 1.4 · Derivation 1.3. Free-body diagram of a 2 kg block on a smooth floor pulled by a 10 N string at 37°. Vertical balance gives N = 20 − 6 = 14 N; the net force is the 8 N horizontal component.

Solved examples 1.1–1.4

Example 1.1

L1 Foundation
Problem
Forces of 3 N and 4 N act on a particle at right angles to each other. Find the magnitude and direction of the resultant.
Concepts tested
Parallelogram law, perpendicular case
Given
\(F_1=4\) N, \(F_2=3\) N, θ = 90°
To find
R and its angle with the 4 N force
Diagram or graph
Figure 1.2 with θ = 90°
Sign convention
Angle measured from the 4 N force toward the 3 N force
Method
Use \(R=\sqrt{F_1^2+F_2^2}\) and \(\tan\alpha=F_2/F_1\).
Detailed solution
  1. With θ = 90°, \(\cos\theta=0\): \(R^2=4^2+3^2=16+9=25\).
  2. \(R=5\) N.
  3. \(\tan\alpha=\dfrac{3\sin90^\circ}{4+3\cos90^\circ}=\dfrac34\Rightarrow\alpha=36.9^\circ\).
Justification
Derivation 1.1
Calculation
\(R=5\) N; \(\alpha=\tan^{-1}(0.75)=36.9^\circ\)
Answer
5 N at 36.9° to the 4 N force (53.1° to the 3 N force)
Interpretation
The resultant is smaller than 3 + 4 = 7 N because the forces partly work in different directions.
Alternative method
Components: (4, 3) N, magnitude 5 N.
Common trap
Adding magnitudes to get 7 N.
Recognise it
Two perpendicular forces.

Example 1.2

L2 Basic application
Problem
Two forces, each of 10 N, act at a point with an angle of 120° between them. Find the resultant.
Concepts tested
Equal forces; resultant bisects the angle
Given
\(F_1=F_2=10\) N, θ = 120°
To find
R and its direction
Sign convention
—
Method
Apply the parallelogram formula; for equal forces the resultant bisects the angle.
Detailed solution
  1. \(R^2=100+100+2(10)(10)\cos120^\circ=200-100=100\Rightarrow R=10\) N.
  2. \(\tan\alpha=\dfrac{10\sin120^\circ}{10+10\cos120^\circ}=\dfrac{8.66}{5}=1.732\Rightarrow\alpha=60^\circ\), half of 120°.
  3. General equal forces: \(R=2F\cos(\theta/2)=2(10)\cos60^\circ=10\) N ✓.
Justification
Derivation 1.1 with \(F_1=F_2\)
Calculation
R = 10 N, bisecting the 120° angle
Answer
10 N, along the bisector of the angle between the forces
Interpretation
Two 10 N forces at 120° are balanced by a third 10 N force: three equal forces at 120° to each other are in equilibrium.
Alternative method
\(R=2F\cos(\theta/2)\).
Common trap
Taking \(\cos120^\circ=+0.5\).
Recognise it
Equal forces at a given angle.

Example 1.3

L2 Basic application
Problem
Forces act on a particle as follows: 10 N east, 6 N north, 2 N west. Find the resultant.
Concepts tested
Adding components
Given
Three forces along the axes
To find
R and its direction
Sign convention
East +x, north +y
Method
Add x-components and y-components separately, then combine.
Detailed solution
  1. \(R_x=10-2=8\) N.
  2. \(R_y=6\) N.
  3. \(R=\sqrt{8^2+6^2}=\sqrt{100}=10\) N.
  4. \(\tan\alpha=6/8\Rightarrow\alpha=36.9^\circ\) north of east.
Justification
Derivation 1.2
Calculation
\(R_x=8\), \(R_y=6\); R = 10 N
Answer
10 N at 36.9° north of east
Interpretation
The east and west forces cancel partly before combining with the north force.
Alternative method
Parallelogram on 8 N east and 6 N north.
Common trap
Treating all three magnitudes as perpendicular.
Recognise it
Forces given by compass directions.

Example 1.4

L3 JEE Main
Problem
Two forces have magnitudes 5 N and 12 N. (a) What are the largest and smallest possible resultants? (b) At what angle between them is the resultant 13 N? (c) Can the resultant be 6 N?
Concepts tested
Range of the resultant; inverse use of the parallelogram formula
Given
\(F_1=12\), \(F_2=5\) N
To find
\(R_{\max}\), \(R_{\min}\), θ for R = 13 N, feasibility of 6 N
Sign convention
—
Method
Use \(|F_1-F_2|\le R\le F_1+F_2\); solve the parallelogram formula for cos θ.
Detailed solution
  1. \(R_{\max}=12+5=17\) N (θ = 0); \(R_{\min}=12-5=7\) N (θ = 180°).
  2. \(169=144+25+2(12)(5)\cos\theta\Rightarrow120\cos\theta=0\Rightarrow\theta=90^\circ\).
  3. 6 N is below the minimum 7 N, so no angle gives it.
Justification
Derivation 1.1, limits
Calculation
17 N; 7 N; θ = 90°; 6 N impossible
Answer
(a) 17 N and 7 N; (b) 90°; (c) no
Interpretation
5, 12, 13 is a Pythagorean triple, which is why the angle is exactly 90°.
Alternative method
Triangle of forces: sides 5, 12 and R must satisfy the triangle inequality.
Common trap
Thinking any value between 0 and 17 N is possible.
Recognise it
“Maximum and minimum resultant”.

Exercise 1

Q1.1L1Numerical · resultant · 1 min

Two forces of 6 N and 8 N act at right angles. Find the magnitude of the resultant.

Solution
\(\sqrt{36+64}=\) 10 N.
Q1.2L1Single correct · contact force · 1 min

Which of these is a field force?

(A) Tension(B) Normal force(C) Gravitational force(D) Friction
Solution
(C). The others need contact.
Q1.3L1Numerical · components · 1 min

A 20 N force acts at 60° to the x-axis. Find its x- and y-components.

Solution
\(F_x=20\cos60^\circ=\) 10 N; \(F_y=20\sin60^\circ=\) 17.3 N.
Q1.4L2Numerical · equal forces · 2 min

Two equal forces F act at 60° to each other. Find the resultant in terms of F.

Solution
\(R=2F\cos30^\circ=\) \(\sqrt3F\approx1.73F\).
Q1.5L2Numerical · net force · 2 min

Forces \((3\hat i-2\hat j)\) N, \((-1\hat i+5\hat j)\) N and \((4\hat i+\hat j)\) N act on a body. Find the magnitude of the net force.

Solution
\(R=(6,4)\) N; \(|R|=\sqrt{52}\approx\) 7.21 N.
Q1.6L3Numerical · angle from resultant · 2 min

Two forces of 3 N and 5 N have a resultant of 7 N. Find the angle between them.

Solution
\(49=9+25+30\cos\theta\Rightarrow\cos\theta=0.5\Rightarrow\) θ = 60°.
Q1.7L3Numerical · normal force with a pull · 2 min

A 5 kg block on a smooth floor is pulled by a string at 30° above the horizontal with tension 40 N. Find the normal force and the net force.

Solution
\(N=50-40\sin30^\circ=\) 30 N; net force \(40\cos30^\circ=\) 34.6 N horizontally.
Q1.8L4Numerical · resultant perpendicular to one force · 3 min

The resultant of two forces P and Q is perpendicular to P, and its magnitude equals P. Find Q and the angle between P and Q.

Solution
Components along P: \(P+Q\cos\theta=0\); across: \(Q\sin\theta=P\). So \(Q\cos\theta=-P\), \(Q\sin\theta=P\Rightarrow Q=\sqrt2P\), \(Q=\sqrt2P\) at θ = 135°.

Chapter 2 · Newton’s first law and inertia

2.1 From Aristotle to Galileo

The basic idea

Everyday experience suggests that moving things stop by themselves: a ball rolled on grass slows and halts, a cart stops when you stop pushing. Aristotle concluded that a force is needed to keep a body moving. Galileo saw that the slowing is itself caused by a force, friction, and asked what would happen with no friction at all. His answer, reached by a thought experiment on smooth inclines (Derivation 2.1), is the opposite of Aristotle’s: no force is needed to keep a body moving; force is needed to change its motion.

Derivation 2.1 · Galileo’s double-incline argument
  1. Release a ball from rest on a smooth incline. Experiment shows it rolls down and up a second incline to (very nearly) its starting height, the shortfall shrinking as the surfaces are made smoother.
  2. Make the second incline gentler. The ball still rises to the same height, so it must travel farther along the slope to get there (Figure 2.1).
  3. Make the second incline gentler still: the distance needed to regain the height keeps growing.
  4. In the limit of a horizontal second plane the ball can never regain its height, so it never has a reason to stop: it keeps moving with the speed it had at the bottom.
  5. Conclusion: in the absence of friction (or any other force along the motion), a moving body continues to move with constant velocity.
\[ \text{no net force}\ \Longrightarrow\ \text{velocity unchanged} \]
releasesame heightflat: never stopssteepgentle

Figure 2.1 · Derivation 2.1. On smooth inclines a ball rises to its starting height whatever the slope, travelling farther on gentler slopes. On a horizontal plane it can never regain the height, so it never stops: motion persists without force.

2.2 Newton’s first law

The basic idea

Newton turned Galileo’s insight into the first of his three laws. It says what happens when the net force is zero, and in doing so it defines what we mean by a force: a force is what you must look for whenever the velocity of a body changes.

First law

Every body continues in its state of rest or of uniform motion in a straight line unless it is compelled by a net external force to change that state.

\[ \vec F_{\text{net}}=\vec 0\iff\vec v=\text{constant}\ (\vec a=\vec 0). \]

Two points are often missed. The law speaks of the net force: a car cruising at constant velocity has several forces on it (engine drive, air drag, road friction, weight, normal force) that add to zero. And “rest” is only the special case \(\vec v=\vec 0\) of uniform motion; physics does not distinguish them.

2.3 Inertia and mass

The basic idea

Inertia is the tendency of a body to keep its velocity. It is not a force; it is a property of the body. A loaded truck is harder to start and harder to stop than a bicycle because it has more inertia. The quantitative measure of inertia is mass: the larger the mass, the smaller the change of velocity a given force produces in a given time (made exact by the second law, \(a=F/m\)).

Kind of inertiaWhat persistsEveryday example
Inertia of restRestPassengers fall backward when a bus starts suddenly; a coin on a card drops into the glass when the card is flicked away
Inertia of motionSpeedPassengers lurch forward when a bus brakes; an athlete runs on past the finish line
Inertia of directionDirectionMud flies off a spinning wheel along the tangent; passengers are thrown outward on a sharp turn
Table 2.1 · All three are the same property: the body keeps its velocity vector unless a net force changes it.

2.4 Inertial frames of reference

The basic idea

The first law cannot be true in every frame. Sit in a bus that brakes: a ball on the smooth floor rolls forward although nothing pushes it. The law holds only for observers who are not themselves accelerating. Such frames are called inertial; the first law is really the statement that inertial frames exist. Once one is known, every frame moving at constant velocity relative to it is inertial too (Derivation 2.2).

Derivation 2.2 · Frames in uniform motion are inertial; accelerating frames are not
  1. Let S be inertial and S′ move relative to S with velocity \(\vec V(t)\) and acceleration \(\vec A=d\vec V/dt\).
  2. Galilean transformation: \(\vec v\,’=\vec v-\vec V\), so \(\vec a\,’=\vec a-\vec A\).
  3. Take a body with no net force. In S, by the first law, \(\vec a=\vec 0\). Then \(\vec a\,’=-\vec A\).
  4. If \(\vec A=\vec 0\) (S′ moves uniformly), \(\vec a\,’=\vec 0\): the first law holds in S′, which is inertial.
  5. If \(\vec A\ne\vec 0\), the force-free body accelerates at \(-\vec A\) in S′ (Figure 2.2, right): the first law fails, S′ is non-inertial.
  6. The ground is very nearly inertial: Earth’s rotation and orbit give accelerations below 0.04 m/s², under 0.4% of g.
\[ \vec a\,’=\vec a-\vec A:\qquad \text{S}’\ \text{inertial}\iff\vec A=\vec 0 . \]
V constantball stays putA forwardball ‘starts’ backward

Figure 2.2 · Derivation 2.2. In a train moving at constant velocity (left) a ball at rest on a smooth floor stays at rest: the first law holds, the frame is inertial. In an accelerating train (right) the ball appears to accelerate backward with no force on it: the first law fails.

Chapter 11 shows how Newton’s laws can still be used in an accelerating frame by adding a pseudo force \(-m\vec A\).

2.5 Equilibrium of a particle

The basic idea

A body is in translational equilibrium when its acceleration is zero: it is at rest or moving uniformly. By the first law that happens exactly when the forces on it add to zero. Equilibrium problems are solved by writing that condition component by component; each independent component gives one equation, so in a plane you can find two unknowns.

Derivation 2.3 · Conditions of equilibrium, applied to a hanging lamp
  1. Equilibrium: \(\sum\vec F=\vec 0\). In components: \(\sum F_x=0\) and \(\sum F_y=0\).
  2. Lamp of weight W = 100 N hung from a knot; strings at 30° and 60° to the horizontal with tensions \(T_1\), \(T_2\) (Figure 2.3). The knot is the body; three forces act on it.
  3. x: \(T_2\cos60^\circ-T_1\cos30^\circ=0\Rightarrow T_2=\sqrt3\,T_1\).
  4. y: \(T_1\sin30^\circ+T_2\sin60^\circ-W=0\Rightarrow\tfrac12T_1+\tfrac32T_1=100\).
  5. So \(2T_1=100\): \(T_1=50\) N, \(T_2=86.6\) N.
  6. Check: the steeper string carries more of the load, as expected; and \(T_1+T_2=136.6\) N exceeds W, because the horizontal parts of the tensions cancel each other and do no lifting.
\[ \sum F_x=0,\qquad \sum F_y=0 \]
T₁ = 50 NT₂ = 86.6 N10 kgW = 100 N30°60°knot

Figure 2.3 · Derivation 2.3 (and Example 2.2). A 10 kg lamp hangs from a knot held by strings at 30° and 60° to the horizontal. The forces on the knot balance in x and in y: T₁ = 50 N, T₂ = 86.6 N (arrows to scale).

2.6 Three forces: the triangle of forces and Lami’s theorem

The basic idea

If three forces balance, then placed head to tail they must return to the starting point: they form a closed triangle (Figure 2.4). Its sides are proportional to the forces, so ordinary triangle geometry — in particular the sine rule — solves the problem without resolving anything. Three balancing forces must also lie in one plane and, if they are not parallel, pass through one point.

Derivation 2.4 · Lami’s theorem
  1. Three forces \(\vec P,\vec Q,\vec R\) act at a point in equilibrium. Let α be the angle between Q and R, β between R and P, γ between P and Q.
  2. Since \(\vec P+\vec Q+\vec R=\vec 0\), drawn head to tail they form a closed triangle with sides P, Q, R.
  3. The interior angle of the triangle opposite side P is the supplement of α: it is \(180^\circ-\alpha\) (turning from Q to R in the triangle reverses one of them). Similarly \(180^\circ-\beta\) opposite Q and \(180^\circ-\gamma\) opposite R.
  4. Sine rule: \(\dfrac{P}{\sin(180^\circ-\alpha)}=\dfrac{Q}{\sin(180^\circ-\beta)}=\dfrac{R}{\sin(180^\circ-\gamma)}\), and \(\sin(180^\circ-x)=\sin x\).
  5. Lamp of Figure 2.3: angle between \(T_2\) and W is 150°, between W and \(T_1\) is 120°, between \(T_1\) and \(T_2\) is 90°. So \(\dfrac{T_1}{\sin150^\circ}=\dfrac{T_2}{\sin120^\circ}=\dfrac{100}{\sin90^\circ}\Rightarrow T_1=50\) N, \(T_2=86.6\) N ✓.
\[ \frac{P}{\sin\alpha}=\frac{Q}{\sin\beta}=\frac{R}{\sin\gamma}\qquad(\alpha\text{ is the angle between the other two forces}). \]
W = 100 NT₁ = 50 NT₂ = 86.6 Nclosed triangle: ΣF = 0angles opposite the sides:W ↔ 90°, T₁ ↔ 30°, T₂ ↔ 60°

Figure 2.4 · Derivation 2.4. The three forces on the knot of Figure 2.3, placed head to tail, close into a triangle. The sine rule in this triangle, rewritten with the angles between the forces, is Lami’s theorem.

Solved examples 2.1–2.5

Example 2.1

L1 Foundation
Problem
A 2 kg puck slides at a steady 3 m/s across smooth horizontal ice. (a) What net horizontal force acts on it? (b) What vertical force does the ice exert?
Concepts tested
First law; equilibrium in two directions
Given
m = 2 kg, v = 3 m/s constant, smooth ice
To find
Net horizontal force; normal force
Sign convention
Up positive
Method
Constant velocity means zero acceleration, so zero net force in every direction.
Detailed solution
  1. Velocity is constant, so \(\vec a=0\) and \(\vec F_{\text{net}}=0\) (first law).
  2. Horizontal: smooth ice exerts no friction and nothing else pushes, so the net horizontal force is 0. No force is needed to keep it moving.
  3. Vertical: \(N-mg=0\Rightarrow N=2\times10=20\) N upward.
Justification
First law, §2.2
Calculation
\(F_x=0\); \(N=20\) N
Answer
(a) Zero; (b) 20 N upward
Interpretation
The 3 m/s persists by inertia, not because a force maintains it.
Alternative method
—
Common trap
Inventing a “force of motion” of \(m\times v\).
Recognise it
“Steady”, “constant velocity”, “smooth”.

Example 2.2

L2 Basic application
Problem
A 10 kg lamp hangs from two strings attached to a ceiling, making 30° and 60° with the horizontal (Figure 2.3). Find the tensions.
Concepts tested
Equilibrium by components
Given
W = 100 N; angles 30° and 60° with the horizontal
To find
\(T_1\) (30° string), \(T_2\) (60° string)
Diagram or graph
Figure 2.3
Sign convention
x right, y up
Method
Body = knot. Resolve both tensions; set \(\sum F_x=0\), \(\sum F_y=0\).
Detailed solution
  1. x: \(T_2\cos60^\circ=T_1\cos30^\circ\Rightarrow0.5T_2=0.866T_1\Rightarrow T_2=1.732T_1\).
  2. y: \(T_1\sin30^\circ+T_2\sin60^\circ=100\Rightarrow0.5T_1+1.732(0.866)T_1=100\).
  3. \(0.5T_1+1.5T_1=2T_1=100\Rightarrow T_1=50\) N.
  4. \(T_2=1.732\times50=86.6\) N.
Justification
Derivation 2.3
Calculation
\(T_1=50\) N, \(T_2=86.6\) N
Answer
50 N in the 30° string, 86.6 N in the 60° string
Interpretation
The steeper string takes more load.
Alternative method
Lami’s theorem (Derivation 2.4).
Common trap
Taking the knot’s tensions as W/2 each.
Recognise it
A weight hung from a knot of two or three strings.

Example 2.3

L3 JEE Main
Problem
A 20 kg mass hangs from a knot held by two strings making 37° and 53° with the vertical. Find the tensions using Lami’s theorem, and check by components.
Concepts tested
Lami’s theorem
Given
W = 200 N; strings at 37° and 53° to the vertical
To find
\(T_1\) (37°), \(T_2\) (53°)
Sign convention
—
Method
Find the angle between each pair of forces, then apply Lami.
Detailed solution
  1. Angle between \(T_1\) and \(T_2\): 37° + 53° = 90°.
  2. Angle between \(T_1\) and W (straight down): 180° − 37° = 143°; between \(T_2\) and W: 180° − 53° = 127°.
  3. Lami: \(\dfrac{T_1}{\sin127^\circ}=\dfrac{T_2}{\sin143^\circ}=\dfrac{200}{\sin90^\circ}\).
  4. \(T_1=200\times0.8=160\) N; \(T_2=200\times0.6=120\) N.
  5. Check x: \(160\sin37^\circ=96=120\sin53^\circ\) ✓. y: \(160\cos37^\circ+120\cos53^\circ=128+72=200\) ✓.
Justification
Derivation 2.4
Calculation
\(T_1=160\) N, \(T_2=120\) N
Answer
160 N (37° string), 120 N (53° string)
Interpretation
With the strings at 90° to each other, the tensions are just W cos of each string’s angle with the vertical.
Alternative method
Components alone, as in the check.
Common trap
Using the angle with the vertical in Lami instead of the angle between the other two forces.
Recognise it
Exactly three forces at a point.

Example 2.4

L3 JEE Main
Problem
Which of these frames are inertial (to a good approximation)? (a) A train moving at a steady 30 m/s on a straight track. (b) A lift starting upward. (c) A car taking a curve at constant speed. (d) A spacecraft drifting far from all stars with its engines off.
Concepts tested
Inertial frames
Given
Four frames
To find
Which are inertial
Sign convention
—
Method
A frame is inertial if its acceleration relative to an inertial frame is zero.
Detailed solution
  1. (a) Constant velocity: \(\vec A=0\): inertial.
  2. (b) Speeding up: \(\vec A\ne0\) (upward): non-inertial.
  3. (c) Constant speed but changing direction: centripetal \(\vec A=v^2/r\ne0\): non-inertial.
  4. (d) No force and no rotation: it moves uniformly relative to the stars: inertial.
Justification
Derivation 2.2
Calculation
—
Answer
(a) and (d) are inertial; (b) and (c) are not
Interpretation
Constant speed is not enough; the velocity vector must be constant.
Alternative method
Test: does a force-free ball released in the frame stay at rest there?
Common trap
Calling the car on the curve inertial because its speed is constant.
Recognise it
“Which frame is inertial?”

Example 2.5

L4 Advanced
Problem
A light wire 2 m long is stretched horizontally between two hooks at the same level. A 1 kg mass hung at its midpoint makes the midpoint sag by 5 cm. Find the tension in the wire. What happens to the tension if the sag is made smaller?
Concepts tested
Equilibrium with small angles; why a taut wire can never be perfectly straight under load
Given
Half-length 1 m, sag 0.05 m, W = 10 N
To find
Tension T
Sign convention
Up positive
Method
Each half makes angle θ with the horizontal, \(\sin\theta=\text{sag}/\text{half-length}\) of the stretched wire; vertical balance \(2T\sin\theta=W\).
Detailed solution
  1. Geometry: hooks 2 m apart, so each half spans 1 m horizontally and 0.05 m vertically: \(\tan\theta=0.05\), \(\sin\theta=0.05/\sqrt{1+0.0025}=0.04994\).
  2. Horizontal components cancel by symmetry.
  3. Vertical: \(2T\sin\theta=10\Rightarrow T=\dfrac{10}{2\times0.04994}=100.1\) N.
  4. As the sag \(s\to0\), \(\sin\theta\approx s/1\to0\) and \(T\approx W/(2s)\to\infty\).
Justification
§2.5, vertical equilibrium
Calculation
\(T\approx100\) N, ten times the weight
Answer
About 100 N; it grows without limit as the sag shrinks
Interpretation
No finite tension can hold a load on a perfectly straight horizontal wire: some sag is always needed.
Why this method
Using symmetry removes the horizontal equation and leaves one line of algebra.
Common trap
Assuming the tension equals the weight or half of it.
Recognise it
Load at the middle of a nearly straight string.

Exercise 2

Q2.1L1Single correct · first law · 1 min

A car moves at constant velocity on a straight road. The net force on it is

(A) along the motion(B) opposite to the motion(C) zero(D) equal to its weight
Solution
(C). Constant velocity means zero acceleration.
Q2.2L1Single correct · inertia · 1 min

The measure of the inertia of a body is its

(A) weight(B) mass(C) velocity(D) momentum
Solution
(B).
Q2.3L2Numerical · equilibrium · 2 min

A 6 kg mass hangs from a string. A horizontal force F pulls the mass so that the string makes 37° with the vertical. Find F and the tension.

Solution
\(T\cos37^\circ=60\Rightarrow T=\) 75 N; \(F=T\sin37^\circ=\) 45 N.
Q2.4L2Assertion–reason · inertial frames · 2 min

Assertion: A frame moving with constant velocity relative to an inertial frame is inertial. Reason: Accelerations are the same in both frames.

(A) Both true, R explains A(B) Both true, R does not explain A(C) A true, R false(D) A false, R true
Solution
(A). \(\vec a\,’=\vec a-\vec A\) with \(\vec A=0\).
Q2.5L3Numerical · Lami · 2 min

Three forces act on a particle in equilibrium. The angle between the 20 N and 15 N forces is 90°. Find the third force and the angle it makes with the 20 N force.

Solution
Third force balances the resultant of the two: \(\sqrt{400+225}=\) 25 N, at \(180^\circ-\tan^{-1}(15/20)=180^\circ-36.9^\circ=\) 143.1° to the 20 N force.
Q2.6L3Numerical · symmetric strings · 2 min

A 12 kg picture hangs from a nail by a cord whose two halves make 60° with each other at the nail. Find the tension in the cord.

Solution
Each half is 30° from the vertical: \(2T\cos30^\circ=120\Rightarrow T=\) 69.3 N.
Q2.7L4Multiple correct · equilibrium · 3 min

A particle is in equilibrium under three non-parallel forces. Which statements must be true?

(A) The forces lie in one plane(B) Their lines of action meet at one point(C) Each force equals the sum of the other two in magnitude(D) Each force is less than or equal to the sum of the other two in magnitude
Solution
(A), (B), (D). They form a closed triangle, so the triangle inequality holds; (C) holds only in the degenerate collinear case.
Q2.8L4Numerical · minimum force · 3 min

A 5 kg mass hangs from a string. Find the least force needed to hold the string at 30° to the vertical, and its direction.

Solution
The force must close the triangle with W (fixed) and T (fixed direction). The shortest such side is perpendicular to the string: \(F_{\min}=W\sin30^\circ=\) 25 N, perpendicular to the string (at 30° above the horizontal).

Chapter 3 · Second law, momentum and impulse

3.1 Momentum

The basic idea

Stopping a cricket ball is easy; stopping a truck moving at the same speed is not. Stopping a slow bullet is easy; stopping a fast one is not. What matters is the combination of mass and velocity. Newton called it the “quantity of motion”; we call it linear momentum, \(\vec p=m\vec v\). It is a vector along the velocity, with SI unit kg·m/s (= N·s).

Definition
\[ \vec p=m\vec v,\qquad [\vec p]=\mathrm{MLT^{-1}} . \]

3.2 The second law: \(\vec F=d\vec p/dt\)

The basic idea

The first law says what happens when the net force is zero. The second law says how much the motion changes when it is not: the rate of change of momentum equals the net force, in magnitude and direction. For a body of fixed mass this becomes the familiar \(\vec F=m\vec a\). Double the force, double the acceleration; double the mass, halve it (Figure 3.1).

Second law

The rate of change of momentum of a body equals the net external force on it and takes place in the direction of that force.

\[ \vec F_{\text{net}}=\frac{d\vec p}{dt} \]
Derivation 3.1 · From \(d\vec p/dt\) to \(m\vec a\), and the definition of the newton
  1. \(\vec F=\dfrac{d}{dt}(m\vec v)=m\dfrac{d\vec v}{dt}+\vec v\dfrac{dm}{dt}\) (product rule).
  2. For a body whose mass does not change, \(dm/dt=0\), so \(\vec F=m\dfrac{d\vec v}{dt}=m\vec a\).
  3. The proportionality constant is 1 by choice of unit: 1 N is the net force giving 1 kg an acceleration of 1 m/s². Dimensions: \([F]=\mathrm{MLT^{-2}}\).
  4. Same force, different masses (Figure 3.1): 4 N on 1 kg gives 4 m/s²; on 2 kg, 2 m/s². Both gain momentum at the same rate, 4 kg·m/s each second.
  5. The law is a vector law: \(\vec a\) is parallel to \(\vec F_{\text{net}}\), not necessarily to \(\vec v\).
  6. Consistency with the first law: \(\vec F_{\text{net}}=\vec 0\Rightarrow\vec a=\vec 0\Rightarrow\vec v\) constant.
\[ \vec F_{\text{net}}=\frac{d\vec p}{dt}=m\vec a\quad(m\ \text{constant}),\qquad 1\ \text{N}=1\ \text{kg·m/s}^2 . \]
05101520012345t (s)v (m/s)m = 1 kg: a = 4 m/s²m = 2 kg: a = 2 m/s²Δv = 2 in 1 s

Figure 3.1 · Derivation 3.1. The same 4 N net force acts on 1 kg and on 2 kg. Each gains momentum at 4 kg·m/s per second, so the lighter body’s velocity rises twice as fast: a = F/m.

Other units. 1 dyne = 1 g·cm/s² = \(10^{-5}\) N. The gravitational unit 1 kgf (kilogram-force) is the weight of 1 kg: 9.8 N.

3.3 Using \(\vec F=m\vec a\) in components

The basic idea

A vector equation is really several ordinary equations, one per axis. Resolve every force along chosen axes, add the components, and divide by the mass to get each component of acceleration. The motion along x is governed only by the x-forces; the y-forces do not affect it (beyond fixing normal forces).

Derivation 3.2 · Component form of the second law
  1. \(\vec F_{\text{net}}=m\vec a\) with \(\vec F_{\text{net}}=\sum\vec F_i\). Take components of both sides along fixed axes.
  2. \(\sum F_{ix}=ma_x\), \(\sum F_{iy}=ma_y\) (and \(\sum F_{iz}=ma_z\) in 3D).
  3. If a body is constrained to stay on a surface, its acceleration perpendicular to the surface is zero; that equation then gives the normal force (Derivation 1.3).
  4. Example (Figure 3.2): a 2 kg puck on a smooth table with 8 N east and 6 N north: \(a_x=4\), \(a_y=3\) m/s², \(a=5\) m/s² at 36.9° north of east, along the net force.
\[ a_x=\frac{\sum F_x}{m},\qquad a_y=\frac{\sum F_y}{m},\qquad \vec a\parallel\vec F_{\text{net}} . \]
F₁ = 8 NF₂ = 6 NFnet = 10 N36.9°smooth table, top view; a is along Fnet

Figure 3.2 · Derivation 3.2 (drawn for Example 3.3 with forces in units of 2 N per grid unit). The acceleration is parallel to the net force, a = F_net/m, and each component obeys its own equation aₓ = ΣFₓ/m, a_y = ΣF_y/m.

3.4 Impulse and the impulse–momentum theorem

The basic idea

In a kick, a bat stroke or a collision, a very large force acts for a very short time and its details are unknown. What matters for the outcome is the total effect of the force over the contact: its impulse, force integrated over time. The impulse equals the change of momentum, so a measured change of momentum gives the impulse, and dividing by the contact time gives the average force.

Derivation 3.3 · Impulse equals change of momentum
  1. Second law: \(\vec F=d\vec p/dt\Rightarrow d\vec p=\vec F\,dt\).
  2. Integrate over the contact from \(t_1\) to \(t_2\): \(\vec p_2-\vec p_1=\int_{t_1}^{t_2}\vec F\,dt\equiv\vec J\), the impulse.
  3. On an F–t graph the impulse is the area under the curve (Figure 3.3).
  4. Average force: \(\vec F_{\text{avg}}=\vec J/\Delta t\) — the constant force giving the same impulse in the same time.
  5. Kick of Figure 3.3: \(F=2500\sin(\pi t/0.01)\) N for 10 ms: \(J=2500\cdot\dfrac{0.01}{\pi}\cdot2=15.9\) N·s, \(F_{\text{avg}}=1592\) N.
  6. Why we bend our knees on landing or use airbags: the same Δp spread over a longer Δt needs a smaller average force.
\[ \vec J=\int_{t_1}^{t_2}\vec F\,dt=\Delta\vec p,\qquad F_{\text{avg}}=\frac{|\Delta\vec p|}{\Delta t} . \]
05001000150020002500300000.0020.0040.0060.0080.010.012t (s)F (N)impulse J = areaF_avg = J/Δt

Figure 3.3 · Derivation 3.3. A kick lasting 10 ms with peak force 2500 N. The area under the F–t curve is the impulse, here 2500 × (2/π) × 0.01 = 15.9 N·s; the average force is the height of the rectangle with the same area and duration (1592 N).

3.5 Change of momentum in a rebound

The basic idea

When a ball hits a wall and comes back, its momentum does not drop to zero; it reverses. The change is therefore larger than the momentum itself — up to twice it for a head-on bounce. For an oblique bounce off a smooth wall only the part of the velocity perpendicular to the wall reverses.

Derivation 3.4 · Momentum change for an oblique elastic bounce
  1. Ball of mass m hits a smooth wall at speed v, at angle θ to the normal, and leaves at the same speed and angle (Figure 3.4). Take x along the normal, out of the wall, and y along the wall.
  2. Before: \(\vec p_1=m(-v\cos\theta,\ v\sin\theta)\). After: \(\vec p_2=m(+v\cos\theta,\ v\sin\theta)\).
  3. \(\Delta\vec p=\vec p_2-\vec p_1=(2mv\cos\theta,\ 0)\): along the normal, away from the wall.
  4. The wall’s average force on the ball is \(2mv\cos\theta/\Delta t\), along the normal; by the third law the ball pushes the wall equally in the opposite direction.
  5. Head-on (θ = 0): \(|\Delta\vec p|=2mv\). Grazing (θ → 90°): \(\Delta\vec p\to0\).
\[ |\Delta\vec p|=2mv\cos\theta\ \ (\text{along the normal}),\qquad F_{\text{avg}}=\frac{2mv\cos\theta}{\Delta t} . \]
v (in)v (out)θθnormalΔp alongthe normal:2mv cos θ

Figure 3.4 · Derivation 3.4. On a smooth wall only the component of velocity along the normal reverses; the component along the wall is unchanged. The change of momentum is 2mv cos θ, directed away from the wall.

3.6 Systems that gain or lose mass

The basic idea

Some problems involve a steady stream of matter: sand dropping onto a conveyor belt, water from a hose striking a wall, gas leaving a rocket. Here \(\vec F=m\vec a\) is not enough, because momentum is carried in or out with the mass. Apply \(\vec F=d\vec p/dt\) to the stream itself: the force needed is the rate at which momentum must be supplied or removed.

Derivation 3.5 · Force on a conveyor belt and on a wall struck by a jet
  1. Belt. Sand falls vertically (no horizontal velocity) onto a belt moving at constant v, at a rate μ = dm/dt (Figure 3.5).
  2. In time dt a mass μ dt is brought from horizontal velocity 0 to v: its horizontal momentum increases by \(\mu\,dt\,v\).
  3. Second law for that sand: \(F=\dfrac{dp}{dt}=\mu v\). By the third law the sand drags the belt back with μv, so the motor must push the belt with \(F=\mu v=v\,dm/dt\).
  4. Jet. Water of density ρ leaves a nozzle of area A at speed v and stops on hitting a wall. Mass per second \(\rho Av\), each kilogram losing momentum v: force on the wall \(F=\rho Av\cdot v=\rho Av^2\).
  5. If the jet rebounds with speed v instead of stopping, each kilogram changes momentum by 2v and the force doubles: \(2\rho Av^2\).
\[ F=v\,\frac{dm}{dt}\ (\text{belt}),\qquad F=\rho Av^2\ (\text{jet stopped by a wall}). \]
hopperdm/dt = μ kg/ssandv constantF = μv

Figure 3.5 · Derivation 3.5. Sand drops vertically onto a belt moving at constant speed v. Each second a mass μ must be brought from zero to v horizontally, so the belt must be pushed with F = v dm/dt = μv.

Solved examples 3.1–3.8

Example 3.1

L1 Foundation
Problem
A 1500 kg car accelerates uniformly from rest to 20 m/s in 10 s on a level road. Find the net force on it.
Concepts tested
\(F=ma\)
Given
m = 1500 kg, u = 0, v = 20 m/s, t = 10 s
To find
\(F_{\text{net}}\)
Sign convention
Direction of motion positive
Method
Acceleration from kinematics, then \(F=ma\).
Detailed solution
  1. \(a=(v-u)/t=(20-0)/10=2\) m/s².
  2. \(F=ma=1500\times2=3000\) N.
  3. Check by momentum: \(\Delta p/\Delta t=1500\times20/10=3000\) N ✓.
Justification
Derivation 3.1
Calculation
\(a=2\) m/s²; \(F=3000\) N
Answer
3000 N along the motion
Interpretation
This is the net force: drive force minus all resistances.
Alternative method
\(F=\Delta p/\Delta t\).
Common trap
Using \(F=mv\).
Recognise it
Mass and a change of velocity in a given time.

Example 3.2

L2 Basic application
Problem
The momentum of a 0.5 kg body moving in a straight line varies as \(p=2t^2+3t\) (SI). Find the force on it at t = 2 s and its speed then.
Concepts tested
\(F=dp/dt\)
Given
\(p(t)=2t^2+3t\), m = 0.5 kg
To find
F(2), v(2)
Sign convention
+x as in the formula
Method
Differentiate p; divide p by m for v.
Detailed solution
  1. \(F=\dfrac{dp}{dt}=4t+3\Rightarrow F(2)=11\) N.
  2. \(p(2)=8+6=14\) kg·m/s.
  3. \(v=p/m=14/0.5=28\) m/s.
Justification
Second law, §3.2
Calculation
F = 11 N; v = 28 m/s
Answer
11 N; 28 m/s
Interpretation
The force grows with time, so the acceleration \(F/m=22\) m/s² at 2 s is not constant.
Alternative method
\(v=4t^2+6t\), \(a=8t+6=22\) at 2 s; \(F=ma=11\) N.
Common trap
Dividing p by t to get the force.
Recognise it
Momentum given as a function of time.

Example 3.3

L2 Basic application
Problem
A 2 kg puck on a smooth horizontal table is acted on by 8 N toward the east and 6 N toward the north (Figure 3.2). Find its acceleration.
Concepts tested
Component form
Given
m = 2 kg; \(F_x=8\), \(F_y=6\) N
To find
\(\vec a\)
Diagram or graph
Figure 3.2
Sign convention
East +x, north +y
Method
Divide each component by m, then combine.
Detailed solution
  1. \(a_x=8/2=4\) m/s²; \(a_y=6/2=3\) m/s².
  2. \(a=\sqrt{16+9}=5\) m/s².
  3. \(\tan\phi=3/4\Rightarrow\phi=36.9^\circ\) north of east, the direction of the net force (10 N).
Justification
Derivation 3.2
Calculation
\(a=5\) m/s² at 36.9° N of E
Answer
5 m/s² at 36.9° north of east
Interpretation
Weight and normal force cancel vertically and do not enter.
Alternative method
\(F_{\text{net}}=10\) N, \(a=10/2\).
Common trap
Adding 8 + 6 = 14 N.
Recognise it
Several horizontal forces on a body on a smooth surface.

Example 3.4

L3 JEE Main
Problem
A footballer kicks a stationary 0.45 kg ball. The force on the ball is \(F=2500\sin(\pi t/0.01)\) N for 0 ≤ t ≤ 0.01 s (Figure 3.3). Find the impulse, the speed of the ball and the average force.
Concepts tested
Impulse as area under F–t
Given
F(t) over 10 ms; m = 0.45 kg; u = 0
To find
J, v, \(F_{\text{avg}}\)
Diagram or graph
Figure 3.3
Sign convention
Direction of the kick positive
Method
Integrate F over the contact time.
Detailed solution
  1. \(J=\int_0^{0.01}2500\sin\dfrac{\pi t}{0.01}dt=2500\cdot\dfrac{0.01}{\pi}\left[-\cos\dfrac{\pi t}{0.01}\right]_0^{0.01}=2500\cdot\dfrac{0.01}{\pi}\cdot2\).
  2. \(J=\dfrac{50}{\pi}=15.92\) N·s.
  3. \(v=J/m=15.92/0.45=35.4\) m/s.
  4. \(F_{\text{avg}}=J/\Delta t=15.92/0.01=1592\) N, \(2/\pi\) of the peak.
Justification
Derivation 3.3
Calculation
J = 15.9 N·s; v = 35.4 m/s; \(F_{\text{avg}}=1592\) N
Answer
15.9 N·s; 35.4 m/s; about 1590 N
Interpretation
The average of a half-sine is \(2/\pi\approx0.64\) of its peak.
Alternative method
Average force from the mean of sin over half a period, \(2/\pi\).
Common trap
Multiplying the peak force by the time (25 N·s).
Recognise it
Force–time graph or formula over a short contact.

Example 3.5

L3 JEE Main
Problem
A 0.2 kg ball moving at 10 m/s strikes a smooth wall at 60° to the normal and rebounds with the same speed at 60° on the other side. Contact lasts 0.01 s. Find the change of momentum and the average force on the wall.
Concepts tested
Oblique rebound
Given
m = 0.2 kg, v = 10 m/s, θ = 60°, Δt = 0.01 s
To find
|Δp|, \(F_{\text{avg}}\) on the wall
Diagram or graph
Figure 3.4
Sign convention
x along the outward normal
Method
Only the normal component reverses: \(|\Delta p|=2mv\cos\theta\).
Detailed solution
  1. Normal component before: \(-v\cos60^\circ=-5\) m/s; after: +5 m/s.
  2. \(\Delta p_x=0.2(5-(-5))=2\) N·s; \(\Delta p_y=0\).
  3. Force on the ball \(2/0.01=200\) N, out of the wall.
  4. Third law: the ball pushes the wall with 200 N into the wall.
Justification
Derivation 3.4
Calculation
|Δp| = 2 N·s; F = 200 N
Answer
2 N·s along the normal; 200 N on the wall, directed into it
Interpretation
A head-on bounce at the same speed would double this to 400 N.
Alternative method
Vector subtraction of the two momenta (each 2 kg·m/s, 120° apart before reversing).
Common trap
Using \(2mv=4\) N·s.
Recognise it
Angle to the normal given with equal speeds.

Example 3.6

L4 Advanced
Problem
Sand falls vertically at 5 kg/s onto a conveyor belt moving horizontally at a constant 2 m/s. Find the extra force the motor must supply, the extra power, and the rate at which the sand gains kinetic energy. Explain the difference.
Concepts tested
Variable mass: \(F=v\,dm/dt\)
Given
μ = 5 kg/s, v = 2 m/s
To find
F, P, rate of KE gain
Diagram or graph
Figure 3.5
Sign convention
Belt direction positive
Method
Momentum supplied per second gives F; P = Fv; KE rate = ½μv².
Detailed solution
  1. \(F=\mu v=5\times2=10\) N.
  2. \(P=Fv=10\times2=20\) W.
  3. KE gained per second: \(\tfrac12\mu v^2=\tfrac12\times5\times4=10\) W.
  4. The other 10 W is dissipated by friction while each grain slides on the belt before matching its speed — exactly half the work, whatever the friction.
Justification
Derivation 3.5
Calculation
10 N; 20 W; 10 W
Answer
10 N; 20 W; 10 W, the rest lost as heat
Interpretation
The force does not depend on how quickly the sand gets up to speed, only on the rate of arrival.
Why this method
Treating the belt-plus-sand stream with \(dp/dt\) avoids modelling the unknown friction on each grain.
Common trap
Using \(F=ma\) with a = 0 and concluding no force is needed.
Recognise it
Mass added or removed at a steady rate.

Example 3.7

L4 Advanced
Problem
A hose delivers water through a nozzle of area 2 cm² at 10 m/s. The jet strikes a wall normally. Find the force on the wall if (a) the water stops and runs down the wall, (b) it rebounds with the same speed. (ρ = 1000 kg/m³)
Concepts tested
Momentum flux \(\rho Av^2\)
Given
A = 2×10⁻⁴ m², v = 10 m/s
To find
Force in each case
Sign convention
Toward the wall positive
Method
Mass per second ρAv; momentum change per kilogram v or 2v.
Detailed solution
  1. Mass flow \(\rho Av=1000\times2\times10^{-4}\times10=2\) kg/s.
  2. (a) Each kilogram loses 10 kg·m/s: \(F=2\times10=20\) N.
  3. (b) Each kilogram changes by 20 kg·m/s: \(F=40\) N.
Justification
Derivation 3.5
Calculation
20 N; 40 N
Answer
(a) 20 N; (b) 40 N
Interpretation
Doubling the jet speed quadruples the force (both the mass rate and the momentum per kilogram double).
Why this method
The flux form avoids following individual drops.
Common trap
Using \(\rho Av\) (the mass rate) as the force.
Recognise it
Jets, streams, fans, hoses.

Example 3.8

L5 Advanced challenge
Problem
A uniform chain of length 1 m and mass 2 kg hangs vertically with its lower end just touching a table. It is released. Find the force exerted on the table when 0.4 m of chain has fallen onto it.
Concepts tested
Variable mass; momentum flux plus static weight
Given
λ = 2 kg/m, x = 0.4 m, g = 10 m/s²
To find
Force on the table
Sign convention
Down positive
Method
The falling part is in free fall, \(v^2=2gx\). Force = weight of chain already on the table + rate at which momentum is brought to rest, \(\lambda v^2\).
Detailed solution
  1. The hanging part falls freely (nothing pulls it: the links landing below do not tug on it): when x has landed, its speed is \(v=\sqrt{2gx}\).
  2. Static part: weight of the chain on the table \(\lambda gx=2\times10\times0.4=8\) N.
  3. Impact part: mass arriving per second \(\lambda v\), each kilogram stopped from v: \(F_{\text{imp}}=\lambda v^2=\lambda(2gx)=2\times8=16\) N.
  4. Total \(F=\lambda gx+2\lambda gx=3\lambda gx=24\) N.
Justification
Derivation 3.5 applied to the arriving links
Calculation
8 + 16 = 24 N
Answer
24 N, three times the weight of the chain already on the table
Interpretation
Just before the last link lands the force is \(3\lambda gL=60\) N, three times the chain’s weight; it then drops to 20 N.
Why this method
Splitting into “weight on the table” plus “momentum flux” turns a variable-mass problem into two one-line terms.
Common trap
Counting only the weight already on the table (8 N).
Recognise it
Chain or rope falling onto a surface.

Exercise 3

Q3.1L1Numerical · F = ma · 1 min

What net force gives a 4 kg body an acceleration of 2.5 m/s²?

Solution
10 N.
Q3.2L1Single correct · units · 1 min

The SI unit of momentum is equivalent to

(A) N·m(B) N·s(C) N/s(D) kg·m/s²
Solution
(B).
Q3.3L1Numerical · stopping force · 1 min

A 1000 kg car moving at 15 m/s is stopped in 5 s. Find the average braking force.

Solution
\(\Delta p/\Delta t=15000/5=\) 3000 N.
Q3.4L2Numerical · impulse · 2 min

A 0.15 kg cricket ball arriving at 20 m/s is hit straight back at 30 m/s. Find the impulse and the average force if contact lasts 0.005 s.

Solution
\(J=0.15(30+20)=\) 7.5 N·s; \(F=7.5/0.005=\) 1500 N.
Q3.5L2Numerical · F–t graph · 2 min

A force on a 2 kg body at rest rises linearly from 0 to 10 N in 4 s and then stays at 10 N for 2 s. Find the speed at 6 s.

Solution
Area \(=\tfrac12(4)(10)+10(2)=40\) N·s; \(v=40/2=\) 20 m/s.
Q3.6L3Numerical · variable force · 2 min

A force \(F=(6t-2)\) N acts on a 1 kg body initially at rest, for 0 ≤ t ≤ 3 s. Find its velocity at 3 s.

Solution
\(v=\int_0^3(6t-2)dt=27-6=\) 21 m/s.
Q3.7L3Numerical · machine gun · 2 min

A machine gun fires 40 g bullets at 1200 m/s. The gunner can hold it with at most 144 N. How many bullets per second can be fired?

Solution
\(n\times0.04\times1200=144\Rightarrow n=\) 3 per second.
Q3.8L4Numerical · oblique impulse · 3 min

A 0.5 kg ball moving at 4 m/s along +x is struck so that it moves at 3 m/s along +y. Find the magnitude and direction of the impulse.

Solution
\(\vec J=m(\vec v_2-\vec v_1)=0.5(-4,3)=(-2,1.5)\) N·s: 2.5 N·s at 143.1° to +x.
Q3.9L4Multiple correct · second law · 3 min

A body moves with constant speed along a circle. Which statements are true?

(A) Its momentum is constant(B) The net force on it is nonzero(C) The net force is perpendicular to the velocity(D) The magnitude of its momentum is constant
Solution
(B), (C), (D). The direction of \(\vec p\) changes, so a net force (centripetal) acts, perpendicular to \(\vec v\).
Q3.10L5Numerical · rocket thrust · 3 min

A 1000 kg rocket on the launch pad ejects gas at 2000 m/s relative to it. What mass of gas per second must it eject (a) just to lift off, (b) to rise with initial acceleration 10 m/s²?

Solution
Thrust \(u\,dm/dt\). (a) \(2000\,\mu=10^4\Rightarrow\mu=\) 5 kg/s. (b) \(2000\,\mu-10^4=10^3\times10\Rightarrow\mu=\) 10 kg/s.

Chapter 4 · Newton’s third law

4.1 Action and reaction

The basic idea

Push a wall and the wall pushes back on your hand; you feel it. Step off a small boat and the boat moves backward. Forces always come in pairs because a force is an interaction between two bodies: if A pushes B, then B pushes A, equally hard and in the opposite direction. Calling one “action” and the other “reaction” is only a habit; neither comes first.

Third law

To every action there is an equal and opposite reaction: if body A exerts a force \(\vec F_{BA}\) on body B, then B exerts on A the force \(\vec F_{AB}=-\vec F_{BA}\).

Derivation 4.1 · Finding the partner of a force (book on a table)
  1. Name every force with two labels, “by X on Y”. The partner of “by X on Y” is always “by Y on X” — same kind, equal, opposite.
  2. Forces on the book (Figure 4.1, left): W = weight, by the Earth on the book; N = normal force, by the table on the book.
  3. Partner of W: the gravitational pull by the book on the Earth, W′, acting at the Earth’s centre, upward.
  4. Partner of N: the push by the book on the table, N′, downward on the table top.
  5. N and W are equal here only because the book is in equilibrium (first law). They act on the same body and are of different kinds, so they cannot be a third-law pair. In a lift accelerating upward, N exceeds W, while N = N′ and W = W′ still hold exactly.
\[ \vec F_{\text{by }A\text{ on }B}=-\vec F_{\text{by }B\text{ on }A}\quad(\text{same kind, different bodies, same line}). \]
bookon the bookN (table on book)W (Earth on book)their partnersN′ (book on table)EarthW′ (book on Earth)

Figure 4.1 · Derivation 4.1. The two forces on the book, N and W, are equal and opposite but are not a third-law pair: they act on the same body and are of different kinds. The partner of N is N′ on the table; the partner of W is W′, the book’s pull on the Earth.

4.2 Properties of action–reaction pairs

The basic idea

Because the two forces of a pair act on different bodies, they never cancel each other in the equation of motion of either body. They cancel only when both bodies are treated together as one system — and then they are internal forces and drop out altogether.

PropertyAction–reaction pairTwo balancing forces on one body
Bodies acted onTwo different bodiesThe same body
Kind of forceAlways the same kind (both normal, both gravitational…)May differ (normal and gravity)
MagnitudesAlways equalEqual only in equilibrium along that line
TimingSimultaneous; both exist or neither doesIndependent
Cancel in a body’s FBD?Never (only one of them appears)Yes
Table 4.1 · Third-law pairs versus balancing forces.

4.3 The third law and conservation of momentum

The basic idea

When two bodies interact, the force on each changes its momentum. Because the forces are equal and opposite and act for exactly the same time, the momentum gained by one is exactly the momentum lost by the other. With no outside forces, the total momentum of the pair never changes, however violent the interaction.

Derivation 4.2 · Momentum conservation from the third law
  1. Bodies 1 and 2 interact; \(\vec F_{12}\) is the force by 2 on 1, \(\vec F_{21}\) by 1 on 2. External forces: \(\vec F_1^{\text{ext}}\), \(\vec F_2^{\text{ext}}\).
  2. Second law for each: \(\dfrac{d\vec p_1}{dt}=\vec F_{12}+\vec F_1^{\text{ext}}\), \(\dfrac{d\vec p_2}{dt}=\vec F_{21}+\vec F_2^{\text{ext}}\).
  3. Add: \(\dfrac{d}{dt}(\vec p_1+\vec p_2)=(\vec F_{12}+\vec F_{21})+\vec F^{\text{ext}}\).
  4. Third law: \(\vec F_{12}+\vec F_{21}=\vec 0\). So \(\dfrac{d\vec P}{dt}=\vec F^{\text{ext}}\), with \(\vec P=\vec p_1+\vec p_2\).
  5. If \(\vec F^{\text{ext}}=\vec 0\): \(\vec P\) is constant. Carts of Figure 4.2 start at rest: afterwards \(2\times(-1)+1\times(+2)=0\) ✓.
  6. The same steps for N bodies: internal forces cancel in pairs, and \(d\vec P/dt=\vec F^{\text{ext}}\).
\[ \frac{d\vec P}{dt}=\vec F^{\text{ext}};\qquad \vec F^{\text{ext}}=\vec 0\Rightarrow m_1\vec v_1+m_2\vec v_2=\text{constant}. \]
m₁ = 2 kgm₂ = 1 kgF₁₂F₂₁ = −F₁₂v₁ = 1 m/sv₂ = 2 m/s

Figure 4.2 · Derivation 4.2. A compressed spring pushes two carts apart on a smooth floor. The forces on them are equal and opposite at every instant, so the momenta gained are equal and opposite: 2 kg × 1 m/s = 1 kg × 2 m/s, and the total momentum stays zero.

4.4 Recoil

The basic idea

A gun kicks back when it fires, a hose pushes back on the firefighter, a rocket moves forward by throwing gas backward. In each case something is pushed one way and, by the third law, pushes back. Momentum conservation gives the recoil speed without knowing the force.

Derivation 4.3 · Recoil velocity
  1. Gun of mass M and bullet of mass m at rest: total momentum 0. The explosion is internal; horizontal external force negligible during firing.
  2. After: bullet velocity \(\vec v\), gun velocity \(\vec V\). Conservation: \(m\vec v+M\vec V=\vec 0\Rightarrow\vec V=-\dfrac mM\vec v\) (Figure 4.3).
  3. The gun moves opposite to the bullet with speed \(mv/M\), small because M ≫ m.
  4. Kinetic energies: \(\dfrac{K_{\text{gun}}}{K_{\text{bullet}}}=\dfrac{\tfrac12MV^2}{\tfrac12mv^2}=\dfrac mM\): the light bullet gets nearly all the energy, though the momenta are equal.
\[ V=\frac{m}{M}\,v\ (\text{opposite to }v),\qquad \frac{K_{\text{gun}}}{K_{\text{bullet}}}=\frac mM . \]
gun Mbullet m, vrecoil V = mv/M

Figure 4.3 · Derivation 4.3. Before firing the total momentum is zero; afterwards the bullet carries mv forward and the gun MV backward, with MV = mv.

4.5 Internal and external forces: the horse-and-cart puzzle

The basic idea

“If the cart pulls the horse back as hard as the horse pulls the cart forward, how can they ever move?” The answer is that the two equal forces act on different bodies. To decide whether the horse–cart system accelerates, look only at the external forces on it: the ground pushes the horse forward (the hooves push the ground back), and the ground resists the cart.

Derivation 4.4 · Horse and cart
  1. Horse 500 kg, cart 300 kg, accelerating at 1 m/s²; road resistance on the cart R = 200 N; tension in the traces T (Figure 4.4).
  2. Cart alone: \(T-R=m_ca\Rightarrow T=300\times1+200=500\) N.
  3. Horse alone: forward ground force P, backward pull T from the cart: \(P-T=m_ha\Rightarrow P=500+500\times1=1000\) N.
  4. System (horse + cart): T is internal and cancels: \(P-R=(m_h+m_c)a\Rightarrow1000-200=800\times1\) ✓.
  5. The system accelerates because the external force P exceeds R, not because T exceeds its reaction.
\[ \sum\vec F^{\text{ext}}=M_{\text{total}}\,\vec a\quad(\text{common acceleration; internal forces cancel}). \]
cart 300 kghorse 500 kgT on cartT on horseR = 200 Nground pushes horse

Figure 4.4 · Derivation 4.4. Horse and cart pull on each other with equal and opposite forces T, which cancel for the pair. What accelerates the system forward is the external push of the ground on the horse’s hooves, exceeding the resistance on the cart.

Solved examples 4.1–4.5

Example 4.1

L1 Foundation
Problem
A bird sits on a branch. Name the third-law partner of (a) the weight of the bird, (b) the normal force of the branch on the bird.
Concepts tested
Identifying pairs
Given
Bird at rest on a branch
To find
Partners of W and N
Sign convention
—
Method
Swap “by” and “on” for each force.
Detailed solution
  1. (a) W is “by the Earth on the bird”. Partner: “by the bird on the Earth”, an upward gravitational pull on the Earth, equal to W.
  2. (b) N is “by the branch on the bird”. Partner: “by the bird on the branch”, a downward push on the branch, equal to N.
  3. N and W act on the same bird and are not partners, although here they are equal.
Justification
Derivation 4.1
Calculation
—
Answer
(a) The bird’s upward pull on the Earth; (b) the bird’s downward push on the branch
Interpretation
The branch bends because of the bird’s push on it, not because of the bird’s weight acting on it directly.
Alternative method
—
Common trap
Calling N the reaction to W.
Recognise it
“Reaction to the weight”.

Example 4.2

L2 Basic application
Problem
A 4 kg rifle fires a 20 g bullet at 400 m/s. Find the recoil velocity of the rifle and compare the kinetic energies.
Concepts tested
Recoil, momentum conservation
Given
M = 4 kg, m = 0.02 kg, v = 400 m/s
To find
V; \(K_{\text{rifle}}/K_{\text{bullet}}\)
Diagram or graph
Figure 4.3
Sign convention
Bullet direction positive
Method
\(mv+MV=0\).
Detailed solution
  1. \(0.02\times400+4V=0\Rightarrow V=-8/4=-2\) m/s.
  2. \(K_{\text{bullet}}=\tfrac12(0.02)(400)^2=1600\) J; \(K_{\text{rifle}}=\tfrac12(4)(2)^2=8\) J.
  3. Ratio \(8/1600=1/200=m/M\) ✓.
Justification
Derivation 4.3
Calculation
V = 2 m/s backward; 8 J vs 1600 J
Answer
2 m/s backward; the rifle has 1/200 of the bullet’s kinetic energy
Interpretation
Equal momenta, very unequal energies.
Alternative method
—
Common trap
Equating kinetic energies instead of momenta.
Recognise it
“Recoil”, “fires”, “explodes from rest”.

Example 4.3

L2 Basic application
Problem
A 60 kg man and a 40 kg boy stand at rest on smooth ice and push each other apart. The man moves off at 2 m/s. Find the boy’s velocity. If the push lasted 0.5 s, find the average force on each.
Concepts tested
Momentum conservation; equal and opposite forces
Given
\(m_1=60\), \(m_2=40\) kg, \(v_1=2\) m/s, Δt = 0.5 s
To find
\(v_2\); average force
Sign convention
Man’s direction positive
Method
Total momentum stays zero; impulse on each equals its momentum change.
Detailed solution
  1. \(60(2)+40v_2=0\Rightarrow v_2=-3\) m/s.
  2. Man: \(\Delta p=120\) N·s, so \(F=120/0.5=240\) N.
  3. Boy: \(\Delta p=-120\) N·s, \(F=-240\) N: equal and opposite ✓.
Justification
Derivation 4.2
Calculation
\(v_2=-3\) m/s; 240 N each
Answer
The boy moves at 3 m/s the other way; each feels 240 N
Interpretation
The lighter person moves faster; the forces are equal regardless of who “does the pushing”.
Alternative method
—
Common trap
Thinking the heavier man pushes harder.
Recognise it
Two bodies push apart from rest.

Example 4.4

L3 JEE Main
Problem
A 500 kg horse pulls a 300 kg cart, both accelerating at 1 m/s². The road exerts a resistive force of 200 N on the cart. Find the tension in the traces and the forward force of the ground on the horse.
Concepts tested
Separate FBDs; internal forces
Given
\(m_h=500\), \(m_c=300\) kg, a = 1 m/s², R = 200 N
To find
T, P
Diagram or graph
Figure 4.4
Sign convention
Forward positive
Method
Cart equation gives T; horse equation gives P; check with the system equation.
Detailed solution
  1. Cart: \(T-200=300(1)\Rightarrow T=500\) N.
  2. Horse: \(P-T=500(1)\Rightarrow P=1000\) N.
  3. System: \(P-R=1000-200=800=(800)(1)\) ✓.
Justification
Derivation 4.4
Calculation
T = 500 N; P = 1000 N
Answer
Tension 500 N; ground force on the horse 1000 N forward
Interpretation
The cart pulls back on the horse with exactly 500 N, yet both accelerate.
Alternative method
System first for a; then one body for T.
Common trap
Concluding nothing can move because T and its reaction cancel.
Recognise it
Two bodies linked, one external driving force.

Example 4.5

L4 Advanced
Problem
An 80 kg astronaut is at rest 20 m from her spacecraft, with no tether. She throws a 2 kg wrench directly away from the craft at 8 m/s. How long does she take to reach the craft? What would change if she threw it at an angle of 60° to the line toward the craft (still away from it)?
Concepts tested
Recoil in free space; components
Given
M = 80 kg, m = 2 kg, v = 8 m/s, distance 20 m
To find
Time to reach the craft; effect of an angled throw
Sign convention
Toward the craft positive
Method
\(MV=mv\) along the line; uniform motion afterwards.
Detailed solution
  1. Total momentum zero: \(80V=2\times8\Rightarrow V=0.2\) m/s toward the craft.
  2. No forces afterwards: uniform motion, \(t=20/0.2=100\) s.
  3. Angled throw: the component of the wrench’s velocity along the line is \(8\cos60^\circ=4\) m/s, so her component toward the craft is \(80V_x=2\times4\Rightarrow V_x=0.1\) m/s.
  4. She also drifts sideways at \(2\times8\sin60^\circ/80=0.173\) m/s, so she misses the craft unless she corrects: in the 200 s it would take to close 20 m she drifts 34.6 m sideways.
Justification
Derivation 4.3 in two dimensions
Calculation
0.2 m/s; 100 s; angled: 0.1 m/s along, 0.173 m/s across
Answer
100 s; an angled throw halves her closing speed and sends her sideways, so she would miss
Interpretation
The only way to move in empty space is to push something away.
Why this method
Momentum conservation needs only masses and velocities; the force of the throw never enters.
Common trap
Thinking she can swim through empty space.
Recognise it
Isolated system, initially at rest.

Exercise 4

Q4.1L1Single correct · third law · 1 min

A book rests on a table. The reaction to the weight of the book is

(A) the normal force of the table on the book(B) the force of the book on the table(C) the gravitational force of the book on the Earth(D) the weight of the table
Solution
(C).
Q4.2L1Numerical · recoil · 1 min

A 5 kg gun fires a 50 g bullet at 300 m/s. Find the recoil speed.

Solution
\(0.05\times300/5=\) 3 m/s.
Q4.3L2Numerical · explosion · 2 min

A 3 kg shell at rest explodes into two pieces of 1 kg and 2 kg. The 1 kg piece flies off at 20 m/s. Find the speed of the other piece.

Solution
\(1\times20=2v\Rightarrow v=\) 10 m/s, opposite.
Q4.4L2Assertion–reason · pairs · 2 min

Assertion: Action and reaction never cancel each other. Reason: They act on different bodies.

(A) Both true, R explains A(B) Both true, R does not explain A(C) A true, R false(D) A false, R true
Solution
(A).
Q4.5L3Numerical · boat · 2 min

A 50 kg person jumps horizontally at 4 m/s from a 200 kg boat at rest on still water. Find the boat’s velocity.

Solution
\(50\times4=200V\Rightarrow V=\) 1 m/s, opposite to the jump.
Q4.6L3Numerical · train of wagons · 2 min

An engine pulls three identical 10 000 kg wagons with acceleration 0.5 m/s² on frictionless track. Find the force of the engine on the first wagon and of the first on the second.

Solution
Engine on wagon 1 pulls 3 wagons: \(30000\times0.5=\) 15 000 N; wagon 1 on wagon 2 pulls 2: 10 000 N.
Q4.7L4Multiple correct · Earth and apple · 3 min

A 0.2 kg apple falls toward the Earth. Which statements are true?

(A) The apple pulls the Earth with 2 N(B) The Earth accelerates toward the apple(C) The Earth’s acceleration is negligible because its mass is huge(D) The apple’s pull on the Earth is negligible
Solution
(A), (B), (C). The forces are equal (2 N); the Earth’s acceleration \(2/(6\times10^{24})\) is negligible, not the force.
Q4.8L5Numerical · three-piece explosion · 4 min

A 6 kg body at rest explodes into three pieces. A 1 kg piece moves along +x at 30 m/s and a 2 kg piece along +y at 20 m/s. Find the velocity of the third piece.

Solution
Third mass 3 kg: \(3\vec v=-(30,40)\Rightarrow\vec v=(-10,-13.3)\) m/s, speed 16.7 m/s at 233.1° from +x (opposite to (3, 4)).

Chapter 5 · Weight, normal force and apparent weight

5.1 Weight and mass

The basic idea

Mass and weight are different quantities that everyday language mixes up. Mass measures inertia and is the same everywhere. Weight is the gravitational force of the Earth (or the Moon, or whatever planet) on the body: \(W=mg\), a force in newtons, directed toward the centre of the planet. A 60 kg astronaut has mass 60 kg on the Moon too, but weighs only about 100 N there instead of 600 N.

PropertyMass mWeight W = mg
What it measuresInertia (and amount of matter)Gravitational pull on the body
TypeScalarVector, toward the planet’s centre
UnitkgN
Changes from place to place?NoYes, with g
Measured byBeam balance (compares masses)Spring balance (measures a force)
Table 5.1 · Mass versus weight.

5.2 The normal force

The basic idea

A surface pushes on anything pressed against it, perpendicular to the surface. This normal force (“normal” means perpendicular) is produced by tiny compressions of the surface, like a very stiff spring. Its size is not fixed in advance: it adjusts itself to whatever value stops the body from moving into the surface. That is why it must always be found from the equations of motion, never assumed equal to mg.

Derivation 5.1 · Normal force with extra vertical forces
  1. Block of mass m resting on a horizontal floor, at rest vertically: \(a_y=0\).
  2. Pushed down with force F (Figure 5.1, left): \(N-mg-F=0\Rightarrow N=mg+F\).
  3. Pulled up by a string with tension T < mg (right): \(N+T-mg=0\Rightarrow N=mg-T\).
  4. As T rises to mg, N falls to zero: the block is about to leave the floor. A surface can only push, so N ≥ 0; if the equations give N < 0, the body has lost contact.
  5. On a smooth incline of angle θ (Chapter 10) the same reasoning perpendicular to the surface gives \(N=mg\cos\theta\).
\[ N=mg+F\ (\text{push down}),\qquad N=mg-T\ (\text{pull up}),\qquad N\ge0\ \text{while in contact}. \]
mFmgNpush down: N = mg + FmTmgpull up: N = mg − TN

Figure 5.1 · Derivation 5.1. The normal force is not automatically mg: it is whatever the surface must supply to stop the block accelerating into it. Pushing down increases it; pulling up reduces it, to zero when T = mg.

5.3 Apparent weight in a lift

The basic idea

You never feel your weight directly; you feel the floor pushing up on you. That push, read by a bathroom scale, is your apparent weight. In a lift that starts upward the floor must both hold you up and speed you up, so it pushes harder and you feel heavier; when it slows on the way up (or starts downward) you feel lighter. In free fall the floor need not push at all: you feel weightless, though gravity still acts.

Derivation 5.2 · Scale reading in an accelerating lift
  1. Person of mass m stands on a scale in a lift whose acceleration is a (upward positive) (Figure 5.2). Forces on the person: N up (from the scale), mg down.
  2. The person shares the lift’s acceleration: \(N-mg=ma\Rightarrow N=m(g+a)\).
  3. The scale reads N (by the third law the person pushes the scale down with N).
  4. Cases: accelerating up or decelerating while going down: a > 0, N > mg. Uniform motion: N = mg. Accelerating down or decelerating going up: a < 0, N < mg. Free fall (a = −g): N = 0.
  5. If the lift accelerates down faster than g, N would be negative: the person leaves the floor and presses on the ceiling.
  6. Only the acceleration matters, not the velocity: Figure 5.3 shows a whole journey.
\[ N=m(g+a)\quad(a\ \text{upward positive}),\qquad g_{\text{eff}}=g+a . \]
N (scale)mgalift

Figure 5.2 · Derivation 5.2. The scale reads the normal force N it exerts on the person. With the lift accelerating upward at a, N − mg = ma, so the reading exceeds the weight.

0200400600800024681012t (s)scale reading (N)a = +2: 720 Nuniform: 600 N = mga = −1.6: 504 N

Figure 5.3 · Derivation 5.2 for a 60 kg person in a lift that accelerates upward at 2 m/s² for 2 s, moves uniformly at 4 m/s for 6 s, then slows at 1.6 m/s² for 2.5 s. The reading is m(g + a) throughout.

5.4 Spring balances and weighing machines

The basic idea

A spring balance reads the tension in its spring; a platform scale reads the normal force on its platform. Neither reads the true weight unless the body is in equilibrium in an inertial frame. A beam balance, which compares two masses under the same g, gives the same answer in an accelerating lift because both pans are affected equally — it measures mass, not weight.

InstrumentReadsIn a lift with acceleration a (up)
Platform scaleNormal force Nm(g + a)
Spring balance (body hanging)Spring tension Tm(g + a)
Beam balanceMass (by comparison)Unchanged (balances while a > −g)
Table 5.2 · What weighing instruments measure.

Solved examples 5.1–5.5

Example 5.1

L1 Foundation
Problem
An astronaut has mass 70 kg. Find her mass and weight on the Moon, where g = 1.6 m/s².
Concepts tested
Mass versus weight
Given
m = 70 kg, \(g_M=1.6\) m/s²
To find
Mass and weight on the Moon
Sign convention
—
Method
Mass is unchanged; W = mg with the Moon’s g.
Detailed solution
  1. Mass is a property of the body: 70 kg on the Moon.
  2. Weight: \(W=mg_M=70\times1.6=112\) N.
  3. On Earth: \(70\times10=700\) N; the Moon value is 0.16 of it.
Justification
§5.1
Calculation
70 kg; 112 N
Answer
Mass 70 kg; weight 112 N
Interpretation
She is just as hard to push sideways on the Moon, though easier to lift.
Alternative method
—
Common trap
Quoting the weight in kg.
Recognise it
“Mass and weight on another planet”.

Example 5.2

L2 Basic application
Problem
A 60 kg man stands on a weighing scale in a lift. Find the reading when the lift (a) accelerates upward at 2 m/s², (b) moves up at a steady 3 m/s, (c) accelerates downward at 2 m/s², (d) falls freely.
Concepts tested
Apparent weight
Given
m = 60 kg; a = +2, 0, −2, −10 m/s²
To find
N in each case
Diagram or graph
Figure 5.2
Sign convention
Up positive
Method
N = m(g + a).
Detailed solution
  1. (a) \(N=60(10+2)=720\) N.
  2. (b) a = 0: \(N=600\) N; the steady velocity is irrelevant.
  3. (c) \(N=60(10-2)=480\) N.
  4. (d) \(N=60(10-10)=0\).
Justification
Derivation 5.2
Calculation
720, 600, 480, 0 N
Answer
720 N; 600 N; 480 N; 0
Interpretation
Scales marked in kg would show 72, 60, 48 and 0 kg.
Alternative method
—
Common trap
Using the velocity instead of the acceleration.
Recognise it
Person or object on a scale in a lift.

Example 5.3

L3 JEE Main
Problem
In a lift going up, a 50 kg student’s scale reads 600 N for the first 3 s, then 500 N for 5 s, then 400 N until the lift stops. Find the maximum speed and the total height.
Concepts tested
Reading accelerations from apparent weight
Given
m = 50 kg; readings 600, 500, 400 N
To find
\(v_{\max}\), total height
Sign convention
Up positive
Method
a = N/m − g in each stage; then kinematics stage by stage.
Detailed solution
  1. Stage 1: \(a=600/50-10=2\) m/s² for 3 s: \(v=6\) m/s, \(h_1=\tfrac12(2)(9)=9\) m.
  2. Stage 2: \(a=0\) for 5 s: \(h_2=6\times5=30\) m.
  3. Stage 3: \(a=400/50-10=-2\) m/s²: stops in \(6/2=3\) s, \(h_3=6^2/(2\times2)=9\) m.
  4. Total \(=9+30+9=48\) m; maximum speed 6 m/s.
Justification
Derivation 5.2, then constant-acceleration kinematics
Calculation
6 m/s; 48 m
Answer
6 m/s; 48 m
Interpretation
The scale is an accelerometer: N/m − g is the lift’s acceleration.
Alternative method
Area under the v–t trapezoid: \(\tfrac12(6)(3)+6(5)+\tfrac12(6)(3)=48\) m.
Common trap
Taking 600 N as the weight.
Recognise it
Several scale readings during one journey.

Example 5.4

L3 JEE Main
Problem
A 2 kg box rests on a 3 kg box on the floor of a lift accelerating upward at 2 m/s². Find the force between the boxes and the force of the floor on the lower box.
Concepts tested
Normal forces in a stack; system and single-body equations
Given
\(m_1=2\) kg (top), \(m_2=3\) kg, a = 2 m/s² up
To find
\(N_{12}\), \(N_{\text{floor}}\)
Sign convention
Up positive
Method
Top box alone for \(N_{12}\); both boxes together for the floor force.
Detailed solution
  1. Top box: \(N_{12}-20=2(2)\Rightarrow N_{12}=24\) N.
  2. Both boxes: \(N_{\text{floor}}-50=5(2)\Rightarrow N_{\text{floor}}=60\) N.
  3. Check on the lower box alone: \(60-24-30=6=3(2)\) ✓.
Justification
Derivation 5.2, applied to each body
Calculation
24 N; 60 N
Answer
24 N between the boxes; 60 N from the floor
Interpretation
Each normal force is \(g+a=12\) times the mass above it.
Alternative method
\(N=m_{\text{above}}(g+a)\).
Common trap
Forgetting the 24 N downward push of the top box in the lower box’s FBD.
Recognise it
Stacked bodies sharing an acceleration.

Example 5.5

L4 Advanced
Problem
A 500 kg lift carrying a 60 kg man is moving down at 4 m/s. It is brought to rest uniformly over 2 m. Find the tension in the cable and the scale reading of the man during the braking.
Concepts tested
Deceleration downward = acceleration upward
Given
\(M=500\) kg, m = 60 kg, u = −4 m/s, stops in 2 m
To find
Cable tension T, scale reading N
Sign convention
Up positive
Method
Kinematics for a; then system equation for T and the man’s equation for N.
Detailed solution
  1. \(v^2=u^2+2as\): \(0=16+2a(-2)\Rightarrow a=+4\) m/s² (upward, since the downward motion is slowing).
  2. Lift + man: \(T-560g=560a\Rightarrow T=560(14)=7840\) N.
  3. Man: \(N=60(10+4)=840\) N.
Justification
Derivation 5.2
Calculation
a = 4 m/s² up; T = 7840 N; N = 840 N
Answer
7840 N; 840 N
Interpretation
Braking while descending feels like accelerating upward: the man feels 40% heavier.
Why this method
The system equation gives T without needing the floor force on the man.
Common trap
Taking a as negative because the lift moves down.
Recognise it
“Moving down … brought to rest”.

Exercise 5

Q5.1L1Numerical · weight · 1 min

Find the weight of a 25 kg suitcase (g = 10 m/s²).

Solution
250 N.
Q5.2L1Single correct · free fall · 1 min

A man stands on a scale in a lift whose cable snaps. The scale reads

(A) his weight(B) twice his weight(C) zero(D) half his weight
Solution
(C). a = −g, so N = 0.
Q5.3L2Numerical · normal force · 1 min

A 4 kg block on a table is pressed down by a 15 N force. Find the normal force.

Solution
\(40+15=\) 55 N.
Q5.4L2Numerical · lift · 2 min

A spring balance in a lift shows 48 N for a 4 kg mass. Find the lift’s acceleration.

Solution
\(48=4(10+a)\Rightarrow a=\) 2 m/s² upward (accelerating up or decelerating down).
Q5.5L3Numerical · losing contact · 2 min

A 2 kg block on the floor is pulled up by a string whose tension rises as T = 5t N. When does the block leave the floor, and what is its acceleration 2 s later?

Solution
Leaves when 5t = 20: t = 4 s. At t = 6 s: \(a=(30-20)/2=\) 5 m/s².
Q5.6L3Multiple correct · apparent weight · 2 min

A person’s scale reading is less than her weight. The lift may be

(A) accelerating upward(B) moving upward and slowing(C) moving downward and speeding up(D) moving downward at constant speed
Solution
(B), (C). Both mean a downward acceleration.
Q5.7L4Numerical · ball in a lift · 3 min

A lift accelerates upward at 2 m/s². A ball is dropped from 2.4 m above its floor. Find the time to reach the floor and the man’s apparent weight (70 kg) in the lift.

Solution
Relative acceleration 12 m/s²: \(t=\sqrt{2(2.4)/12}=\) 0.632 s; \(N=70(12)=\) 840 N.
Q5.8L5Numerical · beam balance in a lift · 3 min

A beam balance in a lift accelerating upward at 4 m/s² balances a body against 5 kg of standard masses. A spring balance in the same lift supports the same body. Find the readings of both, and explain the difference.

Solution
Beam balance: 5 kg (both pans see g + a). Spring balance: \(5(14)=\) 70 N (7 kg if marked in kg at g = 10). The spring measures force, the beam compares masses.

Chapter 6 · Strings, tension and pulleys

6.1 Tension in a light string

The basic idea

A taut string pulls on whatever is tied to its ends, always along the string and always away from the body (a string can pull, never push). Inside the string every piece is pulled by its neighbours on both sides; that internal pull is the tension. For a light (“massless”) string the tension is the same at every point, which is why one symbol T is enough for the whole string.

Derivation 6.1 · A light string has the same tension throughout
  1. Take a short element of string of mass dm, pulled by tension \(T_1\) on one side and \(T_2\) on the other (Figure 6.1). Let it accelerate at a along the string.
  2. Second law for the element: \(T_2-T_1=(dm)\,a\).
  3. Light string: dm = 0, so \(T_2=T_1\), whatever the acceleration.
  4. Applying this to every element, T is the same along the whole string, from one end to the other.
  5. Inextensible string: the length does not change, so both ends move together along the string (Chapter 9 uses this).
\[ T_2-T_1=(dm)\,a\ \xrightarrow{\ dm\,=\,0\ }\ T_1=T_2 . \]
element dmT₁T₂T₂ − T₁ = (dm) a = 0 for a massless string

Figure 6.1 · Derivation 6.1. A short piece of string is pulled by the string on either side. Its equation of motion is T₂ − T₁ = (dm)a; for a light string dm = 0, so T₁ = T₂ everywhere, even while accelerating.

6.2 Heavy strings and ropes

The basic idea

A real rope has mass. Where it accelerates, each part of it must be pulled by the part ahead, so the tension is largest at the end being pulled and smallest at the far end. A hanging rope carries its own weight, so the tension grows with height. In both cases cut the rope at the point of interest and apply Newton’s law to one of the two pieces.

Derivation 6.2 · Tension along a rope pulling a block on a smooth floor
  1. Rope of mass \(m_r\) and length L (λ = \(m_r/L\)) pulls a block of mass M; the hand pulls the free end with F. Smooth floor.
  2. Whole system: \(a=\dfrac{F}{M+m_r}\).
  3. Cut the rope at distance x from the hand. The part beyond the cut has mass \(M+\lambda(L-x)\) and is pulled only by T(x): \(T(x)=[M+\lambda(L-x)]\,a\).
  4. So \(T(x)=F\,\dfrac{M+\lambda(L-x)}{M+\lambda L}\): F at the hand (x = 0), falling linearly to \(Ma\) at the block (x = L).
  5. Figure 6.2: \(m_r=2\) kg, L = 4 m, M = 3 kg, F = 25 N: a = 5 m/s², T = 25 − 2.5x N; 20 N at the middle, 15 N at the block.
\[ T(x)=F\,\frac{M+\lambda(L-x)}{M+\lambda L}\qquad(x\ \text{measured from the pulled end}). \]
05101520253001234x from the pulled end (m)tension (N)F = 25 N at the handmidpoint 20 Nblock end 15 N

Figure 6.2 · Derivation 6.2 with a 2 kg, 4 m rope pulling a 3 kg block (Example 6.3, a = 5 m/s²). The tension falls linearly along the rope because each piece must also accelerate the rope beyond it.

Derivation 6.3 · Tension in a hanging rope carrying a load
  1. A rope of linear density λ hangs vertically with a block of mass m at its lower end. The whole arrangement accelerates upward at a.
  2. Cut the rope at height y above the block (Figure 6.3). The piece below the cut has mass \(m+\lambda y\); forces on it: T(y) up, \((m+\lambda y)g\) down.
  3. \(T(y)-(m+\lambda y)g=(m+\lambda y)a\Rightarrow T(y)=(m+\lambda y)(g+a)\).
  4. At rest (a = 0) the tension at any height equals the weight hanging below that point.
  5. Tension is largest at the top: \((m+m_r)(g+a)\), where \(m_r\) is the rope’s mass.
\[ T(y)=(m+\lambda y)(g+a)\qquad(y\ \text{measured up from the load}). \]
mcut at height y above the blockT(y)ybelow the cut: m + λy

Figure 6.3 · Derivation 6.3. Cut the hanging rope at height y above the block. The part below the cut, of mass m + λy, is held by the tension there: T(y) = (m + λy)(g + a).

6.3 Ideal pulleys

The basic idea

A pulley lets a string change direction. If the pulley is light and its axle frictionless, it does this without changing the tension: the same T acts on both sides. A heavy pulley that spins needs a difference of tensions to accelerate its rotation (rigid-body dynamics, a later unit); in this unit every pulley is ideal unless stated otherwise.

Derivation 6.4 · Same tension on both sides of an ideal pulley
  1. A string passes over a pulley of radius R, with tensions \(T_1\) and \(T_2\) on the two sides (Figure 6.4).
  2. About the axle, the tensions give a net torque \((T_2-T_1)R\); the axle force passes through the axle and gives none; with no friction, nothing else does.
  3. Rotational second law: \((T_2-T_1)R=I\alpha\), where I is the pulley’s moment of inertia.
  4. Light pulley: I = 0, so \(T_1=T_2\) even while the pulley turns with angular acceleration.
  5. (Equivalently, if the string slides over a fixed smooth peg, there is no friction to change the tension.)
\[ (T_2-T_1)R=I\alpha\ \xrightarrow{\ I\,=\,0\ }\ T_1=T_2 . \]
T₁T₂torque (T₂ − T₁)R = Iα = 0

Figure 6.4 · Derivation 6.4. The string pulls the pulley down on both sides. A light (zero moment of inertia) frictionless pulley needs zero net torque, so T₁ = T₂: it changes the direction of the tension, not its size.

6.4 Force on a pulley and its support

The basic idea

The string presses on the pulley: each segment pulls the pulley along itself, away from the pulley. The clamp holding the pulley must supply the opposite of the sum of these pulls. When the two segments are parallel (a string hanging over a pulley with both ends down) the clamp holds 2T; when they meet at an angle, less.

Derivation 6.5 · Resultant of the two tensions on a pulley
  1. The two segments make angle θ with each other, each with tension T; both pull the pulley away from it, along the segments (Figure 6.5).
  2. Equal forces at angle θ: by Derivation 1.1, \(R=\sqrt{2T^2+2T^2\cos\theta}=2T\cos(\theta/2)\), along the bisector.
  3. For a light pulley in equilibrium (or accelerating with zero mass), the support force is \(-\vec R\).
  4. θ = 0 (parallel segments): R = 2T. θ = 90°: \(R=\sqrt2T\). θ = 180° (straight string): R = 0.
\[ F_{\text{support}}=2T\cos\frac\theta2\quad(\text{along the bisector, away from the string}). \]
TT2T cos(θ/2)supportθ

Figure 6.5 · Derivation 6.5. A string turns through 90° over a pulley, with tension T in both segments. The string pushes the pulley with 2T cos(θ/2) = √2 T along the bisector; the support must supply the equal and opposite force.

Solved examples 6.1–6.6

Example 6.1

L1 Foundation
Problem
A 5 kg block is lifted by a light string with an upward acceleration of 2 m/s². Find the tension.
Concepts tested
Tension with acceleration
Given
m = 5 kg, a = 2 m/s² up
To find
T
Sign convention
Up positive
Method
\(T-mg=ma\).
Detailed solution
  1. Forces on the block: T up, 50 N down.
  2. \(T-50=5\times2\Rightarrow T=60\) N.
Justification
Second law
Calculation
T = 60 N
Answer
60 N
Interpretation
More than the weight, because the string must also accelerate the block.
Alternative method
\(T=m(g+a)\).
Common trap
T = mg = 50 N.
Recognise it
Lifting or lowering with acceleration.

Example 6.2

L2 Basic application
Problem
A 2 kg block hangs from the ceiling by string A. A 1 kg block hangs from the 2 kg block by string B. Find the tensions (a) at rest, (b) when the whole arrangement is in a lift accelerating upward at 2 m/s².
Concepts tested
Strings in series
Given
\(m_{\text{upper}}=2\), \(m_{\text{lower}}=1\) kg
To find
\(T_A\), \(T_B\)
Sign convention
Up positive
Method
Lower block alone gives \(T_B\); both blocks together give \(T_A\).
Detailed solution
  1. (a) Lower: \(T_B=1\times10=10\) N. Both: \(T_A=3\times10=30\) N.
  2. (b) Lower: \(T_B-10=1\times2\Rightarrow T_B=12\) N. Both: \(T_A-30=3\times2\Rightarrow T_A=36\) N.
  3. Check upper block alone: \(36-12-20=4=2\times2\) ✓.
Justification
Derivation 6.3 with discrete masses
Calculation
(a) 30 N, 10 N; (b) 36 N, 12 N
Answer
(a) \(T_A=30\) N, \(T_B=10\) N; (b) 36 N, 12 N
Interpretation
Each tension is (mass hanging below) × (g + a).
Alternative method
—
Common trap
Giving the upper string only the upper block’s weight.
Recognise it
Masses hung one below another.

Example 6.3

L3 JEE Main
Problem
A 3 kg block on a smooth floor is pulled by a uniform rope of mass 2 kg and length 4 m; the far end of the rope is pulled horizontally with 25 N. Find the acceleration and the tension at the block and at the middle of the rope.
Concepts tested
Heavy rope
Given
M = 3 kg, \(m_r=2\) kg, L = 4 m, F = 25 N
To find
a, T(block), T(middle)
Diagram or graph
Figure 6.2
Sign convention
Direction of pull positive
Method
System for a; cut the rope and use the part beyond the cut.
Detailed solution
  1. \(a=25/(3+2)=5\) m/s².
  2. At the block: T accelerates only the block: \(T=3\times5=15\) N.
  3. At the middle: beyond the cut are the block and half the rope, 4 kg: \(T=4\times5=20\) N.
  4. Check with Derivation 6.2: \(T=25(3+0.5\times2)/5=20\) N ✓.
Justification
Derivation 6.2
Calculation
5 m/s²; 15 N; 20 N
Answer
a = 5 m/s²; 15 N at the block; 20 N at the middle
Interpretation
The tension drops by 2.5 N per metre: the rope’s own inertia.
Alternative method
Use the part between the hand and the cut: \(25-T=1\times5\Rightarrow T=20\) N.
Common trap
Taking the tension as 25 N everywhere.
Recognise it
Rope “of mass …”.

Example 6.4

L3 JEE Main
Problem
A light string passes over a fixed pulley; one segment is horizontal and the other vertical, and the tension is 20 N. Find the force exerted by the pulley’s clamp.
Concepts tested
Force on a pulley
Given
T = 20 N, θ = 90° between segments
To find
Clamp force
Diagram or graph
Figure 6.5
Sign convention
—
Method
Add the two tensions acting on the pulley.
Detailed solution
  1. Both segments pull the pulley away from it: 20 N along each segment.
  2. Resultant \(2T\cos45^\circ=2\times20\times0.707=28.3\) N, along the bisector (45° to each segment).
  3. The clamp must exert 28.3 N in the opposite direction.
Justification
Derivation 6.5
Calculation
28.3 N
Answer
28.3 N, at 45° between the directions opposite to the two segments
Interpretation
Not 40 N: the two pulls are not parallel.
Alternative method
Components: (20, −20) N, magnitude 28.3 N.
Common trap
Adding 20 + 20.
Recognise it
String bending round a pulley at an angle.

Example 6.5

L4 Advanced
Problem
A uniform rope 4 m long of mass 2 kg hangs vertically with a 3 kg block tied to its lower end. The top of the rope is pulled up so that the system accelerates upward at 2 m/s². Find the tension at the top and at the midpoint.
Concepts tested
Hanging heavy rope with acceleration
Given
λ = 0.5 kg/m, m = 3 kg, a = 2 m/s²
To find
T(top), T(midpoint)
Diagram or graph
Figure 6.3
Sign convention
Up positive
Method
\(T(y)=(m+\lambda y)(g+a)\) with y measured from the block.
Detailed solution
  1. \(g+a=12\) m/s².
  2. Top (y = 4 m): mass below \(3+2=5\) kg; \(T=5\times12=60\) N.
  3. Midpoint (y = 2 m): mass below \(3+1=4\) kg; \(T=4\times12=48\) N.
Justification
Derivation 6.3
Calculation
60 N; 48 N
Answer
60 N at the top; 48 N at the midpoint
Interpretation
At the block the tension is \(3\times12=36\) N; it rises by 6 N per metre up the rope.
Why this method
Cutting the rope and looking below the cut avoids writing an equation for every piece.
Common trap
Using g instead of g + a.
Recognise it
Heavy rope hanging with a load.

Example 6.6

L5 Advanced challenge
Problem
A 60 kg painter stands on a 20 kg platform. A rope tied to the platform passes over a fixed ideal pulley and the painter pulls down on its free end with 500 N. Find the acceleration and the force between the painter and the platform.
Concepts tested
Choosing the system; the rope pulls twice
Given
m = 60 kg, M = 20 kg, T = 500 N
To find
a, N
Sign convention
Up positive
Method
System (painter + platform): the rope pulls up on it at two places (the platform and the painter’s hands). Then the painter alone.
Detailed solution
  1. Rope tension T = 500 N everywhere (ideal pulley).
  2. System: upward forces T (on the platform) + T (on the painter’s hands): \(2T-(m+M)g=(m+M)a\).
  3. \(1000-800=80a\Rightarrow a=2.5\) m/s².
  4. Painter alone: T up (rope on hands), N up (platform), mg down: \(500+N-600=60\times2.5\Rightarrow N=250\) N.
  5. Check platform: \(500-250-200=50=20\times2.5\) ✓.
Justification
Second law for the system and for one body
Calculation
a = 2.5 m/s²; N = 250 N
Answer
2.5 m/s² upward; 250 N
Interpretation
He can lift himself and the platform with a 500 N pull, less than their combined 800 N weight, because the rope pulls on the system twice.
Why this method
Treating painter + platform as one system makes the internal force N drop out of the first equation.
Common trap
Counting the tension only once (a would be negative).
Recognise it
“Pulls himself up”, bosun’s chair.

Exercise 6

Q6.1L1Numerical · tension · 1 min

A 3 kg mass is lowered on a string with a downward acceleration of 4 m/s². Find the tension.

Solution
\(3(10-4)=\) 18 N.
Q6.2L1Single correct · ideal pulley · 1 min

For a light string over a light frictionless pulley, the tensions on the two sides are

(A) equal(B) in the ratio of the masses(C) equal only at rest(D) zero
Solution
(A).
Q6.3L2Numerical · clamp force · 1 min

A string over a pulley has both segments vertical, each with tension 30 N. Find the force on the pulley’s support.

Solution
60 N.
Q6.4L2Numerical · rope tension · 2 min

A uniform 6 m rope of mass 3 kg hangs from a ceiling. Find the tension 2 m below the ceiling.

Solution
Rope below: 4 m, 2 kg: 20 N.
Q6.5L3Numerical · breaking string · 2 min

A string can bear 90 N. With what greatest acceleration can it lift a 6 kg load?

Solution
\(90=6(10+a)\Rightarrow a=\) 5 m/s².
Q6.6L3Numerical · pulled rope · 2 min

A uniform rope of mass 4 kg lies on a smooth floor and is pulled at one end with 20 N. Find the tension at a quarter of its length from the pulled end.

Solution
a = 5 m/s²; beyond the cut 3 kg: 15 N.
Q6.7L4Numerical · minimum time · 3 min

A 10 kg load must be raised 20 m from rest using a rope that breaks at 150 N. Find the least time, if the load must arrive at rest and the rope must stay taut.

Solution
Accelerate at \(a_1=150/10-10=5\) m/s², then fall freely (T = 0, deceleration 10 m/s²). With peak speed v: \(v^2/10+v^2/20=20\Rightarrow v^2=133.3\), v = 11.55 m/s; \(t=v/5+v/10=\) 3.46 s.
Q6.8L5Numerical · man on a plank · 4 min

A 50 kg man on a 30 kg crate pulls on a rope that passes over a ceiling pulley and is tied to the crate. With what force must he pull to (a) hold the crate at rest, (b) raise it at 1 m/s²? Find the crate’s normal force on him in (b).

Solution
System: 2T − 800 = 80a. (a) T = 400 N. (b) 2T = 880, T = 440 N; man: 440 + N − 500 = 50(1) ⇒ N = 110 N.

Chapter 7 · Spring forces

7.1 Hooke’s law

The basic idea

Stretch a spring and it pulls back; squash it and it pushes out. For moderate deformations the force is proportional to the change of length from the natural length: twice the stretch, twice the force. The force always tries to restore the natural length, so it is called a restoring force. The constant of proportionality, the spring constant k, measures stiffness.

Derivation 7.1 · Hooke’s law and the sign of the spring force
  1. Let one end of a spring be fixed and the other displaced by x from the natural position (x > 0 stretch, x < 0 compression).
  2. Experiment (within the elastic limit): the force needed to hold the end is \(F_{\text{applied}}=kx\), a straight line through the origin (Figure 7.1).
  3. Third law: the spring pulls back on whatever holds its end with \(F_s=-kx\).
  4. Sign check: stretched (x > 0), \(F_s<0\), back toward the natural length; compressed (x < 0), \(F_s>0\), outward.
  5. Units and dimensions: k in N/m, \([k]=\mathrm{MT^{-2}}\).
  6. A light spring, like a light string (Derivation 6.1), exerts the same force kx at both ends.
\[ F_s=-kx,\qquad |F_s|=k\,|x|\ \text{at both ends of a light spring}. \]
−12−8−404812−0.06−0.04−0.0200.020.040.06x (m), stretch positiveF (N)you pull: +kxspring pulls back: −kxcompressed: pushes out

Figure 7.1 · Derivation 7.1 with k = 200 N/m. The force needed to stretch the spring by x is +kx; the spring’s own force on whatever holds its end is −kx, always back toward the natural length (a restoring force).

7.2 Springs in series and in parallel

The basic idea

Joining springs end to end (series) makes a softer spring: the same force stretches each one, and the stretches add. Placing them side by side so that they stretch together (parallel) makes a stiffer spring: the same stretch in each, and the forces add. This mirrors electrical resistors, but with the rules swapped.

Derivation 7.2 · Series combination
  1. Springs \(k_1\) and \(k_2\) end to end carry a load force F (Figure 7.2, left). Their junction is light, so each spring carries the same F.
  2. Extensions: \(x_1=F/k_1\), \(x_2=F/k_2\).
  3. Total extension \(x=x_1+x_2=F\left(\dfrac1{k_1}+\dfrac1{k_2}\right)\).
  4. Equivalent spring: \(F=kx\Rightarrow\dfrac1k=\dfrac1{k_1}+\dfrac1{k_2}\), i.e. \(k=\dfrac{k_1k_2}{k_1+k_2}\), smaller than either.
  5. The stiffer spring stretches less: \(x_1/x_2=k_2/k_1\).
\[ \frac1{k_s}=\frac1{k_1}+\frac1{k_2},\qquad k_s=\frac{k_1k_2}{k_1+k_2} . \]
Derivation 7.3 · Parallel combination
  1. Springs \(k_1\) and \(k_2\) side by side hold a rigid bar that stays level (Figure 7.2, right); both stretch by the same x.
  2. Forces: \(F_1=k_1x\), \(F_2=k_2x\); the bar needs \(F=F_1+F_2=(k_1+k_2)x\).
  3. Equivalent spring: \(k_p=k_1+k_2\), larger than either.
  4. The stiffer spring carries more of the load: \(F_1/F_2=k_1/k_2\).
\[ k_p=k_1+k_2 . \]
k₁k₂mseries: same F, extensions add1/k = 1/k₁ + 1/k₂k₁k₂mparallel: same x, forces addk = k₁ + k₂

Figure 7.2 · Derivations 7.2 and 7.3. In series every spring carries the same force and the extensions add; in parallel every spring has the same extension and the forces add.

7.3 Cutting a spring

The basic idea

A long spring is like many short springs in series. Cut it, and each piece is stiffer than the whole, because a given force now stretches fewer coils.

Derivation 7.4 · Spring constant of a piece
  1. A uniform spring of length L and constant k stretches by x under force F; each element stretches in proportion to its length.
  2. A piece of length ℓ under the same force stretches by \(x\ell/L\).
  3. Its constant: \(k_\ell=\dfrac{F}{x\ell/L}=k\dfrac L\ell\): \(k\ell=\) constant for a given spring.
  4. Check with series (Derivation 7.2): pieces \(L/3\) and \(2L/3\) have constants 3k and 3k/2; in series \(\dfrac1{3k}+\dfrac2{3k}=\dfrac1k\) ✓ (Figure 7.3).
\[ k_\ell=k\,\frac{L}{\ell}\qquad(k\ell=\text{constant}). \]
whole spring: length L, constant kL/3: 3k2L/3: 3k/2

Figure 7.3 · Derivation 7.4. Under a given force every piece of a uniform spring stretches in proportion to its length, so a piece of length ℓ has constant kL/ℓ: shorter pieces are stiffer.

7.4 Spring balances

The basic idea

A spring balance reads the force in its spring. If you pull its two ends with 10 N each in opposite directions, it reads 10 N, not 20 N — just as a rope pulled with 10 N at each end has tension 10 N. A balance placed between two accelerating bodies reads the force needed to accelerate the body on one side of it.

7.5 Springs do not change instantly

The basic idea

A string can go slack or become taut in an instant, so its tension can jump. A spring cannot: its force depends on its length, and its ends need time to move. So just after a string elsewhere in a system is cut, every spring still exerts the force it had just before. This makes “instantaneous acceleration” problems easy.

Derivation 7.5 · Accelerations just after a supporting string is cut
  1. Block A (2 kg) hangs from the ceiling by a string; block B (3 kg) hangs from A by a light spring (Figure 7.4).
  2. Before cutting: B in equilibrium, spring force \(kx=m_Bg=30\) N; string tension \(=(m_A+m_B)g=50\) N.
  3. Just after cutting: positions (and therefore x) have not changed, so the spring still pulls A down and B up with 30 N; the string force is now zero.
  4. A: \(m_Aa_A=20+30\Rightarrow a_A=25\) m/s² downward, more than g.
  5. B: \(30-30=0\Rightarrow a_B=0\) at that instant.
  6. Check: the system’s total force 50 N gives \((2\times25+3\times0)/5=10\) m/s² average = g ✓.
\[ \text{spring force continuous};\quad a_A=\frac{(m_A+m_B)g}{m_A},\quad a_B=0\ \ (\text{just after the cut}). \]
string (cut here)A 2 kgB 3 kgjust after the cut:A: 20 + 30 downa_A = 25 m/s²B: 30 − 30 = 0a_B = 0

Figure 7.4 · Derivation 7.5. A spring cannot change its length instantly, so just after the upper string is cut it still pulls A down and B up with 30 N. B stays balanced for that instant; A carries both forces and accelerates at 25 m/s².

Solved examples 7.1–7.6

Example 7.1

L1 Foundation
Problem
A spring of constant 200 N/m hangs vertically. Find its extension when a 0.4 kg mass hangs at rest from it.
Concepts tested
Hooke’s law; equilibrium
Given
k = 200 N/m, m = 0.4 kg
To find
x
Sign convention
Down positive
Method
\(kx=mg\).
Detailed solution
  1. Forces on the mass: spring kx up, mg = 4 N down.
  2. \(200x=4\Rightarrow x=0.02\) m.
Justification
Derivation 7.1
Calculation
x = 0.02 m
Answer
2 cm
Interpretation
Doubling the mass would double the extension (while elastic).
Alternative method
—
Common trap
Using the mass (0.4) instead of the weight (4 N).
Recognise it
“Extension of a spring”.

Example 7.2

L2 Basic application
Problem
Springs of constants 100 N/m and 300 N/m are joined (a) in series, (b) in parallel, and a 2 kg mass hangs at rest from the combination. Find the equivalent constant and the extension in each case.
Concepts tested
Series and parallel springs
Given
\(k_1=100\), \(k_2=300\) N/m, W = 20 N
To find
k and x for each arrangement
Diagram or graph
Figure 7.2
Sign convention
—
Method
Apply Derivations 7.2–7.3; then x = W/k.
Detailed solution
  1. Series: \(k=\dfrac{100\times300}{400}=75\) N/m; \(x=20/75=0.267\) m.
  2. Parallel: \(k=400\) N/m; \(x=20/400=0.05\) m.
  3. Series check: \(x_1=20/100=0.2\) m, \(x_2=20/300=0.067\) m, sum 0.267 m ✓.
Justification
Derivations 7.2–7.3
Calculation
75 N/m, 26.7 cm; 400 N/m, 5 cm
Answer
Series 75 N/m, 26.7 cm; parallel 400 N/m, 5 cm
Interpretation
Series is softer than the softer spring; parallel stiffer than the stiffer one.
Alternative method
—
Common trap
Swapping the series and parallel rules.
Recognise it
Two springs combined.

Example 7.3

L3 JEE Main
Problem
A spring of constant 60 N/m is cut into two pieces whose lengths are in the ratio 1 : 2. Find the constants of the pieces, and the constant when the two pieces are then used in parallel.
Concepts tested
Cutting a spring
Given
k = 60 N/m; lengths L/3 and 2L/3
To find
\(k_1\), \(k_2\), \(k_p\)
Diagram or graph
Figure 7.3
Sign convention
—
Method
\(k_\ell=kL/\ell\).
Detailed solution
  1. \(k_1=60\times3=180\) N/m.
  2. \(k_2=60\times\tfrac32=90\) N/m.
  3. Parallel: \(180+90=270\) N/m.
  4. Series check: \(\dfrac{180\times90}{270}=60\) N/m ✓.
Justification
Derivation 7.4
Calculation
180, 90, 270 N/m
Answer
180 N/m and 90 N/m; 270 N/m in parallel
Interpretation
Cutting and recombining in parallel makes the spring 4.5 times stiffer.
Alternative method
—
Common trap
Thinking the shorter piece has the smaller constant.
Recognise it
“Spring cut into pieces”.

Example 7.4

L3 JEE Main
Problem
Blocks of 2 kg and 3 kg on a smooth floor are joined by a light spring balance. A 20 N horizontal force pulls the 3 kg block. Once the system moves with a common acceleration, what does the balance read? What would it read if the force pulled the 2 kg block instead?
Concepts tested
Spring balance between accelerating bodies
Given
\(m_1=2\), \(m_2=3\) kg, F = 20 N
To find
Balance reading in each case
Sign convention
Direction of F positive
Method
Common acceleration from the system; the balance force accelerates the block it pulls.
Detailed solution
  1. \(a=20/5=4\) m/s² in both cases.
  2. F on the 3 kg block: the balance pulls the 2 kg block: reading \(2\times4=8\) N.
  3. F on the 2 kg block: the balance pulls the 3 kg block: \(3\times4=12\) N.
Justification
Second law for the trailing block
Calculation
8 N; 12 N
Answer
8 N; 12 N
Interpretation
The balance reads the force on whatever is behind it, so it depends on where you pull.
Alternative method
Leading block: \(20-T=3\times4\Rightarrow T=8\) N ✓.
Common trap
Reading 20 N in both cases.
Recognise it
Balance or spring between two pulled blocks.

Example 7.5

L4 Advanced
Problem
Block A (2 kg) hangs from the ceiling by a string, and block B (3 kg) hangs below A on a light spring (Figure 7.4). The string is cut. Find the accelerations of A and B just after the cut. What if instead the spring were a string?
Concepts tested
Instantaneous acceleration; continuity of spring force
Given
\(m_A=2\), \(m_B=3\) kg
To find
\(a_A\), \(a_B\) just after the cut
Diagram or graph
Figure 7.4
Sign convention
Down positive
Method
Spring force from the equilibrium before the cut; it is unchanged just after.
Detailed solution
  1. Before: spring holds B: \(kx=30\) N.
  2. After the cut, A: \(20+30=2a_A\Rightarrow a_A=25\) m/s².
  3. B: \(30-30=3a_B\Rightarrow a_B=0\).
  4. With a string between A and B instead, its tension can drop at once: both blocks fall freely together, \(a_A=a_B=g=10\) m/s², and the lower string goes slack (T = 0).
Justification
Derivation 7.5
Calculation
25 m/s²; 0
Answer
A 25 m/s² downward, B 0 (with a string: both 10 m/s²)
Interpretation
The spring keeps pulling A down until it shortens.
Why this method
Reading the spring force from the earlier equilibrium avoids any need for k.
Common trap
Giving both blocks g.
Recognise it
“Just after the string is cut”, springs present.

Example 7.6

L5 Advanced challenge
Problem
Blocks of 1 kg and 2 kg on a smooth floor are joined by a light spring of constant 200 N/m. A constant 12 N force pulls the 2 kg block away from the other. (a) At an instant when the 1 kg block accelerates at 2 m/s², find the acceleration of the 2 kg block. (b) Find the spring’s extension when the two accelerations are equal.
Concepts tested
Spring force varies; separate equations
Given
\(m_1=1\), \(m_2=2\) kg, F = 12 N, k = 200 N/m
To find
\(a_2\) in (a); x in (b)
Sign convention
Direction of F positive
Method
The spring force on the 1 kg block equals \(m_1a_1\); use the 2 kg block’s equation.
Detailed solution
  1. (a) Spring force on block 1: \(kx=1\times2=2\) N.
  2. Block 2: \(12-2=2a_2\Rightarrow a_2=5\) m/s².
  3. (b) Equal accelerations: \(a=12/3=4\) m/s²; spring force \(=m_1a=4\) N.
  4. \(x=4/200=0.02\) m = 2 cm.
Justification
Second law for each block; Hooke’s law
Calculation
5 m/s²; 2 cm
Answer
(a) 5 m/s²; (b) 2 cm
Interpretation
The extension oscillates about 2 cm; a common acceleration is only momentary unless something damps the oscillation.
Why this method
The spring force is the single unknown linking the two equations; no need to solve the oscillation.
Common trap
Assuming both blocks always share the acceleration F/(m₁ + m₂).
Recognise it
Two blocks joined by a spring, one pulled.

Exercise 7

Q7.1L1Numerical · Hooke · 1 min

A 5 N force stretches a spring by 2.5 cm. Find k.

Solution
200 N/m.
Q7.2L1Single correct · series · 1 min

Two identical springs of constant k are joined in series. The equivalent constant is

(A) 2k(B) k(C) k/2(D) k/4
Solution
(C).
Q7.3L2Numerical · balance · 1 min

Two people pull the ends of a spring balance with 50 N each, in opposite directions. What does it read?

Solution
50 N.
Q7.4L2Numerical · parallel · 2 min

Three identical springs of constant 150 N/m support a 9 kg load in parallel. Find the extension.

Solution
\(90/450=\) 0.2 m.
Q7.5L3Numerical · cut spring · 2 min

A spring of constant k is cut into four equal parts, and two of them are joined in parallel. Find the new constant.

Solution
Each piece 4k; parallel: 8k.
Q7.6L3Numerical · spring in a lift · 2 min

A 2 kg mass hangs from a spring of constant 400 N/m in a lift accelerating upward at 2 m/s². Find the extension.

Solution
\(x=2(12)/400=\) 6 cm.
Q7.7L4Multiple correct · cutting · 3 min

Two blocks of equal mass m hang from the ceiling: the upper by a spring, the lower from the upper by a string. Just after the string between them is cut,

(A) the upper block accelerates upward at g(B) the lower block falls at g(C) the upper block stays at rest(D) the spring force is 2mg
Solution
(A), (B), (D). The spring still pulls up with 2mg on the upper block: net mg upward.
Q7.8L5Numerical · two springs, one block · 4 min

A 1 kg block sits between two springs on a smooth floor: spring 1 (k₁ = 100 N/m) on its left, spring 2 (k₂ = 300 N/m) on its right, both attached to walls and both at natural length. The block is pushed 5 cm to the right and released. Find its acceleration at release and the effective spring constant.

Solution
Spring 1 stretched 5 cm pulls left 5 N; spring 2 compressed 5 cm pushes left 15 N: a = 20 m/s² to the left; both act together, so k = 400 N/m (parallel, though on opposite sides).

Chapter 8 · Connected bodies

8.1 System method and isolation method

The basic idea

When bodies move together — blocks pushed in a row, carriages in a train, masses on a string over a pulley — there are two ways to apply Newton’s law. Treat the whole group as one system: internal forces (contact forces between blocks, tensions inside the group) cancel by the third law, and the external forces give the common acceleration quickly. Or isolate one body: its FBD contains the internal forces acting on it, which you can then find. Good solutions usually use the system for the acceleration and one isolated body for each internal force.

Derivation 8.1 · Two blocks in contact pushed by a force
  1. Blocks \(m_1\) and \(m_2\) touch on a smooth floor; F pushes \(m_1\) toward \(m_2\) (Figure 8.1).
  2. System: external horizontal force F only: \(a=\dfrac{F}{m_1+m_2}\).
  3. Isolate \(m_2\): only the contact force N acts horizontally on it: \(N=m_2a=\dfrac{m_2F}{m_1+m_2}\).
  4. Check with \(m_1\): \(F-N=m_1a\Rightarrow N=F-\dfrac{m_1F}{m_1+m_2}=\dfrac{m_2F}{m_1+m_2}\) ✓.
  5. Figure 8.1 (2 kg and 3 kg, F = 20 N): a = 4 m/s², N = 12 N. Pushing the 3 kg block instead gives N = 8 N: the contact force is larger when it must accelerate the heavier block.
\[ a=\frac{F}{m_1+m_2},\qquad N=\frac{m_2}{m_1+m_2}\,F\quad(m_2\ \text{the block not pushed}). \]
m₁ = 2 kgm₂ = 3 kgF = 20 Na = F/(m₁+m₂) = 4N on m₂N on m₁

Figure 8.1 · Derivation 8.1. The pushed block presses on the other with the contact force N; by the third law the other presses back equally. N must accelerate only m₂: N = m₂F/(m₁ + m₂) = 12 N.

8.2 Bodies joined by strings

The basic idea

A string joining two blocks pulled across a floor carries just enough tension to accelerate everything behind it. So in a chain of blocks the tension grows toward the pulled end, in proportion to the mass trailing behind each string.

Derivation 8.2 · Tensions in a train of blocks
  1. Blocks \(m_1,m_2,\dots,m_n\) joined by light strings on a smooth floor, pulled by F at block n (Figure 8.2). All share \(a=F/M\), \(M=\sum m_i\).
  2. Cut string k (between blocks k and k + 1). Behind it are \(m_1,\dots,m_k\), pulled only by \(T_k\): \(T_k=(m_1+\cdots+m_k)\,a\).
  3. So \(T_k=F\,\dfrac{m_1+\cdots+m_k}{M}\): the fraction of the total mass that the string has to pull.
  4. Figure 8.2 (1, 2, 3 kg; F = 30 N): a = 5 m/s², \(T_1=5\) N, \(T_2=15\) N.
\[ T_k=\frac{m_{\text{behind}}}{M}\,F . \]
1 kg2 kg3 kgF = 30 NT₁ = 5T₂ = 15a = 30/6 = 5 m/s²

Figure 8.2 · Derivation 8.2. Each string pulls everything behind it: T₁ accelerates 1 kg (5 N), T₂ accelerates 1 + 2 = 3 kg (15 N).

8.3 The Atwood machine

The basic idea

Two masses hang from the ends of one string over a pulley. If they are equal, nothing happens. If one is heavier, it falls and lifts the other, but slowly: the small difference of weights must accelerate the sum of the masses. George Atwood used this in 1784 to “slow down” gravity and measure g.

Derivation 8.3 · Acceleration and tension in the Atwood machine
  1. Masses \(m_1>m_2\) on a light string over an ideal pulley (Figure 8.3). The string is inextensible, so \(m_1\) goes down with a and \(m_2\) up with a; one tension T throughout.
  2. \(m_1\) (down positive): \(m_1g-T=m_1a\).
  3. \(m_2\) (up positive): \(T-m_2g=m_2a\).
  4. Add: \((m_1-m_2)g=(m_1+m_2)a\Rightarrow a=\dfrac{m_1-m_2}{m_1+m_2}\,g\).
  5. Substitute: \(T=m_2(g+a)=\dfrac{2m_1m_2}{m_1+m_2}\,g\), which lies between \(m_2g\) and \(m_1g\).
  6. Clamp force: 2T (both strands vertical, Derivation 6.5), less than \((m_1+m_2)g\) while the masses accelerate.
  7. Figure 8.3 (3 kg, 2 kg): a = 2 m/s², T = 24 N, clamp 48 N < 50 N.
\[ a=\frac{m_1-m_2}{m_1+m_2}\,g,\qquad T=\frac{2m_1m_2}{m_1+m_2}\,g . \]
m₁ = 3m₂ = 2aaTT

Figure 8.3 · Derivation 8.3. One string, one tension. The heavier mass (3 kg) accelerates down and the lighter (2 kg) up, with a = (m₁ − m₂)g/(m₁ + m₂) = 2 m/s² and T = 2m₁m₂g/(m₁ + m₂) = 24 N.

8.4 A block on a table pulled by a hanging block

The basic idea

A block on a smooth table is tied by a string over a pulley at the edge to a hanging block. The weight of the hanging block is the only driving force; it must accelerate both blocks. The string tension is less than the hanging weight, otherwise the hanging block could not accelerate downward.

Derivation 8.4 · Table-and-pulley system
  1. \(m_1\) on a smooth table, \(m_2\) hanging (Figure 8.4). Same magnitude of acceleration a for both (inextensible string).
  2. \(m_1\) (toward the pulley): \(T=m_1a\).
  3. \(m_2\) (down): \(m_2g-T=m_2a\).
  4. Add: \(a=\dfrac{m_2g}{m_1+m_2}\); \(T=\dfrac{m_1m_2g}{m_1+m_2}\).
  5. Figure 8.4 (4 kg, 1 kg): a = 2 m/s², T = 8 N < 10 N.
\[ a=\frac{m_2}{m_1+m_2}\,g,\qquad T=\frac{m_1m_2}{m_1+m_2}\,g . \]
m₁ = 4 kg1 kgaaT

Figure 8.4 · Derivation 8.4. Only the hanging weight m₂g drives the system; it must accelerate both masses: a = m₂g/(m₁ + m₂) = 2 m/s², T = m₁a = 8 N.

8.5 A block on an incline pulled by a hanging block

The basic idea

On a smooth incline the block’s weight has a component \(m_1g\sin\theta\) down the slope (Chapter 10). The hanging block pulls the other way with \(m_2g\). Whichever is larger wins; the difference, along the string, accelerates both masses.

Derivation 8.5 · Incline-and-pulley system
  1. \(m_1\) on a smooth incline of angle θ, joined over a pulley at the top to \(m_2\) hanging (Figure 8.5). Take the direction “\(m_2\) down, \(m_1\) up the slope” as positive.
  2. \(m_1\) along the slope: \(T-m_1g\sin\theta=m_1a\). (Perpendicular: \(N=m_1g\cos\theta\).)
  3. \(m_2\): \(m_2g-T=m_2a\).
  4. Add: \(a=\dfrac{m_2-m_1\sin\theta}{m_1+m_2}\,g\). If this is negative, \(m_1\) slides down and \(m_2\) rises.
  5. \(T=m_2(g-a)=\dfrac{m_1m_2(1+\sin\theta)}{m_1+m_2}\,g\).
  6. Figure 8.5 (5 kg at 30°, 4 kg): \(a=(40-25)/9=1.67\) m/s², T = 33.3 N. Balance needs \(m_2=m_1\sin\theta\).
\[ a=\frac{m_2-m_1\sin\theta}{m_1+m_2}\,g,\qquad T=\frac{m_1m_2(1+\sin\theta)}{m_1+m_2}\,g . \]
5 kg4 kg30°m₁g sin θ = 25 N down the slope; m₂g = 40 N

Figure 8.5 · Derivation 8.5. Along the string the driving force is m₂g − m₁g sin θ = 40 − 25 = 15 N, shared by the 9 kg total: a = 1.67 m/s², the hanging block moving down.

Solved examples 8.1–8.7

Example 8.1

L1 Foundation
Problem
Blocks of 2 kg and 3 kg touch on a smooth floor. A 20 N horizontal force pushes the 2 kg block toward the 3 kg block. Find the acceleration and the contact force.
Concepts tested
Blocks in contact
Given
\(m_1=2\), \(m_2=3\) kg, F = 20 N
To find
a, N
Diagram or graph
Figure 8.1
Sign convention
Direction of F positive
Method
System for a; the 3 kg block alone for N.
Detailed solution
  1. \(a=20/(2+3)=4\) m/s².
  2. 3 kg block: \(N=3\times4=12\) N.
  3. Check 2 kg: \(20-12=8=2\times4\) ✓.
Justification
Derivation 8.1
Calculation
4 m/s²; 12 N
Answer
4 m/s²; 12 N
Interpretation
The contact force is less than F because part of F accelerates the first block.
Alternative method
\(N=m_2F/(m_1+m_2)\).
Common trap
Taking N = F.
Recognise it
Blocks side by side pushed together.

Example 8.2

L2 Basic application
Problem
Masses of 3 kg and 2 kg hang from a light string over an ideal fixed pulley. Find the acceleration, the tension and the force on the pulley’s clamp.
Concepts tested
Atwood machine
Given
\(m_1=3\), \(m_2=2\) kg
To find
a, T, clamp force
Diagram or graph
Figure 8.3
Sign convention
3 kg down positive
Method
Derivation 8.3.
Detailed solution
  1. \(a=\dfrac{3-2}{5}\times10=2\) m/s².
  2. \(T=m_2(g+a)=2\times12=24\) N (check: \(m_1(g-a)=3\times8=24\) ✓).
  3. Clamp: \(2T=48\) N, less than the 50 N total weight because the system’s centre of mass accelerates downward.
Justification
Derivation 8.3
Calculation
2 m/s²; 24 N; 48 N
Answer
2 m/s²; 24 N; 48 N
Interpretation
The tension lies between the two weights (20 N and 30 N).
Alternative method
\(T=2m_1m_2g/(m_1+m_2)=120/5\).
Common trap
T = 30 N or T = 20 N.
Recognise it
Two masses over one pulley.

Example 8.3

L2 Basic application
Problem
A 4 kg block on a smooth table is tied by a light string over a pulley at the edge to a hanging 1 kg block. Find the acceleration and the tension.
Concepts tested
Table-and-pulley system
Given
\(m_1=4\), \(m_2=1\) kg
To find
a, T
Diagram or graph
Figure 8.4
Sign convention
Direction of motion positive
Method
Derivation 8.4.
Detailed solution
  1. System along the string: driving force \(m_2g=10\) N, total mass 5 kg: \(a=2\) m/s².
  2. Table block: \(T=4\times2=8\) N.
  3. Check hanging block: \(10-8=2=1\times2\) ✓.
Justification
Derivation 8.4
Calculation
2 m/s²; 8 N
Answer
2 m/s²; 8 N
Interpretation
The hanging block falls at only g/5.
Alternative method
—
Common trap
Taking T = 10 N.
Recognise it
Block on a table, string over the edge.

Example 8.4

L3 JEE Main
Problem
A 5 kg block on a smooth 30° incline is tied by a string over a pulley at the top to a hanging 4 kg block. Find the acceleration, the tension and the normal force on the 5 kg block.
Concepts tested
Incline-and-pulley system
Given
\(m_1=5\) kg, θ = 30°, \(m_2=4\) kg
To find
a, T, N
Diagram or graph
Figure 8.5
Sign convention
Hanging block down positive
Method
Compare \(m_2g\) and \(m_1g\sin\theta\); then Derivation 8.5.
Detailed solution
  1. \(m_2g=40\) N; \(m_1g\sin30^\circ=25\) N: the hanging block goes down.
  2. \(a=(40-25)/9=1.667\) m/s².
  3. \(T=4(10-1.667)=33.3\) N.
  4. \(N=m_1g\cos30^\circ=50\times0.866=43.3\) N.
Justification
Derivation 8.5
Calculation
1.67 m/s²; 33.3 N; 43.3 N
Answer
1.67 m/s²; 33.3 N; 43.3 N
Interpretation
A hanging mass of 2.5 kg would just balance the system.
Alternative method
Check on the incline block: \(33.3-25=8.3=5\times1.667\) ✓.
Common trap
Using the full weight 50 N along the slope.
Recognise it
Block on a slope, string over the top.

Example 8.5

L3 JEE Main
Problem
Blocks of 1 kg, 2 kg and 3 kg are joined in that order by light strings on a smooth floor. A 30 N force pulls the 3 kg block. Find the acceleration and both tensions. What are the tensions if the force pulls the 1 kg block instead?
Concepts tested
Train of blocks
Given
Masses 1, 2, 3 kg; F = 30 N
To find
a, \(T_{12}\), \(T_{23}\)
Diagram or graph
Figure 8.2
Sign convention
Direction of F positive
Method
\(T=\) (mass behind) × a.
Detailed solution
  1. \(a=30/6=5\) m/s².
  2. Pulling the 3 kg end: \(T_{12}=1\times5=5\) N; \(T_{23}=(1+2)\times5=15\) N.
  3. Pulling the 1 kg end: behind string 1–2 are 2 + 3 = 5 kg: \(T_{12}=25\) N; behind 2–3 is 3 kg: \(T_{23}=15\) N.
Justification
Derivation 8.2
Calculation
5 m/s²; 5 N, 15 N; 25 N, 15 N
Answer
5 m/s²; 5 N and 15 N (or 25 N and 15 N if the 1 kg block is pulled)
Interpretation
The middle tension is unchanged here only because the mass on each side of it is 3 kg.
Alternative method
—
Common trap
Dividing F equally among the strings.
Recognise it
Several blocks in a line, pulled.

Example 8.6

L4 Advanced
Problem
In an Atwood machine, masses of 1.2 kg and 0.8 kg are released from rest at the same height. The heavier one hits the floor after falling 1 m. How much higher does the lighter one then rise, and what is its greatest height above its starting point?
Concepts tested
Atwood machine; string goes slack
Given
\(m_1=1.2\), \(m_2=0.8\) kg; fall 1 m
To find
Extra rise; greatest height
Sign convention
Up positive for the lighter mass
Method
Atwood acceleration up to the impact; then the string slackens and the lighter mass moves freely.
Detailed solution
  1. \(a=\dfrac{0.4}{2.0}\times10=2\) m/s².
  2. After 1 m: \(v^2=2(2)(1)\Rightarrow v=2\) m/s (both masses).
  3. The heavy mass stops; the string goes slack; the light mass is a free projectile upward at 2 m/s: extra rise \(v^2/2g=4/20=0.2\) m.
  4. Greatest height \(=1+0.2=1.2\) m above its start.
Justification
Derivation 8.3, then free fall
Calculation
a = 2 m/s²; v = 2 m/s; 0.2 m; 1.2 m
Answer
0.2 m more; 1.2 m above its start
Interpretation
Once the string is slack T = 0, so the Atwood formulas no longer apply.
Why this method
Splitting the motion at the instant the string goes slack makes each stage a standard problem.
Common trap
Assuming the lighter mass stops when the heavier one lands.
Recognise it
“Hits the floor”, “string becomes slack”.

Example 8.7

L5 Advanced challenge
Problem
An Atwood machine (3 kg and 2 kg) hangs from the ceiling of a lift that accelerates upward at 2 m/s². Find the acceleration of each mass relative to the lift and relative to the ground, and the tension.
Concepts tested
Atwood machine in an accelerating support
Given
\(m_1=3\), \(m_2=2\) kg, \(a_0=2\) m/s² up
To find
Relative and ground accelerations; T
Sign convention
Up positive (ground frame)
Method
Ground frame: \(m_1\) has acceleration \(a_0-a_r\), \(m_2\) has \(a_0+a_r\), where \(a_r\) is the relative acceleration.
Detailed solution
  1. \(m_1\): \(T-30=3(2-a_r)\).
  2. \(m_2\): \(T-20=2(2+a_r)\).
  3. Subtract the second from the first: \((T-30)-(T-20)=(6-3a_r)-(4+2a_r)\Rightarrow-10=2-5a_r\Rightarrow a_r=2.4\) m/s².
  4. \(T=20+2(4.4)=28.8\) N.
  5. Ground: \(m_1\) moves at \(2-2.4=-0.4\) m/s² (down), \(m_2\) at \(2+2.4=4.4\) m/s² (up).
  6. Shortcut: replace g by \(g+a_0=12\): \(a_r=\tfrac15(12)=2.4\), \(T=\tfrac{12}{5}(12)=28.8\) ✓.
Justification
Derivation 8.3 with \(g\to g+a_0\)
Calculation
\(a_r=2.4\) m/s²; T = 28.8 N; ground −0.4 and +4.4 m/s²
Answer
2.4 m/s² relative to the lift; −0.4 m/s² and +4.4 m/s² relative to the ground; T = 28.8 N
Interpretation
In the lift, gravity behaves as if it were 12 m/s² (Chapter 11).
Why this method
The effective-g shortcut turns the problem into the ordinary Atwood formulas.
Common trap
Adding \(a_0\) to the relative acceleration of both masses with the same sign.
Recognise it
Pulley system inside a lift or on an accelerating support.

Exercise 8

Q8.1L1Numerical · Atwood · 1 min

Masses of 5 kg and 3 kg hang over an ideal pulley. Find the acceleration.

Solution
\(2/8\times10=\) 2.5 m/s².
Q8.2L1Numerical · contact force · 1 min

A 15 N force pushes a 1 kg block against a 4 kg block on a smooth floor. Find the contact force.

Solution
a = 3 m/s²; 12 N.
Q8.3L2Numerical · table system · 2 min

A 3 kg block on a smooth table is joined over the edge to a hanging 2 kg block. Find a and T.

Solution
\(a=20/5=\) 4 m/s²; \(T=3\times4=\) 12 N.
Q8.4L2Single correct · tension · 1 min

In an Atwood machine with unequal masses, the tension is

(A) equal to the heavier weight(B) equal to the lighter weight(C) between the two weights(D) the sum of the weights
Solution
(C).
Q8.5L3Numerical · balanced incline · 2 min

A 6 kg block on a smooth 37° incline is joined over the top to a hanging mass m. Find m for equilibrium.

Solution
\(m=6\sin37^\circ=\) 3.6 kg.
Q8.6L3Numerical · two hanging masses · 2 min

A 3 kg block on a smooth table is tied on one side over a pulley to a hanging 2 kg mass and on the other side over a second pulley to a hanging 5 kg mass. Find the acceleration and both tensions.

Solution
\(a=(50-20)/10=\) 3 m/s² toward the 5 kg side; \(T_2=2(13)=\) 26 N; \(T_5=5(7)=\) 35 N.
Q8.7L4Numerical · time to meet · 3 min

Masses 3 kg and 1 kg hang over a pulley with the 3 kg mass 2 m above the 1 kg mass, both released from rest. When are they level?

Solution
a = 5 m/s², they close at relative acceleration 10 m/s²: \(2=\tfrac12(10)t^2\Rightarrow\) t = 0.632 s.
Q8.8L4Multiple correct · Atwood · 3 min

In an Atwood machine with \(m_1>m_2\), which statements are true?

(A) a < g always(B) T < m₁g(C) the clamp force is less than (m₁ + m₂)g(D) a = g if m₂ = 0
Solution
(A), (B), (C), (D). Each follows from Derivation 8.3; (A) holds for m₂ > 0, and (D) is the limit.
Q8.9L5Numerical · pushing a stack up an incline · 4 min

Blocks of 2 kg (lower) and 3 kg (upper) touch on a smooth 30° incline. A force of 60 N parallel to the incline pushes the lower block up the slope. Find the acceleration and the contact force.

Solution
\(a=(60-50\times0.5)/5=\) 7 m/s²; upper block: \(N-15=3\times7\Rightarrow N=\) 36 N (= 3/5 of 60: the gravity components cancel out of N).

Chapter 9 · Constraint relations

9.1 Why constraints are needed

The basic idea

Newton’s law gives one equation per body per direction, but connected bodies bring in extra unknowns: tensions and normal forces. The missing equations come from geometry. An inextensible string has a fixed length; a block resting on a wedge cannot sink into it. Writing such a condition and differentiating it twice gives a constraint relation between accelerations. In Chapter 8 the constraint was simply “same a”; with movable pulleys and wedges it is not.

9.2 String constraints

The basic idea

Measure the position of every moving body from a fixed point, write the total length of the string in terms of those positions, and set it constant. Differentiating once relates velocities; twice, accelerations. A string segment between a moving pulley and a fixed point counts once for each strand.

Derivation 9.1 · Movable pulley: \(a_B=-2a_A\)
  1. Positions measured downward from the ceiling: \(x_A\) for the movable pulley (and A), \(x_B\) for B (Figure 9.1).
  2. String length: strand from ceiling to the movable pulley \(\approx x_A\), strand from the movable pulley up to the fixed pulley \(\approx x_A\), strand from the fixed pulley down to B \(\approx x_B\), plus constant pieces round the pulleys: \(L=2x_A+x_B+c\).
  3. Inextensible: \(2\dot x_A+\dot x_B=0\Rightarrow v_B=-2v_A\); again: \(a_B=-2a_A\).
  4. If A goes down 1 cm, B goes up 2 cm. The movable pulley trades distance for force: it is held by 2T.
\[ 2x_A+x_B=\text{const}\ \Rightarrow\ v_B=-2v_A,\qquad a_B=-2a_A . \]
ABxAxB2xA + xB = constaB = −2aA

Figure 9.1 · Derivation 9.1. The string runs from the ceiling down round the movable pulley carrying A, up over the fixed pulley and down to B. Its length is \(2x_A+x_B\) + constant, so if A drops by 1 cm, B must rise by 2 cm.

Derivation 9.2 · Dynamics of the movable-pulley system
  1. Masses \(m_1\) on the light movable pulley and \(m_2\) on the free end (Figure 9.2). Take \(a_1\) upward for \(m_1\) and \(a_2\) downward for \(m_2\); the constraint becomes \(a_2=2a_1\).
  2. \(m_1\) with its pulley: string pulls up on both sides: \(2T-m_1g=m_1a_1\).
  3. \(m_2\): \(m_2g-T=m_2a_2=2m_2a_1\).
  4. From the second, \(T=m_2g-2m_2a_1\). Substitute: \(2m_2g-4m_2a_1-m_1g=m_1a_1\).
  5. \(a_1=\dfrac{(2m_2-m_1)g}{m_1+4m_2}\), \(a_2=2a_1\), \(T=\dfrac{3m_1m_2g}{m_1+4m_2}\).
  6. Balance when \(m_1=2m_2\). Figure 9.2 (\(m_1=4\), \(m_2=1\) kg): \(a_1=-2.5\) m/s² (\(m_1\) goes down), \(m_2\) goes up at 5 m/s², T = 15 N.
\[ a_1=\frac{2m_2-m_1}{m_1+4m_2}\,g,\qquad a_2=2a_1,\qquad T=\frac{3m_1m_2}{m_1+4m_2}\,g . \]
m₁ = 4m₂ = 1TTpulley + m₁: 2T − m₁g = m₁a₁m₂: m₂g − T = m₂a₂a₁ up, a₂ down: a₂ = 2a₁

Figure 9.2 · Derivation 9.2. The movable pulley is pulled up by the string on both sides (2T), while B feels T once. With a₁ measured upward, a₂ downward and the constraint a₂ = 2a₁, the three equations give both accelerations and the tension.

9.3 Strings at an angle

The basic idea

When a string pulls a body at an angle, the body’s velocity is not the speed at which the string is reeled in. Only the part of the velocity along the string lengthens or shortens it; the part across the string just swings it round. So the rope’s speed is the body’s velocity component along the rope.

Derivation 9.3 · Block on a floor pulled through a raised pulley
  1. A block moves along the floor with velocity v; the string from it to a pulley at height h makes angle θ with the floor (Figure 9.3).
  2. Length of that segment: \(\ell=\sqrt{x^2+h^2}\), with x the horizontal distance to the pulley.
  3. \(\dfrac{d\ell}{dt}=\dfrac{x}{\sqrt{x^2+h^2}}\dfrac{dx}{dt}=\cos\theta\,\dfrac{dx}{dt}\).
  4. The string is pulled in at rate u: \(u=v\cos\theta\Rightarrow v=\dfrac{u}{\cos\theta}\). The block moves faster than the rope, and ever faster as it approaches the pulley (θ → 90°).
  5. General rule: for each body tied to a string, the rate at which the string’s length changes is the component of its velocity along the string. Summing these with the right signs and setting the total to zero gives every string constraint.
\[ u=v\cos\theta,\qquad v=\frac{u}{\cos\theta} . \]
blockpulled in at uvθu = v cos θ

Figure 9.3 · Derivation 9.3. The string’s length between block and pulley shortens at the rate u at which it is pulled in. Only the component of the block’s velocity along the string shortens it: u = v cos θ, so v = u/cos θ > u.

9.4 Contact (wedge) constraints

The basic idea

Two smooth surfaces in contact may slide over each other but cannot move into each other or apart (while they stay in contact). So along the common normal at the contact point the two bodies have equal velocity components. Along the surface they may differ.

Derivation 9.4 · Rod resting on a moving wedge
  1. A rod held vertical by guides rests on the sloping face (angle θ) of a wedge that moves horizontally with speed V (Figure 9.4).
  2. Surface height under the rod at horizontal position x on the wedge: \(y=(\text{const}-x)\tan\theta\). If the wedge moves left by Δx, the point under the rod is Δx further down the slope: the rod drops by \(\Delta x\tan\theta\).
  3. So \(v_{\text{rod}}=V\tan\theta\) and \(a_{\text{rod}}=A\tan\theta\).
  4. Normal-component check: the normal to the face makes angle θ with the vertical. Rod: \(v_{\text{rod}}\cos\theta\); wedge: \(V\sin\theta\). Equal: \(v_{\text{rod}}=V\tan\theta\) ✓.
\[ v_{\text{rod}}\cos\theta=V\sin\theta\ \Rightarrow\ v_{\text{rod}}=V\tan\theta,\qquad a_{\text{rod}}=A\tan\theta . \]
guidesθVv = V tan θN

Figure 9.4 · Derivation 9.4. A rod held vertical by guides rests on a wedge of angle θ. As the wedge moves left by Δx, the surface under the rod drops by Δx tan θ, so the rod’s speed is V tan θ. Along the common normal N the two bodies must move equally fast.

Solved examples 9.1–9.5

Example 9.1

L2 Basic application
Problem
In the arrangement of Figure 9.1, block A moves down with velocity 2 m/s and acceleration 0.5 m/s². Find the velocity and acceleration of B.
Concepts tested
String constraint with a movable pulley
Given
\(v_A=2\) m/s, \(a_A=0.5\) m/s² (down)
To find
\(v_B\), \(a_B\)
Diagram or graph
Figure 9.1
Sign convention
Down positive
Method
\(2x_A+x_B=\) const.
Detailed solution
  1. \(v_B=-2v_A=-4\) m/s: 4 m/s upward.
  2. \(a_B=-2a_A=-1\) m/s²: 1 m/s² upward.
Justification
Derivation 9.1
Calculation
−4 m/s; −1 m/s²
Answer
B moves up at 4 m/s with acceleration 1 m/s² upward
Interpretation
The free end moves twice as fast as the movable pulley.
Alternative method
Count strands: two strands support A, so B’s end moves 2 × A’s displacement.
Common trap
Taking \(v_B=v_A\).
Recognise it
A pulley that moves with a load.

Example 9.2

L3 JEE Main
Problem
In Figure 9.2, \(m_1=4\) kg hangs from the movable pulley and \(m_2=1\) kg from the free end. Find the accelerations and the tension.
Concepts tested
Constraint + Newton’s laws
Given
\(m_1=4\), \(m_2=1\) kg
To find
\(a_1\), \(a_2\), T
Diagram or graph
Figure 9.2
Sign convention
\(a_1\) up, \(a_2\) down
Method
Three equations: two Newton, one constraint.
Detailed solution
  1. \(2T-40=4a_1\); \(10-T=1\cdot a_2\); \(a_2=2a_1\).
  2. \(T=10-2a_1\Rightarrow20-4a_1-40=4a_1\Rightarrow a_1=-2.5\) m/s².
  3. \(a_2=-5\) m/s²: \(m_2\) accelerates upward at 5 m/s²; \(m_1\) downward at 2.5 m/s².
  4. \(T=10-2(-2.5)=15\) N. Check \(m_1\): \(30-40=-10=4(-2.5)\) ✓.
Justification
Derivation 9.2
Calculation
\(a_1=-2.5\), \(a_2=-5\) m/s²; T = 15 N
Answer
\(m_1\) down at 2.5 m/s², \(m_2\) up at 5 m/s²; T = 15 N
Interpretation
\(m_1=4\) kg exceeds \(2m_2=2\) kg, so \(m_1\) wins.
Alternative method
Formula \(a_1=(2-4)10/(4+4)\).
Common trap
Using the Atwood formula with the same acceleration for both.
Recognise it
Movable pulley with masses.

Example 9.3

L3 JEE Main
Problem
A block on a smooth floor is pulled by a string that passes over a pulley fixed above the floor. The string is reeled in at 2 m/s. Find the block’s speed when the string makes 37° with the floor, and its speed when the angle is 60°.
Concepts tested
String at an angle
Given
u = 2 m/s; θ = 37°, 60°
To find
v
Diagram or graph
Figure 9.3
Sign convention
—
Method
\(v=u/\cos\theta\).
Detailed solution
  1. θ = 37°: \(v=2/0.8=2.5\) m/s.
  2. θ = 60°: \(v=2/0.5=4\) m/s.
Justification
Derivation 9.3
Calculation
2.5 m/s; 4 m/s
Answer
2.5 m/s at 37°; 4 m/s at 60°
Interpretation
Reeling in steadily still makes the block speed up as it approaches.
Alternative method
Differentiate \(\ell=\sqrt{x^2+h^2}\).
Common trap
\(v=u\cos\theta\).
Recognise it
Boat pulled to a jetty, block pulled by an overhead rope.

Example 9.4

L4 Advanced
Problem
A vertical rod held by guides rests on a smooth wedge of angle 37° (Figure 9.4). The wedge is pushed so that it moves away from the rod side at 4 m/s and accelerates at 2 m/s². Find the velocity and acceleration of the rod.
Concepts tested
Wedge constraint
Given
V = 4 m/s, A = 2 m/s², θ = 37°
To find
\(v_{\text{rod}}\), \(a_{\text{rod}}\)
Diagram or graph
Figure 9.4
Sign convention
Rod down positive
Method
\(v=V\tan\theta\), \(a=A\tan\theta\).
Detailed solution
  1. \(\tan37^\circ=0.75\).
  2. \(v_{\text{rod}}=4\times0.75=3\) m/s downward.
  3. \(a_{\text{rod}}=2\times0.75=1.5\) m/s² downward.
Justification
Derivation 9.4
Calculation
3 m/s; 1.5 m/s²
Answer
3 m/s and 1.5 m/s², downward
Interpretation
A steeper wedge moves the rod faster for the same wedge speed.
Why this method
Equating normal components gives the result without coordinates.
Common trap
Using sin or cos instead of tan.
Recognise it
Rod or block constrained to move vertically on a wedge.

Example 9.5

L5 Advanced challenge
Problem
The rod of Example 9.4 has mass 2 kg; the wedge (θ = 37°) has mass 3 kg and rests on a smooth floor. Released from rest, the rod pushes the wedge sideways. Find the accelerations of rod and wedge and the normal force between them.
Concepts tested
Constraint plus Newton’s laws for two bodies
Given
m = 2 kg, M = 3 kg, θ = 37°
To find
\(a_{\text{rod}}\), A, N
Sign convention
Rod down, wedge away from the rod, positive
Method
Rod (vertical): \(mg-N\cos\theta=ma_{\text{rod}}\). Wedge (horizontal): \(N\sin\theta=MA\). Constraint \(a_{\text{rod}}=A\tan\theta\).
Detailed solution
  1. Wedge: \(N=MA/\sin\theta=3A/0.6=5A\).
  2. Rod: \(20-5A(0.8)=2(0.75A)\Rightarrow20-4A=1.5A\).
  3. \(A=20/5.5=3.64\) m/s².
  4. \(a_{\text{rod}}=0.75\times3.64=2.73\) m/s²; \(N=5\times3.64=18.2\) N.
  5. General: \(A=\dfrac{mg}{M\cot\theta+m\tan\theta}\).
Justification
Derivation 9.4 with the second law
Calculation
A = 3.64 m/s²; \(a_{\text{rod}}=2.73\) m/s²; N = 18.2 N
Answer
Wedge 3.64 m/s², rod 2.73 m/s² downward, N = 18.2 N
Interpretation
N is less than the rod’s 20 N weight times sec θ: the supporting surface is itself moving away.
Why this method
The constraint reduces two unknown accelerations to one.
Common trap
Taking N = mg/cos θ = 25 N, the value if the wedge were held fixed.
Recognise it
Two bodies in sliding contact, both free to move.

Exercise 9

Q9.1L1Single correct · constraint · 1 min

In Figure 9.1, if A moves up 3 cm, B moves

(A) 3 cm down(B) 6 cm down(C) 1.5 cm down(D) 6 cm up
Solution
(B).
Q9.2L2Numerical · reeled string · 1 min

A boat is pulled to a jetty by a rope reeled in at 1.5 m/s. Find the boat’s speed when the rope makes 60° with the water.

Solution
\(1.5/\cos60^\circ=\) 3 m/s.
Q9.3L2Numerical · wedge · 1 min

A rod resting on a 45° wedge rises at 2 m/s. How fast does the wedge move?

Solution
2 m/s (tan 45° = 1).
Q9.4L3Numerical · movable pulley balance · 2 min

In Figure 9.2 with \(m_2=3\) kg, what \(m_1\) keeps the system at rest, and what is T?

Solution
\(m_1=2m_2=\) 6 kg; T = 30 N.
Q9.5L3Numerical · movable pulley · 2 min

In Figure 9.2, \(m_1=1\) kg and \(m_2=1\) kg. Find the acceleration of each.

Solution
\(a_1=(2-1)10/(1+4)=\) 2 m/s² up; \(m_2\) 4 m/s² down.
Q9.6L4Numerical · three strands · 3 min

A load hangs from a movable pulley block supported by three strands of one string, whose free end is pulled down. If the free end moves down 30 cm, how far does the load rise? If the pull is 100 N (light pulleys, steady motion), what load is lifted?

Solution
\(3x_L+x_{\text{end}}=\) const: rises 10 cm; load = 3T = 300 N.
Q9.7L5Numerical · block on a free wedge · 4 min

A 1 kg rod constrained to move vertically rests on a smooth 45° wedge of mass 1 kg on a smooth floor. Find the accelerations of both and the normal force.

Solution
\(A=mg/(M\cot45^\circ+m\tan45^\circ)=10/2=\) 5 m/s²; rod 5 m/s²; \(N=MA/\sin45^\circ=\) 7.07 N.

Chapter 10 · Inclined planes and wedges

10.1 A block on a smooth incline

The basic idea

On a slope, gravity still pulls straight down, but the block can only move along the surface. Split the weight into a part along the slope, which accelerates the block, and a part into the slope, which the surface balances with the normal force. Choosing axes along and perpendicular to the incline makes each equation contain one unknown.

Derivation 10.1 · Acceleration and normal force on a smooth incline
  1. Block of mass m on a smooth incline of angle θ (Figure 10.1). Forces: mg vertically down, N perpendicular to the surface.
  2. The angle between mg and the inward normal equals θ (both directions are turned by θ from the vertical and from the surface respectively).
  3. Components of mg: \(mg\sin\theta\) down the slope, \(mg\cos\theta\) into the slope.
  4. Perpendicular (no motion): \(N-mg\cos\theta=0\Rightarrow N=mg\cos\theta\).
  5. Along the slope: \(mg\sin\theta=ma\Rightarrow a=g\sin\theta\), independent of mass.
  6. Limits: θ = 0 gives a = 0, N = mg; θ = 90° gives free fall, N = 0.
\[ a=g\sin\theta\ (\text{down the slope}),\qquad N=mg\cos\theta . \]
mgmg sin θmg cos θN = mg cos θθθ

Figure 10.1 · Derivation 10.1 (θ = 30°). Resolve mg along and perpendicular to the slope. The perpendicular part is balanced by N; the part mg sin θ along the slope is unbalanced and gives a = g sin θ.

10.2 Time and speed on an incline

The basic idea

A gentler slope gives a smaller acceleration and a longer path, so the trip takes longer. But the final speed depends only on the height descended: the smaller acceleration acts over a proportionally longer distance. This is the first hint of energy conservation.

Derivation 10.2 · Sliding from rest down a smooth incline
  1. Length L, height \(h=L\sin\theta\), acceleration \(g\sin\theta\), start from rest.
  2. \(L=\tfrac12g\sin\theta\,t^2\Rightarrow t=\sqrt{\dfrac{2L}{g\sin\theta}}=\dfrac1{\sin\theta}\sqrt{\dfrac{2h}{g}}\).
  3. \(v^2=2(g\sin\theta)L=2gh\Rightarrow v=\sqrt{2gh}\), the same for every angle.
  4. Figure 10.2 (h = 5 m): 30° takes 2 s, a vertical drop 1 s; both arrive at 10 m/s.
  5. Projected up the slope at u: deceleration \(g\sin\theta\), distance \(u^2/(2g\sin\theta)\), time up \(u/(g\sin\theta)\), equal to the time back down.
\[ t=\sqrt{\frac{2L}{g\sin\theta}},\qquad v=\sqrt{2gh} . \]
0123456153045607590θ (degrees)time from height h = 5 m (s)30°: 2 svertical drop: 1 st = (1/sin θ)√(2h/g)final speed √(2gh) = 10 m/s for every θ

Figure 10.2 · Derivation 10.2 for a height of 5 m. Gentler slopes take longer, but every smooth incline of the same height delivers the same final speed √(2gh).

10.3 Chords of a vertical circle

The basic idea

A surprising consequence of \(a=g\sin\theta\): smooth straight wires from the top of a vertical circle to any point on it are all descended in the same time. Steeper chords are longer, shallower chords are shorter, and the two effects cancel exactly.

Derivation 10.3 · Equal-time chords
  1. Circle of radius R; chord from the top A at angle α to the vertical diameter (Figure 10.3).
  2. The angle in a semicircle is 90°, so the chord is \(2R\cos\alpha\).
  3. A bead on the smooth chord has acceleration \(g\cos\alpha\) (the chord makes angle 90° − α with the horizontal).
  4. \(2R\cos\alpha=\tfrac12g\cos\alpha\,t^2\Rightarrow t=\sqrt{4R/g}\), independent of α.
  5. That is the time to fall freely down the diameter 2R.
\[ t=\sqrt{\frac{4R}{g}}\quad\text{for every chord from the top}. \]
Adiameter: 2R = ½gt²same t = √(4R/g) along every chord

Figure 10.3 · Derivation 10.3. A chord from the top of a vertical circle at angle α to the vertical has length 2R cos α, and a bead slides down it with acceleration g cos α. Both carry the same factor, so every chord takes the free-fall time of the diameter.

10.4 Pushing or holding a block on an incline

The basic idea

A force applied to a block on a slope is resolved along the same two axes. A force along the slope affects only the motion; a horizontal force both drives the block along the slope and presses it into the surface, increasing the normal force.

Derivation 10.4 · Horizontal force on a block on a smooth incline
  1. Horizontal force F toward the slope on a block of mass m (Figure 10.4).
  2. F makes angle θ with the slope direction: component \(F\cos\theta\) up the slope and \(F\sin\theta\) into the surface.
  3. Along the slope (up positive): \(F\cos\theta-mg\sin\theta=ma\).
  4. Perpendicular: \(N=mg\cos\theta+F\sin\theta\).
  5. At rest (a = 0): \(F=mg\tan\theta\) and then \(N=mg\cos\theta+mg\sin\theta\tan\theta=mg/\cos\theta\).
  6. Compare a force along the slope: \(F=mg\sin\theta\) holds the block, with N = mg cos θ. The horizontal push must be larger because part of it is wasted pressing into the surface.
\[ F\cos\theta-mg\sin\theta=ma,\qquad N=mg\cos\theta+F\sin\theta;\qquad F_{\text{hold}}=mg\tan\theta . \]
FmgNθalong: F cos θ − mg sin θ = maacross: N = mg cos θ + F sin θ

Figure 10.4 · Derivation 10.4. A horizontal push F has a component F cos θ up the slope and F sin θ into it. It holds the block at rest when F = mg tan θ.

10.5 A block on a movable wedge

The basic idea

If the wedge itself can slide on a smooth floor, the block’s push on it (the reaction to N) drives it backward. The block then slides down a surface that is moving away from it, so the normal force is smaller than mg cos θ. Write Newton’s law for both bodies in the ground frame and link them with the contact constraint: the block stays on the face of the wedge.

Derivation 10.5 · Accelerations and normal force for a block on a free wedge
  1. Wedge of mass M, face angle θ, on a smooth floor; block m on the smooth face (Figure 10.5). Wedge acceleration A (backward); block acceleration relative to the wedge \(a_r\) down the face.
  2. Block’s ground acceleration: horizontal \(a_r\cos\theta-A\), vertical \(-a_r\sin\theta\). Normal force on the block: \(N\sin\theta\) forward, \(N\cos\theta\) up.
  3. Block: \(m(a_r\cos\theta-A)=N\sin\theta\) and \(-ma_r\sin\theta=N\cos\theta-mg\).
  4. Wedge (horizontal): \(N\sin\theta=MA\).
  5. Eliminating \(a_r\) and A: \(N\left[\cos\theta+\dfrac{(M+m)\sin^2\theta}{M\cos\theta}\right]=mg\Rightarrow N=\dfrac{Mmg\cos\theta}{M+m\sin^2\theta}\).
  6. Then \(A=\dfrac{mg\sin\theta\cos\theta}{M+m\sin^2\theta}\) and \(a_r=\dfrac{(M+m)g\sin\theta}{M+m\sin^2\theta}\).
  7. Checks: M → ∞ gives A = 0, \(a_r=g\sin\theta\), N = mg cos θ (fixed incline). Horizontal momentum: \(m(a_r\cos\theta-A)-MA=0\) ✓.
\[ A=\frac{mg\sin\theta\cos\theta}{M+m\sin^2\theta},\qquad a_r=\frac{(M+m)g\sin\theta}{M+m\sin^2\theta},\qquad N=\frac{Mmg\cos\theta}{M+m\sin^2\theta} . \]
MmAarelθwedge recoils left as the block slides right

Figure 10.5 · Derivation 10.5. On a free wedge the block’s normal force pushes the wedge back, so the wedge accelerates at A while the block slides at a_rel relative to it. Horizontal momentum of the pair stays zero.

Solved examples 10.1–10.6

Example 10.1

L1 Foundation
Problem
A 2 kg block slides on a smooth 30° incline. Find its acceleration and the normal force.
Concepts tested
Smooth incline
Given
m = 2 kg, θ = 30°
To find
a, N
Diagram or graph
Figure 10.1
Sign convention
Down the slope positive
Method
\(a=g\sin\theta\), \(N=mg\cos\theta\).
Detailed solution
  1. \(a=10\times0.5=5\) m/s².
  2. \(N=20\times0.866=17.3\) N.
Justification
Derivation 10.1
Calculation
5 m/s²; 17.3 N
Answer
5 m/s² down the slope; 17.3 N
Interpretation
The surface supports only the perpendicular part of the weight.
Alternative method
—
Common trap
N = mg = 20 N.
Recognise it
Block on a smooth slope.

Example 10.2

L2 Basic application
Problem
A block is released from rest at the top of a smooth incline 10 m long at 30°. Find the time to reach the bottom and its speed there.
Concepts tested
Kinematics on an incline
Given
L = 10 m, θ = 30°
To find
t, v
Diagram or graph
Figure 10.2
Sign convention
Down the slope positive
Method
a = g sin θ, then constant-acceleration equations.
Detailed solution
  1. a = 5 m/s².
  2. \(10=\tfrac12(5)t^2\Rightarrow t=2\) s.
  3. \(v=5\times2=10\) m/s; check \(\sqrt{2gh}=\sqrt{2\times10\times5}=10\) m/s ✓ (h = 5 m).
Justification
Derivation 10.2
Calculation
2 s; 10 m/s
Answer
2 s; 10 m/s
Interpretation
Dropped vertically from 5 m it would arrive at the same 10 m/s in 1 s.
Alternative method
\(v=\sqrt{2gh}\) directly.
Common trap
Using g instead of g sin θ.
Recognise it
“Released from the top of a smooth incline”.

Example 10.3

L3 JEE Main
Problem
Smooth wires run from the top of a vertical ring of radius 5 m to three points on the ring, at 0°, 30° and 60° to the vertical diameter. Beads are released together from the top. When does each reach the ring?
Concepts tested
Equal-time chords
Given
R = 5 m; α = 0°, 30°, 60°
To find
t for each
Diagram or graph
Figure 10.3
Sign convention
—
Method
\(t=\sqrt{4R/g}\) for every chord.
Detailed solution
  1. \(t=\sqrt{4\times5/10}=\sqrt2=1.414\) s.
  2. Check α = 60°: length \(2R\cos60^\circ=5\) m, acceleration \(g\cos60^\circ=5\) m/s²: \(5=\tfrac12(5)t^2\Rightarrow t=\sqrt2\) ✓.
Justification
Derivation 10.3
Calculation
1.414 s for all three
Answer
All at the same time, 1.41 s
Interpretation
The beads lie on a growing circle through the top at every instant.
Alternative method
—
Common trap
Expecting the vertical bead to arrive first.
Recognise it
Chords of a vertical circle from its highest point.

Example 10.4

L3 JEE Main
Problem
A 4 kg block rests on a smooth 37° incline, held by a horizontal force. Find the force and the normal force. Compare with the force needed if it pushed along the incline.
Concepts tested
Horizontal force on an incline
Given
m = 4 kg, θ = 37°
To find
F, N; \(F_\parallel\)
Diagram or graph
Figure 10.4
Sign convention
Up the slope positive
Method
Along the slope: \(F\cos\theta=mg\sin\theta\); perpendicular gives N.
Detailed solution
  1. \(F=mg\tan37^\circ=40\times0.75=30\) N.
  2. \(N=mg\cos\theta+F\sin\theta=32+18=50\) N (= mg/cos θ).
  3. Along the incline: \(F_\parallel=mg\sin\theta=24\) N, with N = 32 N.
Justification
Derivation 10.4
Calculation
30 N; 50 N; 24 N
Answer
30 N horizontal (N = 50 N); 24 N if applied along the slope
Interpretation
The horizontal push presses 18 N into the surface uselessly.
Alternative method
Lami’s theorem on the three forces mg, N, F.
Common trap
F = mg sin θ for a horizontal push.
Recognise it
“Horizontal force holds the block on the incline”.

Example 10.5

L4 Advanced
Problem
A block is projected up a smooth 30° incline at 10 m/s. How far up does it go, when does it return to the start, and with what velocity?
Concepts tested
Motion up and down a smooth incline
Given
u = 10 m/s, θ = 30°
To find
Distance up, total time, return velocity
Sign convention
Up the slope positive
Method
a = −g sin θ throughout, both up and down.
Detailed solution
  1. a = −5 m/s².
  2. Distance up: \(u^2/(2\times5)=100/10=10\) m.
  3. Time up \(10/5=2\) s; by symmetry 2 s down; total 4 s (check: \(0=10t-2.5t^2\Rightarrow t=4\) s).
  4. Return velocity \(10-5\times4=-10\) m/s: 10 m/s down the slope.
Justification
Derivation 10.2
Calculation
10 m; 4 s; −10 m/s
Answer
10 m up the slope; back after 4 s at 10 m/s
Interpretation
On a smooth incline the motion is vertical-throw motion with g replaced by g sin θ.
Why this method
One equation \(s=ut+\tfrac12at^2\) with a single constant a covers the whole round trip.
Common trap
Changing the sign of a at the top.
Recognise it
“Projected up a smooth incline”.

Example 10.6

L5 Advanced challenge
Problem
A 1 kg block slides down the smooth 37° face of a 4 kg wedge that rests on a smooth floor. Find the wedge’s acceleration, the block’s acceleration relative to the wedge and the normal force.
Concepts tested
Movable wedge
Given
m = 1 kg, M = 4 kg, θ = 37° (sin 0.6, cos 0.8)
To find
A, \(a_r\), N
Diagram or graph
Figure 10.5
Sign convention
As in Derivation 10.5
Method
Apply the three results of Derivation 10.5.
Detailed solution
  1. Denominator \(M+m\sin^2\theta=4+0.36=4.36\).
  2. \(A=\dfrac{1\times10\times0.6\times0.8}{4.36}=\dfrac{4.8}{4.36}=1.10\) m/s².
  3. \(a_r=\dfrac{5\times10\times0.6}{4.36}=6.88\) m/s².
  4. \(N=\dfrac{4\times1\times10\times0.8}{4.36}=7.34\) N.
  5. Check wedge: \(N\sin\theta=4.40=MA=4\times1.10\) ✓; horizontal momentum: \(1(6.88\times0.8-1.10)=4.40=4\times1.10\) ✓.
Justification
Derivation 10.5
Calculation
1.10 m/s²; 6.88 m/s²; 7.34 N
Answer
A = 1.10 m/s²; \(a_r=6.88\) m/s²; N = 7.34 N
Interpretation
On a fixed wedge N would be 8 N and \(a_r=6\) m/s²; the recoiling wedge lowers N and raises \(a_r\).
Why this method
The closed forms save solving three simultaneous equations each time; the momentum check catches sign errors.
Common trap
Using N = mg cos θ with a moving wedge.
Recognise it
“Wedge free to move on a smooth floor”.

Exercise 10

Q10.1L1Numerical · incline · 1 min

Find the acceleration of a block on a smooth 53° incline.

Solution
\(10\times0.8=\) 8 m/s².
Q10.2L1Single correct · normal force · 1 min

On a smooth incline of angle θ the normal force on a block of mass m is

(A) mg(B) mg sin θ(C) mg cos θ(D) mg tan θ
Solution
(C).
Q10.3L2Numerical · speed at the bottom · 1 min

A block slides from rest down a smooth incline from a height of 3.2 m. Find its speed at the bottom.

Solution
\(\sqrt{2\times10\times3.2}=\) 8 m/s.
Q10.4L2Numerical · force along incline · 2 min

What force along a smooth 30° incline moves a 10 kg block up it with acceleration 2 m/s²?

Solution
\(F=50+20=\) 70 N.
Q10.5L3Numerical · ratio of times · 2 min

Two smooth inclines of the same height are at 30° and 60°. Find the ratio of the times to slide down from rest.

Solution
\(t\propto1/\sin\theta\): \(t_{30}/t_{60}=\sin60^\circ/\sin30^\circ=\) √3 ≈ 1.73.
Q10.6L3Assertion–reason · chords · 2 min

Assertion: A bead takes the same time to slide down every smooth chord from the top of a vertical circle. Reason: The final speed is the same along every chord.

(A) Both true, R explains A(B) Both true, R does not explain A(C) A true, R false(D) A false, R true
Solution
(C). Speeds differ (the chords end at different heights); the time is equal because length and acceleration both scale with cos α.
Q10.7L4Numerical · horizontal push · 3 min

A horizontal force of 50 N acts on a 5 kg block on a smooth 37° incline, pushing it toward the slope. Find the acceleration and the normal force.

Solution
Along: \(50(0.8)-50(0.6)=10=5a\Rightarrow a=\) 2 m/s² up; \(N=40+30=\) 70 N.
Q10.8L5Numerical · free wedge · 4 min

A 2 kg block slides down the smooth 45° face of a 2 kg wedge on a smooth floor. Find the acceleration of the wedge.

Solution
\(A=\dfrac{2(10)(0.5)}{2+2(0.5)}=\dfrac{10}{3}=\) 3.33 m/s².

Chapter 11 · Non-inertial frames and pseudo forces

11.1 Pseudo forces

The basic idea

Newton’s laws hold in inertial frames (Chapter 2). But it is often easier to describe motion from an accelerating frame: a passenger in a braking bus, a pendulum in an accelerating car, a block on a moving wedge. In such a frame bodies seem to accelerate with no force on them. The fix is to add, for every body, a fictitious pseudo force equal to −mA, where A is the frame’s acceleration. It has no source and no third-law partner; it is bookkeeping that makes \(\vec F=m\vec a\) work again.

Derivation 11.1 · Newton’s second law in an accelerating frame
  1. Inertial frame S: \(\vec F=m\vec a\), where \(\vec F\) is the sum of real forces.
  2. Frame S′ with acceleration \(\vec A\) (not rotating): \(\vec a\,’=\vec a-\vec A\) (Derivation 2.2).
  3. Multiply by m: \(m\vec a\,’=m\vec a-m\vec A=\vec F+(-m\vec A)\).
  4. So in S′ Newton’s law holds if the real forces are supplemented by \(\vec F_{\text{pseudo}}=-m\vec A\), applied at the body’s centre of mass.
  5. Figure 11.1: a ball on the smooth floor of a truck accelerating at 3 m/s². Ground frame: no horizontal force, a = 0. Truck frame: pseudo force 3m backward, \(a’=-3\) m/s². Both descriptions agree.
  6. Use real forces only in an inertial frame; add pseudo forces only in a non-inertial one — never both “a” and “−mA” for the same frame.
\[ m\vec a\,’=\vec F_{\text{real}}-m\vec A . \]
truck: A = 3 m/s²−mAtruck frame: a′ = −Aground frame: a = 0

Figure 11.1 · Derivation 11.1. No real horizontal force acts on the ball, so in the ground frame it stays at rest. In the truck’s frame it accelerates backward at A; Newton’s law works there only if we add the pseudo force −mA.

11.2 A pendulum in an accelerating car

The basic idea

When a car accelerates, a toy hanging from the mirror swings back and then hangs at an angle. In the car’s frame the toy is at rest, so the real forces (tension and weight) plus the pseudo force must balance. The angle measures the car’s acceleration: the pendulum is an accelerometer.

Derivation 11.2 · Angle and tension of a pendulum in a car accelerating at a
  1. Car frame: bob at rest. Forces: T along the string, mg down, pseudo force ma backward (Figure 11.2).
  2. Horizontal: \(T\sin\theta=ma\). Vertical: \(T\cos\theta=mg\).
  3. Divide: \(\tan\theta=a/g\). Square and add: \(T=m\sqrt{g^2+a^2}\).
  4. Ground-frame check: the bob accelerates with the car, \(T\sin\theta=ma\), \(T\cos\theta-mg=0\): the same equations, without any pseudo force.
  5. a = 7.5 m/s²: \(\tan\theta=0.75\), θ = 36.9°, \(T=12.5m\).
\[ \tan\theta=\frac ag,\qquad T=m\sqrt{g^2+a^2} . \]
θmgma (pseudo)Ta = 7.5 m/s²tan θ = a/g

Figure 11.2 · Derivation 11.2. In the car’s frame the bob is at rest under T, mg and the pseudo force ma backward. The string hangs along the effective gravity, tilted back by θ = tan⁻¹(a/g) = 36.9° for a = 7.5 m/s².

11.3 A block at rest on an accelerating wedge

The basic idea

A block on a smooth incline slides down. Push the wedge horizontally, toward the side its face looks to, with just the right acceleration and the block stays put on the face: the surface pushes it along with the wedge. In the wedge’s frame the pseudo force balances the slope component of gravity.

Derivation 11.3 · Acceleration needed to keep the block at rest
  1. Wedge frame (acceleration a, horizontal): block at rest under N, mg and pseudo force ma (Figure 11.3).
  2. Along the face: the pseudo force has component \(ma\cos\theta\) up the slope; gravity \(mg\sin\theta\) down. Balance: \(a=g\tan\theta\).
  3. Perpendicular: \(N=mg\cos\theta+ma\sin\theta=\dfrac{mg}{\cos\theta}\).
  4. Ground check: the block accelerates at a horizontally; \(N\sin\theta=ma\), \(N\cos\theta=mg\Rightarrow a=g\tan\theta\) ✓.
  5. If a > g tan θ, the block slides up the face; if a < g tan θ, it slides down, with relative acceleration \(g\sin\theta-a\cos\theta\) down the slope.
\[ a=g\tan\theta,\qquad N=\frac{mg}{\cos\theta};\qquad a_{\text{rel}}=g\sin\theta-a\cos\theta\ (\text{down the face}). \]
mpusha = g tan θθwedge frame: N, mgand ma balance

Figure 11.3 · Derivation 11.3. Pushing a smooth wedge toward the side its face looks to, with acceleration a = g tan θ, keeps a block at rest on the face: in the wedge’s frame the pseudo force ma exactly cancels the slope component of the weight.

11.4 Effective gravity

The basic idea

In a uniformly accelerating frame, gravity and the pseudo force act on every body in proportion to its mass, exactly like a single modified gravity \(\vec g_{\text{eff}}=\vec g-\vec A\). Everything — pendulums, plumb lines, liquid surfaces, projectiles, the “down” you feel — behaves as if that were the real gravity. A lift accelerating upward has stronger gravity; one in free fall has none.

Derivation 11.4 · Effective gravity and the tilt of a liquid surface
  1. Forces per unit mass in S′: \(\vec g\) (real) and \(-\vec A\) (pseudo). They combine to \(\vec g_{\text{eff}}=\vec g-\vec A\) (Figure 11.4).
  2. Vertical A (lift, up positive): \(g_{\text{eff}}=g+A\). Everything in the lift falls, swings and weighs with \(g+A\) (Chapter 5, Example 8.7).
  3. Horizontal A: \(g_{\text{eff}}=\sqrt{g^2+A^2}\), tilted back from the vertical by \(\tan^{-1}(A/g)\).
  4. A liquid at rest in S′ has a surface perpendicular to \(\vec g_{\text{eff}}\) (otherwise the surface layer would slide). So a tank accelerating at A has a surface tilted by α with \(\tan\alpha=A/g\), higher at the back.
  5. A = 2 m/s²: tan α = 0.2, α = 11.3°.
\[ \vec g_{\text{eff}}=\vec g-\vec A;\qquad \tan\alpha=\frac Ag\ (\text{liquid surface}). \]
g−Ageff = g − Asurface ⟂ geff: tan α = A/gA

Figure 11.4 · Derivation 11.4. In a frame accelerating at A, everything behaves as if gravity were g_eff = g − A. A liquid surface sets itself perpendicular to g_eff, tilting by tan⁻¹(A/g) = 11.3° for A = 2 m/s², higher at the back.

Solved examples 11.1–11.6

Example 11.1

L2 Basic application
Problem
A 0.2 kg bob hangs from the roof of a car accelerating at 7.5 m/s² on a level road. Find the angle of the string with the vertical and its tension.
Concepts tested
Pendulum accelerometer
Given
m = 0.2 kg, a = 7.5 m/s²
To find
θ, T
Diagram or graph
Figure 11.2
Sign convention
—
Method
Car frame: T, mg and ma balance.
Detailed solution
  1. \(\tan\theta=7.5/10=0.75\Rightarrow\theta=36.9^\circ\), hanging backward.
  2. \(T=0.2\sqrt{100+56.25}=0.2\times12.5=2.5\) N.
Justification
Derivation 11.2
Calculation
36.9°; 2.5 N
Answer
36.9° backward from the vertical; 2.5 N
Interpretation
\(g_{\text{eff}}=12.5\) m/s² along the string.
Alternative method
Ground frame with the bob accelerating at a.
Common trap
Tilting the bob forward.
Recognise it
“Hangs from the roof of an accelerating car”.

Example 11.2

L2 Basic application
Problem
A truck accelerates at 3 m/s². A 2 kg ball lies on its smooth floor. Describe the ball’s motion in the ground frame and in the truck’s frame, and name the force responsible in each.
Concepts tested
Pseudo force
Given
A = 3 m/s², m = 2 kg, smooth floor
To find
Motion in both frames
Diagram or graph
Figure 11.1
Sign convention
Truck’s direction positive
Method
Ground: real forces only. Truck frame: add −mA.
Detailed solution
  1. Ground: horizontal real force zero, so a = 0: the ball stays where it is while the truck moves forward beneath it.
  2. Truck frame: pseudo force \(-mA=-6\) N: \(a’=-6/2=-3\) m/s², the ball rolls toward the back.
  3. Consistency: \(a’=a-A=0-3\) ✓.
Justification
Derivation 11.1
Calculation
a = 0; a′ = −3 m/s²
Answer
At rest in the ground frame; accelerating backward at 3 m/s² relative to the truck (pseudo force 6 N)
Interpretation
Nothing pushes the ball back; the truck accelerates out from under it.
Alternative method
—
Common trap
Inventing a real backward force in the ground frame.
Recognise it
Loose objects in accelerating vehicles.

Example 11.3

L3 JEE Main
Problem
A 1 kg block is placed on the smooth 37° face of a wedge. With what horizontal acceleration must the wedge be pushed for the block to stay at rest relative to it? Find the normal force then. What happens if the acceleration is 5 m/s²?
Concepts tested
Block at rest on an accelerating wedge
Given
m = 1 kg, θ = 37°
To find
a, N; motion for a = 5 m/s²
Diagram or graph
Figure 11.3
Sign convention
Down the face positive for relative motion
Method
\(a=g\tan\theta\); \(N=mg/\cos\theta\); otherwise \(a_{\text{rel}}=g\sin\theta-a\cos\theta\).
Detailed solution
  1. \(a=10\times0.75=7.5\) m/s².
  2. \(N=10/0.8=12.5\) N.
  3. a = 5 m/s²: \(a_{\text{rel}}=10(0.6)-5(0.8)=2\) m/s² down the face.
Justification
Derivation 11.3
Calculation
7.5 m/s²; 12.5 N; 2 m/s²
Answer
7.5 m/s²; 12.5 N; at 5 m/s² the block slides down the face at 2 m/s² relative to the wedge
Interpretation
The normal force exceeds mg: the face must both hold the block up and push it forward.
Alternative method
Ground frame: \(N\sin\theta=ma\), \(N\cos\theta=mg\).
Common trap
Pushing the wedge away from its face side.
Recognise it
“Block remains stationary relative to the wedge”.

Example 11.4

L3 JEE Main
Problem
A rectangular tank of water is on a truck accelerating at 2 m/s². Find the angle of the water surface with the horizontal. If the tank is 3 m long and the water at rest is 1 m deep, find the depths at the front and back walls.
Concepts tested
Effective gravity
Given
A = 2 m/s², length 3 m, depth 1 m
To find
α; depths at the walls
Diagram or graph
Figure 11.4
Sign convention
—
Method
\(\tan\alpha=A/g\); the surface pivots about the middle (volume unchanged).
Detailed solution
  1. \(\tan\alpha=0.2\Rightarrow\alpha=11.3^\circ\).
  2. Height difference across 3 m: \(3\times0.2=0.6\) m; ±0.3 m about the centre.
  3. Back: 1.3 m; front: 0.7 m.
Justification
Derivation 11.4
Calculation
11.3°; 1.3 m and 0.7 m
Answer
11.3°; 1.3 m at the back, 0.7 m at the front
Interpretation
The water piles up at the back, as coffee does when a car speeds up.
Alternative method
—
Common trap
Higher at the front.
Recognise it
Liquid in an accelerating container.

Example 11.5

L4 Advanced
Problem
A lift accelerates upward at 2 m/s². A boy in it throws a ball straight up at 6 m/s relative to the lift. Find the time the ball takes to return to his hand and the greatest height above the hand, relative to the lift.
Concepts tested
Effective gravity in a lift
Given
A = 2 m/s² up; u′ = 6 m/s
To find
t, H′
Sign convention
Up positive
Method
In the lift frame the ball moves under \(g_{\text{eff}}=12\) m/s².
Detailed solution
  1. \(g_{\text{eff}}=g+A=12\) m/s².
  2. Return: \(t=2u’/g_{\text{eff}}=12/12=1\) s.
  3. \(H’=u’^2/(2g_{\text{eff}})=36/24=1.5\) m.
Justification
Derivation 11.4
Calculation
1 s; 1.5 m
Answer
1 s; 1.5 m above his hand
Interpretation
In a stationary lift it would take 1.2 s and rise 1.8 m.
Why this method
Working in the lift frame removes the lift’s motion entirely; in the ground frame both the ball and the hand would have to be tracked.
Common trap
Using g = 10 m/s² in the lift frame.
Recognise it
Projectiles inside accelerating lifts.

Example 11.6

L5 Advanced challenge
Problem
Solve Example 10.6 (1 kg block on the smooth 37° face of a free 4 kg wedge) in the wedge’s frame, using a pseudo force on the block.
Concepts tested
Pseudo force applied to only the body observed from the frame; combining with the wedge’s real equation
Given
m = 1 kg, M = 4 kg, θ = 37°
To find
A, \(a_r\), N
Sign convention
A backward (away from the block’s side); \(a_r\) down the face
Method
Wedge frame: block feels N, mg and pseudo force mA (forward, opposite to A). No motion perpendicular to the face. Wedge in the ground frame: \(N\sin\theta=MA\).
Detailed solution
  1. Block perpendicular to the face (no relative motion): \(N+mA\sin\theta=mg\cos\theta\Rightarrow N=8-0.6A\).
  2. Wedge: \(N\sin\theta=MA\Rightarrow0.6N=4A\).
  3. Substitute: \(0.6(8-0.6A)=4A\Rightarrow4.8=4.36A\Rightarrow A=1.10\) m/s²; \(N=8-0.66=7.34\) N.
  4. Block along the face: \(ma_r=mg\sin\theta+mA\cos\theta=6+0.88\Rightarrow a_r=6.88\) m/s².
  5. All agree with Example 10.6 ✓.
Justification
Derivation 11.1 with the constraint of Derivation 10.5
Calculation
1.10 m/s²; 6.88 m/s²; 7.34 N
Answer
A = 1.10 m/s², \(a_r=6.88\) m/s², N = 7.34 N
Interpretation
In the wedge frame the pseudo force tilts the block’s effective gravity, reducing its push on the face.
Why this method
In the wedge frame the block’s acceleration is along the face only, so the perpendicular equation has no acceleration term and gives N in one line.
Common trap
Adding a pseudo force to the wedge’s own equation in the ground frame.
Recognise it
Block on a free wedge; “find N”.

Exercise 11

Q11.1L1Single correct · pseudo force · 1 min

In a frame with acceleration \(\vec A\), the pseudo force on a body of mass m is

(A) \(m\vec A\)(B) \(-m\vec A\)(C) zero(D) \(m\vec g\)
Solution
(B).
Q11.2L2Numerical · pendulum · 1 min

A pendulum in a train hangs at 45° to the vertical. Find the train’s acceleration.

Solution
\(a=g\tan45^\circ=\) 10 m/s².
Q11.3L2Numerical · lift pendulum · 2 min

A simple pendulum of period 2 s in a stationary lift is taken into a lift accelerating upward at 2.5 m/s². Find its new period.

Solution
\(T\propto1/\sqrt{g_{\text{eff}}}\): \(2\sqrt{10/12.5}=\) 1.79 s.
Q11.4L3Numerical · wedge · 2 min

Find the acceleration with which a smooth 30° wedge must be pushed so that a block on it does not slide.

Solution
\(10\tan30^\circ=\) 5.77 m/s².
Q11.5L3Assertion–reason · pseudo force · 2 min

Assertion: A pseudo force has no reaction. Reason: It is not exerted by any body.

(A) Both true, R explains A(B) Both true, R does not explain A(C) A true, R false(D) A false, R true
Solution
(A).
Q11.6L4Numerical · braking bus · 3 min

A bus moving at 20 m/s brakes uniformly to rest in 40 m. A 2 kg bag on the smooth floor is not held. Find its acceleration relative to the bus and the time it takes to slide 2 m toward the front.

Solution
Bus deceleration \(400/80=5\) m/s²; bag (no real force) relative acceleration 5 m/s² forward; \(2=\tfrac12(5)t^2\Rightarrow\) t = 0.894 s (the bus has not yet stopped: 4 s).
Q11.7L4Multiple correct · effective gravity · 3 min

In a lift falling freely,

(A) a pendulum does not oscillate(B) water does not flow out of a hole in a can(C) a spring balance reads the true weight(D) a ball released from rest stays in place relative to the lift
Solution
(A), (B), (D). \(g_{\text{eff}}=0\); the spring balance reads zero.
Q11.8L5Numerical · block in an accelerating lift on an incline · 4 min

A smooth 30° incline is fixed inside a lift that accelerates upward at 2 m/s². A 1 kg block slides on it. Find its acceleration relative to the incline and the normal force.

Solution
\(g_{\text{eff}}=12\) m/s²: \(a_{\text{rel}}=12\sin30^\circ=\) 6 m/s²; \(N=1(12)\cos30^\circ=\) 10.4 N.

Chapter 12 · Techniques and common mistakes

12.1 Problem-solving techniques

The basic idea

Almost every problem in this unit follows the same four moves: choose the body, draw its free-body diagram, write \(\sum\vec F=m\vec a\) along well-chosen axes, and add constraint relations until the number of equations equals the number of unknowns. The techniques below are shortcuts for doing those moves quickly and safely.

TechniqueUse it whenSeen in
One FBD per body, forces “by X on Y”Always; essential when bodies touchCh 1, Ex 4.1
System first, then one bodyBodies share an accelerationEx 8.1, 8.5, 5.4
Axes along the accelerationInclines, wedges, pendulums in carsCh 10, Ex 11.1
Lami’s theorem / triangle of forcesExactly three forces in equilibriumEx 2.3
Cut the ropeTension at a point of a heavy ropeEx 6.3, 6.5
String length = constantMovable pulleys, strings at anglesCh 9
Equal normal componentsWedges, rods on wedgesEx 9.4, 10.6
Effective gravity g + AAnything inside a lift or accelerating vehicleEx 8.7, 11.5
Momentum flux \(v\,dm/dt\)Belts, jets, chains, rocketsEx 3.6–3.8
Spring force is continuous“Just after the string is cut”Ex 7.5
Check limits (θ → 0, 90°; M → ∞)Any derived formulaDerivations 10.1, 10.5
Table 12.1 · Techniques and their signals.

12.2 Twenty common mistakes

The basic idea

Each mistake below comes with the correct statement and a one-line diagnostic question. If you get the diagnostic right without hesitation, the mistake is not yours.

M1 · “A force is needed to keep a body moving”

Correct
A net force changes velocity; uniform motion needs none.
Diagnostic
Net force on a puck gliding at 5 m/s on smooth ice? Zero.

M2 · N and W as an action–reaction pair

Correct
They act on the same body; the partner of W is the body’s pull on the Earth.
Diagnostic
Partner of the normal force on a book? The book’s push on the table.

M3 · N = mg always

Correct
Find N from the equation perpendicular to the surface.
Diagnostic
N on 5 kg pulled up at 30° by 40 N? 30 N.

M4 · Drawing “ma” as a force

Correct
ma is the result of the forces, not one of them (except −mA as a pseudo force in a non-inertial frame).
Diagnostic
Forces on a falling stone? Only mg.

M5 · Forces on other bodies in an FBD

Correct
Only forces acting on the chosen body.
Diagnostic
Does the force of block 1 on block 2 appear in block 1’s FBD? No.

M6 · Contact force = applied force

Correct
\(N=m_2F/(m_1+m_2)\).
Diagnostic
20 N pushes 2 kg against 3 kg? 12 N.

M7 · Atwood tension = heavier weight

Correct
\(T=2m_1m_2g/(m_1+m_2)\), between the weights.
Diagnostic
3 kg and 2 kg? 24 N.

M8 · Same acceleration for every body in a pulley system

Correct
Write the string-length constraint.
Diagnostic
Free end vs movable pulley? Twice as fast.

M9 · v = u cos θ for a string at an angle

Correct
u = v cos θ: the string speed is the body’s component along it.
Diagnostic
Reeled at 2 m/s at 60°? Block 4 m/s.

M10 · Tension the same throughout a heavy rope

Correct
Cut the rope and use the piece beyond the cut.
Diagnostic
4 kg rope pulled with 20 N, tension at its far end? Zero.

M11 · Clamp force = 2T at any angle

Correct
\(2T\cos(\theta/2)\).
Diagnostic
Segments at 90°, T = 20 N? 28.3 N.

M12 · Velocity instead of acceleration in lift problems

Correct
N = m(g + a); velocity is irrelevant.
Diagnostic
Lift going up at constant 5 m/s, 60 kg? 600 N.

M13 · Series and parallel springs swapped

Correct
Series: \(1/k=\sum1/k_i\); parallel: \(k=\sum k_i\).
Diagnostic
100 and 300 N/m in series? 75 N/m.

M14 · Spring force vanishing when a string is cut

Correct
The spring force is unchanged at that instant.
Diagnostic
Lower block of Figure 7.4 just after the cut? a = 0.

M15 · N = mg cos θ on an accelerating or free wedge

Correct
Solve with the wedge’s motion: mg/cos θ (block at rest on pushed wedge), \(Mmg\cos\theta/(M+m\sin^2\theta)\) (free wedge).
Diagnostic
Block at rest on a 37° wedge pushed at 7.5 m/s²? 12.5m.

M16 · Pseudo force in an inertial frame

Correct
Use −mA only when working in the accelerating frame.
Diagnostic
Forces on a car passenger, ground frame? Seat forces and weight only.

M17 · \(\Delta p=0\) in a rebound

Correct
Momentum reverses: \(|\Delta p|=2mv\cos\theta\).
Diagnostic
0.2 kg at 10 m/s head-on and back? 4 N·s.

M18 · F = ma for systems gaining mass

Correct
Use \(F=d(mv)/dt\): a belt at constant speed needs \(v\,dm/dt\).
Diagnostic
Sand at 5 kg/s onto a 2 m/s belt? 10 N.

M19 · Weight in kg

Correct
Weight is a force, in N; mass in kg.
Diagnostic
Weight of 70 kg on the Moon? 112 N.

M20 · Internal forces moving a system

Correct
Only external forces change the system’s momentum.
Diagnostic
What accelerates a horse and cart? The ground’s push on the hooves.

Exercise 12

Q12.1L4Assertion–reason · normal force · 2 min

Assertion: The normal force on a body can exceed its weight even on a horizontal floor. Reason: The normal force adjusts to prevent motion into the surface.

(A) Both true, R explains A(B) Both true, R does not explain A(C) A true, R false(D) A false, R true
Solution
(A). Pressing down or accelerating upward both raise N.
Q12.2L4Multiple correct · FBD · 3 min

A block is pulled up a smooth incline by a string parallel to it, at constant velocity. Which forces act on the block?

(A) Tension up the incline(B) Weight(C) Normal force(D) A force of motion up the incline
Solution
(A), (B), (C). There is no “force of motion”; T = mg sin θ.
Q12.3L5Numerical · find the error · 3 min

A student finds the tension in an Atwood machine (4 kg, 1 kg) as T = (4 − 1)g = 30 N. Find the correct tension and the correct acceleration.

Solution
\(a=3g/5=\) 6 m/s²; \(T=2(4)(1)g/5=\) 16 N. The student used the net driving force as the tension.
Q12.4L5Numerical · two-stage reasoning · 4 min

A 3 kg block on a smooth table is joined over the edge to a hanging 2 kg block, 1.6 m above the floor. Released from rest, how far does the table block move after the hanging block lands, if the table is long and smooth? Find the time from release until the table block has moved 3 m.

Solution
a = 4 m/s²; landing after \(t_1=\sqrt{0.8}=0.894\) s at v = 3.58 m/s; afterwards the table block moves uniformly for ever (smooth table, string slack). Remaining 1.4 m takes 1.4/3.578 = 0.391 s: total 1.29 s.

Chapter 13 · Extended practice

Twenty-six further questions across all chapters, with full solutions. Take g = 10 m/s².

Practice set

Q13.1L1Numerical · weight · 1 min

Find the weight of a 2.5 kg book.

Solution
25 N.
Q13.2L1Numerical · second law · 1 min

A 10 N net force acts on a 2 kg body. Find its acceleration.

Solution
5 m/s².
Q13.3L1Numerical · impulse · 1 min

A constant 4 N force acts for 3 s. Find the impulse.

Solution
12 N·s.
Q13.4L2Numerical · pull at an angle · 2 min

A 3 kg block on a smooth floor is pulled by 12 N at 60° above the horizontal. Find its acceleration and the normal force.

Solution
\(a=12\cos60^\circ/3=\) 2 m/s²; \(N=30-12\sin60^\circ=\) 19.6 N.
Q13.5L2Numerical · lift · 1 min

A 50 kg woman stands on a scale in a lift accelerating downward at 3 m/s². Find the reading.

Solution
\(50(10-3)=\) 350 N.
Q13.6L2Numerical · Atwood · 2 min

Masses of 6 kg and 4 kg hang over an ideal pulley. Find the acceleration and the tension.

Solution
\(a=2/10\times10=\) 2 m/s²; \(T=4(12)=\) 48 N.
Q13.7L2Numerical · spring · 1 min

A spring of constant 500 N/m is compressed by 4 cm. Find the force it exerts.

Solution
20 N.
Q13.8L3Numerical · symmetric strings · 2 min

A 3 kg lamp hangs from two strings, each at 60° to the vertical. Find the tension in each.

Solution
\(2T\cos60^\circ=30\Rightarrow\) T = 30 N.
Q13.9L3Numerical · variable force · 2 min

A force \(F=(4-2t)\) N acts on a 2 kg body at rest from t = 0. Find its greatest speed.

Solution
Speed is greatest when F = 0, at t = 2 s: \(v=\tfrac12\int_0^2(4-2t)dt=\) 2 m/s.
Q13.10L3Numerical · string on incline · 2 min

A 5 kg block is pulled up a smooth 30° incline by a string parallel to it, with acceleration 2 m/s². Find the tension.

Solution
\(T=25+10=\) 35 N.
Q13.11L3Numerical · two blocks · 2 min

Blocks of 4 kg and 6 kg on a smooth floor are joined by a string. A 50 N force pulls the 6 kg block. Find a and T.

Solution
5 m/s²; \(T=4\times5=\) 20 N.
Q13.12L3Numerical · bouncing ball · 3 min

A 0.5 kg ball dropped from 5 m rebounds to 1.8 m. Contact lasts 0.1 s. Find the impulse and the average force of the floor.

Solution
Speeds 10 m/s down, 6 m/s up: J = 8 N·s up. Net average force 80 N, so the floor exerts \(80+5=\) 85 N.
Q13.13L4Numerical · chain off a table · 3 min

A uniform 2 kg chain, 2 m long, lies on a smooth table with part of it hanging over the edge. Find its acceleration and the tension at the edge when 1 m hangs.

Solution
\(a=g\,x/L=\) 5 m/s²; tension accelerates the 1 kg on the table: 5 N.
Q13.14L4Numerical · wedge · 2 min

With what acceleration must a smooth 53° wedge be pushed so that a block stays at rest on its face?

Solution
\(10\tan53^\circ=\) 13.3 m/s².
Q13.15L4Numerical · string in a lift · 2 min

A 20 kg mass hangs by a string from a lift ceiling. The string breaks at 300 N. Find the greatest upward acceleration of the lift.

Solution
\(300=20(10+a)\Rightarrow\) 5 m/s².
Q13.16L4Numerical · movable pulley · 2 min

A 10 kg load hangs from a light movable pulley. One end of the string is fixed to the ceiling; the other is pulled upward with 60 N. Find the load’s acceleration.

Solution
\(2(60)-100=10a\Rightarrow\) 2 m/s² upward.
Q13.17L4Numerical · climbing a rope · 3 min

A 20 kg monkey climbs a light rope that can bear 300 N. Find its greatest upward acceleration and the tension when it slides down with acceleration 2 m/s².

Solution
\(300-200=20a\Rightarrow\) 5 m/s²; sliding: \(20(10-2)=\) 160 N.
Q13.18L4Numerical · blocks on an incline · 3 min

Blocks of 2 kg (upper) and 4 kg (lower), joined by a string along a smooth 30° incline, are pulled up the slope by 60 N applied to the upper block. Find a and T.

Solution
\(a=(60-60\times0.5)/6=\) 5 m/s²; \(T=4(5+5)=\) 40 N.
Q13.19L4Numerical · deflected jet · 3 min

Water at 0.5 kg/s and 20 m/s strikes a plate that turns it through 90° without change of speed. Find the force on the plate.

Solution
Each kg changes momentum by \(20\sqrt2\): \(F=0.5\times28.3=\) 14.1 N.
Q13.20L5Numerical · double Atwood · 5 min

A 4 kg mass hangs on one side of a fixed ideal pulley. The other side carries a light movable pulley over which 1 kg and 2 kg masses hang. Find the acceleration of each mass and both tensions.

Solution
The movable pair acts as \(4m_1m_2/(m_1+m_2)=8/3\) kg. Main: \(a=\dfrac{4-8/3}{4+8/3}g=\) 2 m/s² (4 kg down), \(T_1=\) 32 N, \(T_2=\) 16 N. In the movable pulley’s frame \(g_{\text{eff}}=12\): relative \(a_r=12/3=4\): 2 kg 2 m/s² down, 1 kg 6 m/s² up.
Q13.21L5Numerical · spring in a car · 3 min

A 0.5 kg mass hangs from a light spring (k = 50 N/m) attached to the roof of a car accelerating at 7.5 m/s². Find the spring’s angle with the vertical and its extension.

Solution
\(\tan\theta=0.75\Rightarrow\) 36.9°; \(x=m\,g_{\text{eff}}/k=0.5(12.5)/50=\) 0.125 m.
Q13.22L5Numerical · monkey and counterweight · 4 min

A 10 kg monkey holds one end of a light rope over an ideal pulley; a 10 kg block hangs from the other end. The monkey climbs with acceleration 2 m/s² relative to the rope. Find the ground accelerations and the tension.

Solution
Both feel T − 100 = 10a, so they rise together with the same a; relative to the rope the monkey moves at 2a = 2: a = 1 m/s² up for both; T = 110 N.
Q13.23L5Numerical · push on a free wedge · 3 min

A 1 kg block sits on the smooth 37° face of a 4 kg wedge on a smooth floor. What horizontal force on the wedge keeps the block at rest relative to it?

Solution
Common acceleration \(g\tan37^\circ=7.5\) m/s²: \(F=5\times7.5=\) 37.5 N.
Q13.24L5Numerical · moving wall · 3 min

A 0.1 kg ball moving at 15 m/s hits a massive wall moving toward it at 5 m/s, and rebounds elastically in the wall’s frame. Find the ball’s speed after the bounce and the impulse.

Solution
Wall frame: 20 m/s in and out; ground: 25 m/s. \(J=0.1(25+15)=\) 4 N·s.
Q13.25L4Numerical · spring in a lift · 2 min

A 2 kg block hangs from a spring (k = 300 N/m) in a lift accelerating downward at 4 m/s². Find the extension.

Solution
\(x=2(6)/300=\) 4 cm.
Q13.26L5Numerical · springs and a string · 4 min

Three 1 kg blocks hang in a vertical line: the ceiling holds A by spring 1, A holds B by spring 2, and B holds C by a string. The string is cut. Find the accelerations of A, B and C just afterwards.

Solution
Spring forces before: 30 N and 20 N. After: A: 30 − 10 − 20 = 0 ⇒ 0; B: 20 − 10 = 10 N up ⇒ 10 m/s² up; C: 10 m/s² down.

Formula derivations

Resultant of two forces

Formula
\(R=\sqrt{F_1^2+F_2^2+2F_1F_2\cos\theta}\), \(\tan\alpha=\dfrac{F_2\sin\theta}{F_1+F_2\cos\theta}\)
Starting point
Parallelogram law; Pythagoras on the completed triangle.
Assumptions
Forces act at one point.
Derivation
Derivation 1.1.
Meaning of each term
θ angle between the forces; α angle of R from \(F_1\).
Dimensions
MLT⁻².
Sign convention
θ from \(F_1\) to \(F_2\).
Valid range
\(|F_1-F_2|\le R\le F_1+F_2\).
Correct use
4 N and 3 N at 60°: 6.08 N.
Inappropriate use
Adding magnitudes for non-parallel forces.

Lami’s theorem

Formula
\(\dfrac{P}{\sin\alpha}=\dfrac{Q}{\sin\beta}=\dfrac{R}{\sin\gamma}\)
Starting point
Sine rule in the closed triangle of forces.
Assumptions
Exactly three concurrent forces in equilibrium.
Derivation
Derivation 2.4.
Meaning of each term
α is the angle between the other two forces.
Dimensions
—
Sign convention
—
Valid range
Three forces only.
Correct use
200 N weight on strings at 37° and 53° to the vertical: 160 N, 120 N.
Inappropriate use
Using the angle a force makes with the vertical.

Second law and impulse

Formula
\(\vec F=\dfrac{d\vec p}{dt}=m\vec a\); \(\vec J=\int\vec F\,dt=\Delta\vec p\)
Starting point
Newton’s second law; integrate over time.
Assumptions
Inertial frame; m constant for \(m\vec a\).
Derivation
Derivations 3.1, 3.3.
Meaning of each term
Net external force; impulse as area under F–t.
Dimensions
MLT⁻²; MLT⁻¹.
Sign convention
Vector: components separately.
Valid range
Any inertial frame.
Correct use
0.2 kg at 10 m/s, 60° to the normal, rebounding: \(|\Delta p|=2\) N·s.
Inappropriate use
\(F=mv\).

Variable mass

Formula
\(F=v\,\dfrac{dm}{dt}\) (belt); \(F=\rho Av^2\) (jet stopped)
Starting point
Momentum supplied per second.
Assumptions
Steady flow.
Derivation
Derivation 3.5.
Meaning of each term
Force to bring incoming mass to speed v.
Dimensions
MLT⁻².
Sign convention
Along the momentum change.
Valid range
Constant speed belts, steady jets.
Correct use
5 kg/s on a 2 m/s belt: 10 N.
Inappropriate use
F = ma = 0 because v is constant.

Apparent weight

Formula
\(N=m(g+a)\), a upward positive
Starting point
Second law for a person in a lift.
Assumptions
Vertical acceleration.
Derivation
Derivation 5.2.
Meaning of each term
Scale reading.
Dimensions
MLT⁻².
Sign convention
a > 0 upward.
Valid range
N ≥ 0 (contact).
Correct use
60 kg, a = +2: 720 N.
Inappropriate use
Using the lift’s velocity.

Springs

Formula
\(F=-kx\); series \(1/k=\sum1/k_i\); parallel \(k=\sum k_i\); piece \(k_\ell=kL/\ell\)
Starting point
Hooke’s law; equal force (series) or equal stretch (parallel).
Assumptions
Light springs, elastic range.
Derivation
Derivations 7.1–7.4.
Meaning of each term
Restoring force; stiffness.
Dimensions
k: MT⁻².
Sign convention
Force opposite to displacement from natural length.
Valid range
Small deformations.
Correct use
100 and 300 N/m: 75 (series), 400 (parallel).
Inappropriate use
Swapping the rules.

Atwood machine

Formula
\(a=\dfrac{m_1-m_2}{m_1+m_2}g\), \(T=\dfrac{2m_1m_2}{m_1+m_2}g\)
Starting point
Second law for each mass, same T and a.
Assumptions
Light string, ideal pulley.
Derivation
Derivation 8.3.
Meaning of each term
Weight difference accelerates total mass.
Dimensions
LT⁻²; MLT⁻².
Sign convention
Heavier mass down.
Valid range
Any \(m_1>m_2\).
Correct use
3 kg, 2 kg: 2 m/s², 24 N.
Inappropriate use
T = heavier weight.

Movable pulley

Formula
\(a_2=2a_1\); \(a_1=\dfrac{2m_2-m_1}{m_1+4m_2}g\)
Starting point
String-length constraint \(2x_A+x_B=\) const.
Assumptions
Light pulleys and string.
Derivation
Derivations 9.1–9.2.
Meaning of each term
Free end moves twice as far.
Dimensions
LT⁻².
Sign convention
\(a_1\) up (pulley mass), \(a_2\) down (free mass).
Valid range
Two-strand support.
Correct use
4 kg and 1 kg: −2.5 and −5 m/s².
Inappropriate use
Equal accelerations.

Incline and free wedge

Formula
Fixed: \(a=g\sin\theta\), \(N=mg\cos\theta\). Free wedge: \(A=\dfrac{mg\sin\theta\cos\theta}{M+m\sin^2\theta}\), \(N=\dfrac{Mmg\cos\theta}{M+m\sin^2\theta}\)
Starting point
Resolve along and across the slope; Newton for both bodies with the contact constraint.
Assumptions
Smooth surfaces.
Derivation
Derivations 10.1, 10.5.
Meaning of each term
A wedge acceleration; N contact force.
Dimensions
LT⁻²; MLT⁻².
Sign convention
As in Figure 10.5.
Valid range
M → ∞ recovers the fixed incline.
Correct use
m = 1, M = 4, 37°: A = 1.10 m/s², N = 7.34 N.
Inappropriate use
N = mg cos θ for a moving wedge.

Pseudo force

Formula
\(m\vec a\,’=\vec F_{\text{real}}-m\vec A\); \(\vec g_{\text{eff}}=\vec g-\vec A\)
Starting point
\(\vec a\,’=\vec a-\vec A\).
Assumptions
Non-rotating frame with acceleration \(\vec A\).
Derivation
Derivations 11.1, 11.4.
Meaning of each term
Fictitious force that restores Newton’s law in S′.
Dimensions
MLT⁻².
Sign convention
Opposite to the frame’s acceleration.
Valid range
Non-inertial (translating) frames only.
Correct use
Pendulum in a car: tan θ = a/g.
Inappropriate use
Adding −mA in the ground frame.

Formula reference table

QuantityFormulaConditionsSI unitCommon mistake
Resultant\(\sqrt{F_1^2+F_2^2+2F_1F_2\cos\theta}\)Two forces at a pointNAdding magnitudes
Equilibrium\(\sum F_x=\sum F_y=0\)a = 0—Missing a force
Second law\(\vec F=d\vec p/dt=m\vec a\)Inertial frameNF = mv
Impulse\(\int F\,dt=\Delta p\)AnyN·sPeak force × time
Rebound\(2mv\cos\theta\)Smooth wall, same speedN·sΔp = 0
Belt / jet\(v\,dm/dt\); \(\rho Av^2\)Steady flowNF = ma
Recoil\(V=mv/M\)Isolated, from restm/sEqual energies
Apparent weight\(m(g+a)\)Vertical aNVelocity used
Heavy rope\(T=(\text{mass beyond cut})\times a\)Any ropeNUniform T
Pulley clamp\(2T\cos(\theta/2)\)Ideal pulleyNAlways 2T
Springs\(kx\); \(k_s\), \(k_p\)ElasticN, N/mRules swapped
Contact force\(m_2F/(m_1+m_2)\)Smooth floorNN = F
Atwood\((m_1-m_2)g/(m_1+m_2)\); \(2m_1m_2g/(m_1+m_2)\)Ideal pulleym/s², NT = m₁g
Table + hanging\(m_2g/(m_1+m_2)\)Smooth tablem/s²T = m₂g
String at an angle\(u=v\cos\theta\)Inextensiblem/sv = u cos θ
Wedge constraint\(v=V\tan\theta\)Vertical rod on wedgem/ssin or cos
Smooth incline\(g\sin\theta\); \(N=mg\cos\theta\)Fixed inclinem/s², NN = mg
Chords\(\sqrt{4R/g}\)From the top of a vertical circlesVertical is fastest
Pendulum in a car\(\tan\theta=a/g\)Steady angle—Forward tilt
Block at rest on a pushed wedge\(a=g\tan\theta\), \(N=mg/\cos\theta\)Smooth facem/s², NN = mg cos θ
Formula reference table.

Comparison tables

LawStatementWhat it gives you
FirstNo net force ⇔ constant velocityInertia; inertial frames; equilibrium
Second\(\vec F=d\vec p/dt\)Quantitative dynamics; impulse
Third\(\vec F_{AB}=-\vec F_{BA}\)Interactions in pairs; momentum conservation
Table T1 · The three laws.
ForceDirectionSizeCan it vanish suddenly?
WeightDownmgNo
NormalPerpendicular to the surface, outwardWhatever prevents penetration (≥ 0)Yes (loss of contact)
TensionAlong the string, away from the bodyWhatever keeps the string’s length (≥ 0)Yes (string cut or slack)
SpringToward the natural lengthk|x|No (needs the length to change)
PseudoOpposite to the frame’s accelerationmAOnly if the frame stops accelerating
Table T2 · The forces of this unit.
SituationInertial (ground) frameAccelerating frame
Forces usedReal forces onlyReal forces + \(-m\vec A\)
Pendulum in a carBob accelerates with the carBob at rest; \(g_{\text{eff}}\) tilted
Block on a pushed wedgeBlock accelerates at aBlock at rest
Lift problemsN − mg = ma\(g_{\text{eff}}=g+a\)
Table T3 · Choosing the frame.

Question bank by level

Every exercise and test question, grouped by level with links.

LevelQuestions
L1 Foundation28
L2 Basic application29
L3 JEE Main30
L4 Advanced28
L5 Advanced challenge23
Questions per level (138 in total).
L1 Foundation · 28 questions
  1. Q1.1 Numerical · resultant · 1 min
  2. Q1.2 Single correct · contact force · 1 min
  3. Q1.3 Numerical · components · 1 min
  4. Q2.1 Single correct · first law · 1 min
  5. Q2.2 Single correct · inertia · 1 min
  6. Q3.1 Numerical · F = ma · 1 min
  7. Q3.2 Single correct · units · 1 min
  8. Q3.3 Numerical · stopping force · 1 min
  9. Q4.1 Single correct · third law · 1 min
  10. Q4.2 Numerical · recoil · 1 min
  11. Q5.1 Numerical · weight · 1 min
  12. Q5.2 Single correct · free fall · 1 min
  13. Q6.1 Numerical · tension · 1 min
  14. Q6.2 Single correct · ideal pulley · 1 min
  15. Q7.1 Numerical · Hooke · 1 min
  16. Q7.2 Single correct · series · 1 min
  17. Q8.1 Numerical · Atwood · 1 min
  18. Q8.2 Numerical · contact force · 1 min
  19. Q9.1 Single correct · constraint · 1 min
  20. Q10.1 Numerical · incline · 1 min
  21. Q10.2 Single correct · normal force · 1 min
  22. Q11.1 Single correct · pseudo force · 1 min
  23. Q13.1 Numerical · weight · 1 min
  24. Q13.2 Numerical · second law · 1 min
  25. Q13.3 Numerical · impulse · 1 min
  26. QM.1 Numerical · second law · +4/0
  27. QM.2 Single correct · units · +4/−1
  28. QM.3 Numerical · weight · +4/0
L2 Basic application · 29 questions
  1. Q1.4 Numerical · equal forces · 2 min
  2. Q1.5 Numerical · net force · 2 min
  3. Q2.3 Numerical · equilibrium · 2 min
  4. Q2.4 Assertion–reason · inertial frames · 2 min
  5. Q3.4 Numerical · impulse · 2 min
  6. Q3.5 Numerical · F–t graph · 2 min
  7. Q4.3 Numerical · explosion · 2 min
  8. Q4.4 Assertion–reason · pairs · 2 min
  9. Q5.3 Numerical · normal force · 1 min
  10. Q5.4 Numerical · lift · 2 min
  11. Q6.3 Numerical · clamp force · 1 min
  12. Q6.4 Numerical · rope tension · 2 min
  13. Q7.3 Numerical · balance · 1 min
  14. Q7.4 Numerical · parallel · 2 min
  15. Q8.3 Numerical · table system · 2 min
  16. Q8.4 Single correct · tension · 1 min
  17. Q9.2 Numerical · reeled string · 1 min
  18. Q9.3 Numerical · wedge · 1 min
  19. Q10.3 Numerical · speed at the bottom · 1 min
  20. Q10.4 Numerical · force along incline · 2 min
  21. Q11.2 Numerical · pendulum · 1 min
  22. Q11.3 Numerical · lift pendulum · 2 min
  23. Q13.4 Numerical · pull at an angle · 2 min
  24. Q13.5 Numerical · lift · 1 min
  25. Q13.6 Numerical · Atwood · 2 min
  26. Q13.7 Numerical · spring · 1 min
  27. QM.4 Numerical · Atwood · +4/0
  28. QM.5 Numerical · lift · +4/0
  29. QM.6 Multiple correct · third law · +4/+1/−2
L3 JEE Main · 30 questions
  1. Q1.6 Numerical · angle from resultant · 2 min
  2. Q1.7 Numerical · normal force with a pull · 2 min
  3. Q2.5 Numerical · Lami · 2 min
  4. Q2.6 Numerical · symmetric strings · 2 min
  5. Q3.6 Numerical · variable force · 2 min
  6. Q3.7 Numerical · machine gun · 2 min
  7. Q4.5 Numerical · boat · 2 min
  8. Q4.6 Numerical · train of wagons · 2 min
  9. Q5.5 Numerical · losing contact · 2 min
  10. Q5.6 Multiple correct · apparent weight · 2 min
  11. Q6.5 Numerical · breaking string · 2 min
  12. Q6.6 Numerical · pulled rope · 2 min
  13. Q7.5 Numerical · cut spring · 2 min
  14. Q7.6 Numerical · spring in a lift · 2 min
  15. Q8.5 Numerical · balanced incline · 2 min
  16. Q8.6 Numerical · two hanging masses · 2 min
  17. Q9.4 Numerical · movable pulley balance · 2 min
  18. Q9.5 Numerical · movable pulley · 2 min
  19. Q10.5 Numerical · ratio of times · 2 min
  20. Q10.6 Assertion–reason · chords · 2 min
  21. Q11.4 Numerical · wedge · 2 min
  22. Q11.5 Assertion–reason · pseudo force · 2 min
  23. Q13.8 Numerical · symmetric strings · 2 min
  24. Q13.9 Numerical · variable force · 2 min
  25. Q13.10 Numerical · string on incline · 2 min
  26. Q13.11 Numerical · two blocks · 2 min
  27. Q13.12 Numerical · bouncing ball · 3 min
  28. QM.7 Numerical · incline · +4/0
  29. QM.8 Numerical · springs · +4/0
  30. QM.9 Numerical · pendulum · +4/0
L4 Advanced · 28 questions
  1. Q1.8 Numerical · resultant perpendicular to one force · 3 min
  2. Q2.7 Multiple correct · equilibrium · 3 min
  3. Q2.8 Numerical · minimum force · 3 min
  4. Q3.8 Numerical · oblique impulse · 3 min
  5. Q3.9 Multiple correct · second law · 3 min
  6. Q4.7 Multiple correct · Earth and apple · 3 min
  7. Q5.7 Numerical · ball in a lift · 3 min
  8. Q6.7 Numerical · minimum time · 3 min
  9. Q7.7 Multiple correct · cutting · 3 min
  10. Q8.7 Numerical · time to meet · 3 min
  11. Q8.8 Multiple correct · Atwood · 3 min
  12. Q9.6 Numerical · three strands · 3 min
  13. Q10.7 Numerical · horizontal push · 3 min
  14. Q11.6 Numerical · braking bus · 3 min
  15. Q11.7 Multiple correct · effective gravity · 3 min
  16. Q12.1 Assertion–reason · normal force · 2 min
  17. Q12.2 Multiple correct · FBD · 3 min
  18. Q13.13 Numerical · chain off a table · 3 min
  19. Q13.14 Numerical · wedge · 2 min
  20. Q13.15 Numerical · string in a lift · 2 min
  21. Q13.16 Numerical · movable pulley · 2 min
  22. Q13.17 Numerical · climbing a rope · 3 min
  23. Q13.18 Numerical · blocks on an incline · 3 min
  24. Q13.19 Numerical · deflected jet · 3 min
  25. Q13.25 Numerical · spring in a lift · 2 min
  26. QM.10 Numerical · constraint · +4/0
  27. QM.11 Numerical · falling rope · +4/0
  28. QM.12 Numerical · pushed wedge · +4/0
L5 Advanced challenge · 23 questions
  1. Q3.10 Numerical · rocket thrust · 3 min
  2. Q4.8 Numerical · three-piece explosion · 4 min
  3. Q5.8 Numerical · beam balance in a lift · 3 min
  4. Q6.8 Numerical · man on a plank · 4 min
  5. Q7.8 Numerical · two springs, one block · 4 min
  6. Q8.9 Numerical · pushing a stack up an incline · 4 min
  7. Q9.7 Numerical · block on a free wedge · 4 min
  8. Q10.8 Numerical · free wedge · 4 min
  9. Q11.8 Numerical · block in an accelerating lift on an incline · 4 min
  10. Q12.3 Numerical · find the error · 3 min
  11. Q12.4 Numerical · two-stage reasoning · 4 min
  12. Q13.20 Numerical · double Atwood · 5 min
  13. Q13.21 Numerical · spring in a car · 3 min
  14. Q13.22 Numerical · monkey and counterweight · 4 min
  15. Q13.23 Numerical · push on a free wedge · 3 min
  16. Q13.24 Numerical · moving wall · 3 min
  17. Q13.26 Numerical · springs and a string · 4 min
  18. QC.1 Free wedge · 10 marks
  19. QC.2 Movable pulley · 10 marks
  20. QC.3 Atwood in a lift · 10 marks
  21. QC.4 Heavy rope · 10 marks
  22. QC.5 Variable mass · 10 marks
  23. QC.6 Spring-joined blocks · 10 marks

Revision guide and examination preparation

One-page conceptual summary

Force. An interaction between two bodies; a vector, added by the parallelogram law or by components. Contact forces (normal, tension, spring, friction) and field forces (gravity). Every problem starts with a free-body diagram of one body.

First law. Zero net force ⇔ constant velocity. It defines inertial frames; frames moving uniformly relative to an inertial frame are inertial. Equilibrium: \(\sum F_x=\sum F_y=0\); three forces: Lami’s theorem.

Second law. \(\vec F=d\vec p/dt\), which is \(m\vec a\) for constant mass, applied component by component. Impulse \(\int\vec F\,dt=\Delta\vec p\); rebounds reverse the normal momentum; streams of mass need \(v\,dm/dt\).

Third law. Forces come in equal and opposite pairs on different bodies; internal forces cancel, so an isolated system conserves momentum (recoil).

Common forces. Weight mg; normal force found from the equations (\(N=m(g+a)\) in a lift); tension uniform in a light string, varying in a heavy one; ideal pulleys keep T; springs \(-kx\), series and parallel, continuous in time.

Systems. System equation for the common acceleration, single-body equations for internal forces; Atwood \(a=(m_1-m_2)g/(m_1+m_2)\); constraints from string length and contact; inclines \(g\sin\theta\); free wedges need both bodies’ equations.

Accelerating frames. Add \(-m\vec A\); everything behaves as if \(\vec g_{\text{eff}}=\vec g-\vec A\).

Formula sheet

The complete formula sheet is the formula reference table; derivations are on the formula cards.

Choosing the method

If the problem has…Do this first
Bodies at rest or in uniform motionEquilibrium in components; Lami for three forces
Several bodies moving togetherSystem for a, one body for each internal force
Pulleys that move, strings at angles, wedgesConstraint relation before the force equations
A short violent contactImpulse = Δp
Mass flowing in or out\(d\vec p/dt\) of the stream
A lift or accelerating vehicleEffective gravity g + A, or pseudo force
“Just after the string is cut”Spring forces unchanged, string forces zero
Table R1 · Method selection.

The 30 most important facts

  1. A force is an interaction: by one body on another.
  2. Forces add as vectors: \(|F_1-F_2|\le R\le F_1+F_2\).
  3. Resolve along axes chosen to fit the motion.
  4. Draw one FBD per body, only forces on that body.
  5. Zero net force means constant velocity, not necessarily rest.
  6. Mass measures inertia; weight is a force.
  7. Inertial frames move uniformly relative to each other.
  8. Three balancing forces form a closed triangle (Lami).
  9. \(\vec F=d\vec p/dt\); \(\vec F=m\vec a\) for constant mass.
  10. \(\vec a\) is parallel to the net force, not to the velocity.
  11. Impulse is the area under F–t and equals Δp.
  12. Smooth-wall rebound: \(\Delta p=2mv\cos\theta\).
  13. Belt at constant speed: \(F=v\,dm/dt\).
  14. Jet stopped by a wall: \(F=\rho Av^2\).
  15. Action and reaction act on different bodies and never cancel in one FBD.
  16. Internal forces cannot change a system’s momentum.
  17. Recoil: \(MV=mv\); energies in ratio m/M.
  18. The normal force is found, not assumed: N = m(g + a) in a lift.
  19. Free fall: apparent weight zero.
  20. A light string has the same tension everywhere.
  21. In a heavy rope, T = (mass beyond the cut) × a (plus weight below for vertical ropes).
  22. An ideal pulley keeps T; its clamp feels \(2T\cos(\theta/2)\).
  23. Springs: series soften, parallel stiffen; a piece of length ℓ has \(kL/\ell\).
  24. A spring force cannot change instantly.
  25. Contact force between pushed blocks: \(m_2F/(m_1+m_2)\).
  26. Atwood: \(a=(m_1-m_2)g/(m_1+m_2)\), T between the weights.
  27. Movable pulley: the free end moves twice as far.
  28. Smooth incline: \(a=g\sin\theta\); final speed \(\sqrt{2gh}\).
  29. Block at rest on a pushed wedge: \(a=g\tan\theta\).
  30. Pseudo force \(-m\vec A\) only in the accelerating frame.

Common JEE traps

  • N and mg called a third-law pair; N assumed equal to mg.
  • Tension in an Atwood machine taken as a weight, or as the weight difference.
  • Equal accelerations assumed in movable-pulley systems.
  • v = u cos θ instead of u = v cos θ for a string at an angle.
  • Momentum change in a rebound taken as mv instead of 2mv cos θ.
  • Pseudo forces mixed into ground-frame equations.
  • Spring force dropped “just after cutting”.
  • N = mg cos θ used for a moving wedge.

Mixed-level practice test

Time: 45 minutes. Marking: single correct +4/−1; multiple correct +4 if exactly right, +1 per correct option if no wrong option is chosen, −2 if any wrong option is chosen; numerical +4/0. Maximum 48. g = 10 m/s².

QM.1L1Numerical · second law · +4/0

A 15 N net force acts on a 3 kg body. Its acceleration in m/s² is

Solution
5.
QM.2L1Single correct · units · +4/−1

The SI unit of impulse is

(A) N(B) N·s(C) N/s(D) J
Solution
(B).
QM.3L1Numerical · weight · +4/0

The weight in newtons of a 5 kg body on a planet where g = 4 m/s² is

Solution
20.
QM.4L2Numerical · Atwood · +4/0

Masses of 7 kg and 3 kg hang over an ideal pulley. The acceleration in m/s² is

Solution
\(4/10\times10=\) 4.
QM.5L2Numerical · lift · +4/0

A 40 kg girl in a lift accelerating upward at 1.5 m/s² reads, on a scale, (in N)

Solution
\(40(11.5)=\) 460.
QM.6L2Multiple correct · third law · +4/+1/−2

For an action–reaction pair, which are true?

(A) Equal magnitudes(B) Same kind of force(C) Act on the same body(D) Act simultaneously
Solution
(A), (B), (D).
QM.7L3Numerical · incline · +4/0

A 2 kg block on a smooth 30° incline is pulled up the slope by a 20 N string parallel to it. Its acceleration in m/s² is

Solution
\((20-10)/2=\) 5.
QM.8L3Numerical · springs · +4/0

Two springs of 200 N/m each are joined in series and hold a 3 kg load. The extension in m is

Solution
k = 100 N/m: 0.3.
QM.9L3Numerical · pendulum · +4/0

A pendulum in an accelerating car hangs at 30° to the vertical. The car’s acceleration in m/s² (2 decimals) is

Solution
\(10\tan30^\circ=\) 5.77.
QM.10L4Numerical · constraint · +4/0

In Figure 9.1, the free end B is pulled down at 4 m/s. The speed of A in m/s is

Solution
2 (upward).
QM.11L4Numerical · falling rope · +4/0

A uniform 3 kg rope 1.5 m long is released from rest hanging with its lower end touching a table. The force on the table in N when 0.5 m has fallen is

Solution
\(3\lambda gx=3(2)(10)(0.5)=\) 30.
QM.12L4Numerical · pushed wedge · +4/0

A 2 kg block stays at rest on the smooth 45° face of a wedge pushed horizontally. The normal force in N (1 decimal) is

Solution
\(mg/\cos45^\circ=\) 28.3.

Level 5 challenge test

Time: 60 minutes. Six questions, 10 marks each (method 6, answer 4). Pass mark 40/60.

QC.1L5Free wedge · 10 marks

A 1 kg block slides down the smooth 45° face of a 1 kg wedge on a smooth floor. Find the wedge’s acceleration, the block’s acceleration relative to the wedge and the normal force.

Solution
\(A=\dfrac{10(0.5)}{1.5}=\) 3.33 m/s²; \(a_r=\dfrac{2(10)(0.707)}{1.5}=\) 9.43 m/s²; \(N=\dfrac{10(0.707)}{1.5}=\) 4.71 N.
QC.2L5Movable pulley · 10 marks

In Figure 9.2, \(m_1=2\) kg (on the movable pulley) and \(m_2=3\) kg (free end). Find both accelerations and the tension.

Solution
\(a_1=\dfrac{(6-2)10}{2+12}=\) 2.86 m/s² up; \(m_2\) 5.71 m/s² down; \(T=\dfrac{3(2)(3)(10)}{14}=\) 12.9 N.
QC.3L5Atwood in a lift · 10 marks

An Atwood machine (5 kg and 3 kg) hangs in a lift accelerating downward at 4 m/s². Find the relative acceleration and the tension.

Solution
\(g_{\text{eff}}=6\): \(a_r=\tfrac28(6)=\) 1.5 m/s²; \(T=\dfrac{2(15)}{8}(6)=\) 22.5 N.
QC.4L5Heavy rope · 10 marks

A uniform rope of mass 6 kg and length 3 m, lying on a smooth floor, pulls a 4 kg block; the free end is pulled with 50 N. Find the tension 1 m from the free end.

Solution
a = 50/10 = 5 m/s²; beyond the cut: 4 kg of rope + 4 kg block: 40 N.
QC.5L5Variable mass · 10 marks

A 10 kg open cart runs at 4 m/s on a smooth level track while rain falls vertically into it at 0.5 kg/s. (a) What force keeps its speed constant? (b) If no force acts, what is its speed when its mass is 20 kg?

Solution
(a) \(v\,dm/dt=4(0.5)=\) 2 N. (b) Horizontal momentum conserved: \(10(4)=20v\Rightarrow\) 2 m/s.
QC.6L5Spring-joined blocks · 10 marks

Blocks of 2 kg and 3 kg on a smooth floor are joined by a light spring; a 25 N force pulls the 3 kg block. Find the 3 kg block’s acceleration at the instant the 2 kg block accelerates at 3 m/s², and the spring force when the accelerations are equal.

Solution
Spring force 6 N: \((25-6)/3=\) 6.33 m/s². Equal: a = 5 m/s², spring force \(2\times5=\) 10 N.

Self-assessment checklist

Tick what you can do without looking. Ticks are saved in this browser only.

Chapter mastery roadmap

StageStudyPractiseMove on when
1 Force and the lawsCh 1–4Exercises 1–4Every FBD you draw is complete and correct
2 The common forcesCh 5–7Exercises 5–7You never assume N = mg or uniform tension in a rope
3 SystemsCh 8–9Exercises 8–9You write the constraint before the force equations
4 Inclines and framesCh 10–11Exercises 10–11You choose between ground and accelerating frames deliberately
5 MasteryCh 12–13, formula cardsL5 bank, both tests36/48 and 40/60