JEE Physics: Mechanics: Centre of Mass

Centre of Mass for JEE

How this textbook is organised

Read the chapters in order. Every heading opens with the basic idea in plain words, every result is derived step by step with a figure, and every solved example has a detailed solution. Each chapter ends with a graded exercise; every question carries a level tag (L1 to L5) and a full solution. The question bank by level lists every question so you can practise one level at a time.

PartChaptersWhat you gain
Locating the centre of mass1 Systems of particles · 2 Rods, rings and plates · 3 Solids and cavitiesWeighted averages, composite bodies, integration for rods, arcs, sectors and triangles, cones and hemispheres, the negative-mass method
Motion of the centre of mass4 Motion of the CM · 5 Conservation of momentumP = Mv_cm, F_ext = Ma_cm, explosions in flight; recoil, people on boats, free wedges, relative velocities
Impacts and collisions6 Impulse · 7 Collisions in one dimension · 8 Collisions in two dimensionsImpulse–momentum, ballistic pendulum, string jerks; restitution, energy loss, bouncing; oblique impacts, the 90° rule
Energy and variable mass9 The CM frame · 10 Variable massK = ½Mv_cm² + ½μv_rel², spring-coupled bodies; rockets, belts, falling chains
Mastery11 Techniques and common mistakes · 12 Extended practiceMethod choice, 20 traps, further graded questions
Reference and testsFormula derivations · Comparison tables · Question bank · Revision guide and testsFormula sheet, summary, mixed test, Level 5 challenge test with marking schemes

Every question is original; none is labelled as a previous-year JEE question. Take \(g=10\ \text{m/s}^2\) unless stated otherwise, and sin 37° = 0.6, cos 37° = 0.8.

Objectives and prerequisites

After this unit you should be able to

  1. Locate the centre of mass of particle systems, composite bodies, rods, arcs, plates, solids and bodies with cavities.
  2. Use P = Mv_cm and F_ext = Ma_cm, including for explosions in flight.
  3. Apply conservation of momentum, in full or along one direction, with relative velocities.
  4. Solve displacement problems with a stationary centre of mass (boats, planks, wedges).
  5. Use impulse and the impulse–momentum theorem, including impulsive tension.
  6. Solve one- and two-dimensional collisions with any coefficient of restitution.
  7. Work in the CM frame and use the reduced mass for energy and oscillations.
  8. Analyse rockets, conveyor belts and falling chains.

What you need before starting

TopicWhat exactlyUsed first in
VectorsComponents, additionCh 1, Ch 8
CalculusDefinite integrals; differentiationCh 2, Ch 4
Newton’s lawsSecond and third lawsCh 4
Projectile motionRange, time of flightCh 4, Ch 8
Work and energyKinetic energy, springs, energy conservationCh 6, Ch 7, Ch 9
Simple harmonic motionω = √(k/m)Ch 9

Diagnostic test

Ten questions, 20 minutes. 8–10: start at Chapter 1 and move quickly. 5–7: revise the named topic first. Below 5: revise Newton’s laws and energy.

D1Weighted average

Marks of 60 (weight 2) and 90 (weight 1): find the weighted average.

Answer
70.
D2Vectors

Find the magnitude of (3, 4).

Answer
5.
D3Integration

Evaluate \(\int_0^2x^2\,dx\).

Answer
8/3.
D4Second law

A 12 N net force acts on 3 kg. Find a.

Answer
4 m/s².
D5Third law

A pushes B with 5 N. With what force does B push A?

Answer
5 N, opposite.
D6Projectile

Find the range of a projectile at 20 m/s and 45°.

Answer
40 m.
D7Kinetic energy

Find the kinetic energy of 2 kg at 3 m/s.

Answer
9 J.
D8Free fall

Find the speed after falling 5 m from rest.

Answer
10 m/s.
D9Spring energy

Energy in a spring of constant 200 N/m compressed 0.1 m?

Answer
1 J.
D10Logarithms

Find ln e².

Answer
2.

Chapter 1 · Centre of mass of a system of particles

1.1 Two particles

The basic idea

A system of many particles moves in a complicated way, yet one special point of it moves very simply: the centre of mass (CM). It is the mass-weighted average position of the particles. For two particles it lies on the line joining them, closer to the heavier one — a seesaw balances when the pivot is at the CM of the two children. Its position depends only on the masses and their positions, not on the choice of origin (shifting the origin shifts the CM by the same amount).

Derivation 1.1 · Position of the CM of two particles
  1. Masses \(m_1\) at \(x_1\) and \(m_2\) at \(x_2\) on the x axis (Figure 1.1).
  2. Definition (mass-weighted average): \(x_{\text{cm}}=\dfrac{m_1x_1+m_2x_2}{m_1+m_2}\).
  3. Distances from the CM: \(r_1=x_{\text{cm}}-x_1=\dfrac{m_2(x_2-x_1)}{m_1+m_2}\), \(r_2=x_2-x_{\text{cm}}=\dfrac{m_1(x_2-x_1)}{m_1+m_2}\).
  4. So \(m_1r_1=m_2r_2\): the CM divides the joining line in the inverse ratio of the masses, \(r_1:r_2=m_2:m_1\).
  5. Equal masses: the midpoint. If \(m_2\gg m_1\): the CM is almost at \(m_2\).
\[ \begin{gathered} x_{\text{cm}}=\frac{m_1x_1+m_2x_2}{m_1+m_2} \\[4pt] m_1r_1=m_2r_2 \\[4pt] r_1=\frac{m_2d}{m_1+m_2} \end{gathered} \]
m₁ = 2 kgm₂ = 3 kgCMr₁ = 3r₂ = 2m₁r₁ = m₂r₂

Figure 1.1 · Derivation 1.1 (Example 1.1, scale 2 units = 1 m). The centre of mass divides the line joining the masses in the inverse ratio of the masses: m₁r₁ = m₂r₂, so it lies nearer the heavier mass.

1.2 Many particles in two or three dimensions

The basic idea

For any number of particles the CM is again the mass-weighted average position, now as a vector. In practice we work one coordinate at a time: the x coordinate of the CM uses only the x coordinates of the particles, and similarly for y and z. Choosing the origin at one of the particles, or along a symmetry line, saves arithmetic. A system symmetric about a line or plane has its CM on that line or plane.

Derivation 1.2 · CM of n particles
  1. Particles \(m_i\) at \(\vec r_i=(x_i,y_i,z_i)\); total mass \(M=\sum m_i\) (Figure 1.2).
  2. \(\vec r_{\text{cm}}=\dfrac{\sum m_i\vec r_i}{M}\), i.e. \(x_{\text{cm}}=\dfrac{\sum m_ix_i}{M}\), \(y_{\text{cm}}=\dfrac{\sum m_iy_i}{M}\), \(z_{\text{cm}}=\dfrac{\sum m_iz_i}{M}\).
  3. Origin independence: with \(\vec r_i’=\vec r_i-\vec a\), \(\vec r_{\text{cm}}’=\vec r_{\text{cm}}-\vec a\): the same physical point.
  4. Equivalent statement: \(\sum m_i(\vec r_i-\vec r_{\text{cm}})=0\) — the mass-weighted positions relative to the CM add to zero.
\[ \begin{gathered} \vec r_{\text{cm}}=\frac{\sum_im_i\vec r_i}{\sum_im_i} \\[4pt] \sum_im_i(\vec r_i-\vec r_{\text{cm}})=0 \end{gathered} \]
x (m)y (m)1 kg2 kg (4, 0)3 kg (0, 6)CM (1.33, 3)

Figure 1.2 · Derivation 1.2 (Example 1.2). Each coordinate of the centre of mass is the mass-weighted average of that coordinate: x_cm = Σmx/M, y_cm = Σmy/M. The heaviest mass pulls the CM toward itself.

1.3 Composite bodies

The basic idea

A body made of simple parts — rods, rectangles, discs — need not be broken into particles. Each part can be replaced by a single particle carrying the whole mass of that part, placed at the part’s own CM. The CM of the body is then the CM of these few “particles”. For uniform plates the masses are proportional to the areas, so areas can be used directly.

Derivation 1.3 · Grouping: a body as a few point masses
  1. Split the particles into groups A and B with masses \(M_A\), \(M_B\) and CMs \(\vec r_A\), \(\vec r_B\) (Figure 1.3).
  2. \(\sum_{\text{all}}m_i\vec r_i=\sum_Am_i\vec r_i+\sum_Bm_i\vec r_i=M_A\vec r_A+M_B\vec r_B\).
  3. So \(\vec r_{\text{cm}}=\dfrac{M_A\vec r_A+M_B\vec r_B}{M_A+M_B}\): each group acts as a point mass at its own CM.
  4. L-shaped plate of Example 1.4: rectangles of area 4 (CM (2, 0.5)) and 3 (CM (0.5, 2.5)) give (1.357, 1.357).
\[ \vec r_{\text{cm}}=\frac{\sum_kM_k\vec r_k}{\sum_kM_k}\quad(\text{parts }k\text{ at their own CMs}) . \]
A: area 4B: area 3CMsymmetry line y = x

Figure 1.3 · Derivation 1.3 (Example 1.4). Each rectangle is replaced by a point mass (∝ area) at its own centre. The CM of the plate lies on the line joining these two points, at (1.36, 1.36) m — outside the material, on the symmetry line.

1.4 How the CM shifts when a mass is moved, added or removed

The basic idea

Moving one particle of mass m through a displacement Δr moves the CM of the whole system by \(m\Delta\vec r/M\) — a fraction m/M of the particle’s own displacement. Adding a mass pulls the CM toward it; removing a mass pushes the CM away from where it was. Removing a mass is the same as adding a negative mass at that place, an idea we use for bodies with holes in Chapter 3.

Derivation 1.4 · Shift of the CM
  1. Moving particle j by \(\Delta\vec r_j\): \(\Delta(\sum m_i\vec r_i)=m_j\Delta\vec r_j\Rightarrow\Delta\vec r_{\text{cm}}=\dfrac{m_j\Delta\vec r_j}{M}\) (Figure 1.4).
  2. Several moved: \(\Delta\vec r_{\text{cm}}=\dfrac{\sum m_i\Delta\vec r_i}{M}\).
  3. Adding m at \(\vec r\): \(\vec r_{\text{cm}}’=\dfrac{M\vec r_{\text{cm}}+m\vec r}{M+m}\).
  4. Removing m from \(\vec r\): \(\vec r_{\text{cm}}’=\dfrac{M\vec r_{\text{cm}}-m\vec r}{M-m}\) (a negative mass at \(\vec r\)).
\[ \begin{gathered} \Delta\vec r_{\text{cm}}=\frac{\sum m_i\Delta\vec r_i}{M} \\[4pt] \text{removing }m:\ \vec r_{\text{cm}}’=\frac{M\vec r_{\text{cm}}-m\vec r}{M-m} \end{gathered} \]
1 kg2 kg3 kg4 kg+4 kg addedbefore (0.5, 0.7) mafter: centreΔrcm = Σ m Δr / M

Figure 1.4 · Derivation 1.4 (Example 1.6, scale 4 units = 1 m). The CM of the four corner masses is above the centre. A 4 kg mass added at the middle of the bottom side pulls it down to the centre without moving it sideways.

Solved examples 1.1–1.6

Example 1.1

L1 Foundation
Problem
Masses of 2 kg and 3 kg are placed at x = 0 and x = 5 m. Find the centre of mass and its distances from the two masses.
Concepts tested
CM of two particles
Given
\(m_1=2\) kg at 0, \(m_2=3\) kg at 5 m
To find
\(x_{\text{cm}}\), \(r_1\), \(r_2\)
Diagram or graph
Figure 1.1
Sign convention
+x positive
Method
Derivation 1.1.
Detailed solution
  1. \(x_{\text{cm}}=\dfrac{2(0)+3(5)}{5}=3\) m.
  2. \(r_1=3\) m, \(r_2=2\) m.
  3. Check: \(m_1r_1=6=m_2r_2\) ✓.
Justification
Derivation 1.1
Calculation
3 m; 3 m and 2 m
Answer
3 m from the 2 kg mass (2 m from the 3 kg mass)
Interpretation
The CM is closer to the heavier mass.
Alternative method
—
Common trap
Taking the midpoint (2.5 m).
Recognise it
Two masses on a line.

Example 1.2

L2 Basic application
Problem
Masses of 1 kg, 2 kg and 3 kg are placed at (0, 0), (4, 0) and (0, 6) m. Find the centre of mass.
Concepts tested
CM in two dimensions
Given
(1 kg; 0, 0), (2 kg; 4, 0), (3 kg; 0, 6)
To find
\((x_{\text{cm}},y_{\text{cm}})\)
Diagram or graph
Figure 1.2
Sign convention
—
Method
One coordinate at a time.
Detailed solution
  1. M = 6 kg.
  2. \(x_{\text{cm}}=\dfrac{1(0)+2(4)+3(0)}{6}=1.33\) m.
  3. \(y_{\text{cm}}=\dfrac{1(0)+2(0)+3(6)}{6}=3\) m.
Justification
Derivation 1.2
Calculation
(1.33, 3) m
Answer
(1.33 m, 3 m)
Interpretation
The CM lies inside the triangle, closest to the 3 kg mass.
Alternative method
—
Common trap
Dividing by 3 (the number of particles) instead of the total mass.
Recognise it
Masses at given coordinates.

Example 1.3

L2 Basic application
Problem
Masses m, m and 2m are placed at the corners of an equilateral triangle of side 2 m, the 2m mass at the top corner. Find the CM relative to the left corner.
Concepts tested
Symmetry plus weighted average
Given
Corners (0, 0), (2, 0), (1, √3) m with masses m, m, 2m
To find
CM
Diagram or graph
Figure 1.2
Sign convention
—
Method
Symmetry fixes x; compute y.
Detailed solution
  1. Symmetric about x = 1: \(x_{\text{cm}}=1\) m (check: \((0+2m+2m)/4m=1\)).
  2. \(y_{\text{cm}}=\dfrac{2m\sqrt3}{4m}=\dfrac{\sqrt3}{2}=0.866\) m.
Justification
Derivation 1.2
Calculation
(1, 0.866) m
Answer
(1 m, 0.866 m) — halfway up the median from the base
Interpretation
With equal masses it would be at height √3/3 = 0.577 m (the centroid); the heavy top mass lifts it.
Alternative method
—
Common trap
Ignoring the symmetry and making an arithmetic slip in x.
Recognise it
Symmetric arrangement with one unequal mass.

Example 1.4

L3 JEE Main
Problem
A uniform L-shaped plate is made of a 4 m × 1 m rectangle along the x axis (0 ≤ x ≤ 4, 0 ≤ y ≤ 1) and a 1 m × 3 m rectangle on top of its left end (0 ≤ x ≤ 1, 1 ≤ y ≤ 4). Find its CM.
Concepts tested
Composite body
Given
Rectangles of areas 4 m² and 3 m²
To find
CM
Diagram or graph
Figure 1.3
Sign convention
—
Method
Derivation 1.3 with masses ∝ areas.
Detailed solution
  1. Part A: area 4, CM (2, 0.5). Part B: area 3, CM (0.5, 2.5).
  2. \(x_{\text{cm}}=\dfrac{4(2)+3(0.5)}{7}=\dfrac{9.5}{7}=1.357\) m.
  3. \(y_{\text{cm}}=\dfrac{4(0.5)+3(2.5)}{7}=\dfrac{9.5}{7}=1.357\) m.
Justification
Derivation 1.3
Calculation
(1.357, 1.357) m
Answer
(1.36 m, 1.36 m)
Interpretation
The plate is symmetric about the line y = x, so equal coordinates are expected — and the CM lies outside the material.
Alternative method
—
Common trap
Overlapping the rectangles (counting the corner square twice).
Recognise it
Plate made of rectangles.

Example 1.5

L3 JEE Main
Problem
In a water molecule each O–H bond is 0.96 Å long and the H–O–H angle is 104.5°. Taking masses 16 u (O) and 1 u (H), find the distance of the CM from the oxygen atom.
Concepts tested
CM on a symmetry axis
Given
d = 0.96 Å, angle 104.5°, masses 16, 1, 1
To find
Distance of the CM from O
Sign convention
Along the bisector, toward the H atoms
Method
Each H is \(d\cos52.25^\circ\) along the bisector.
Detailed solution
  1. Component of each O–H bond along the bisector: \(0.96\cos52.25^\circ=0.96\times0.6122=0.5877\) Å.
  2. Perpendicular components cancel by symmetry.
  3. \(r_{\text{cm}}=\dfrac{2(1)(0.5877)}{18}=0.0653\) Å.
Justification
Derivation 1.2
Calculation
0.0653 Å
Answer
0.065 Å from O along the bisector
Interpretation
The heavy oxygen keeps the CM very close to itself.
Alternative method
—
Common trap
Using the full bond length along the bisector.
Recognise it
Symmetric molecule.

Example 1.6

L4 Advanced
Problem
Masses 1, 2, 3 and 4 kg sit at the corners A(0, 0), B(1, 0), C(1, 1), D(0, 1) m of a square. Find the CM. What mass must be added at the midpoint of AB to bring the CM to the centre of the square?
Concepts tested
Shift of the CM by adding mass
Given
Masses at the four corners; added mass m at (0.5, 0)
To find
CM; m
Diagram or graph
Figure 1.4
Sign convention
—
Method
Compute the CM; then demand \(y_{\text{cm}}=0.5\).
Detailed solution
  1. M = 10 kg. \(x_{\text{cm}}=\dfrac{2+3}{10}=0.5\) m; \(y_{\text{cm}}=\dfrac{3+4}{10}=0.7\) m.
  2. Adding m at (0.5, 0) leaves \(x_{\text{cm}}=0.5\) and gives \(y_{\text{cm}}=\dfrac{7}{10+m}\).
  3. \(\dfrac{7}{10+m}=0.5\Rightarrow m=4\) kg.
Justification
Derivation 1.4
Calculation
(0.5, 0.7) m; 4 kg
Answer
CM at (0.5 m, 0.7 m); add 4 kg
Interpretation
The added mass is placed on the axis x = 0.5 so that it does not disturb the x coordinate.
Why this method
Work only with the coordinate that must change.
Common trap
Placing the added mass at a corner, which spoils x.
Recognise it
“What mass must be added so that the CM is at …”.

Exercise 1

Q1.1L1Single correct · two equal masses · 1 min

The centre of mass of two equal point masses lies

(A) at the first mass(B) at the midpoint of the line joining them(C) outside the line(D) nearer the second mass
Solution
(B).
Q1.2L1Numerical · two masses · 1 min

A 1 kg mass is at x = 0 and a 4 kg mass at x = 5 m. Find \(x_{\text{cm}}\).

Solution
4 m.
Q1.3L2Numerical · three masses · 1 min

Masses of 2, 2 and 4 kg are at (0, 0), (3, 0) and (0, 4) m. Find the CM.

Solution
(0.75 m, 2 m).
Q1.4L2Numerical · Earth–Moon · 1 min

The Earth’s mass is 81 times the Moon’s and their centres are 3.84 × 10⁵ km apart. How far from the Earth’s centre is their CM?

Solution
\(3.84\times10^5/82=\) 4.68 × 10³ km (inside the Earth).
Q1.5L3Numerical · three rods · 2 min

Three identical uniform rods of length 1.5 m form a U: a horizontal base with two vertical sides of equal length rising from its ends. Find the height of the CM above the base.

Solution
\(\dfrac{0+0.75+0.75}{3}=\) 0.5 m, on the vertical line through the middle of the base.
Q1.6L3Numerical · triangle · 2 min

Masses of 1, 2 and 3 kg sit at A(0, 0), B(1, 0) and C(0.5, 0.866) m (an equilateral triangle). Find the CM.

Solution
\(x=(2+1.5)/6=\) 0.583 m, \(y=3(0.866)/6=\) 0.433 m.
Q1.7L4Numerical · moving one mass · 2 min

A system of total mass 10 kg has its CM at the origin. A 2 kg part of it is moved from (1, 0) to (1, 5) m. Where is the CM now?

Solution
\(\Delta\vec r_{\text{cm}}=2(0,5)/10\): (0, 1) m.
Q1.8L5Numerical · one mass missing · 2 min

Equal masses m are placed at five of the six corners of a regular hexagon of side 0.5 m. How far from the centre of the hexagon is their CM, and in which direction?

Solution
Full hexagon: CM at the centre. Removing one mass = adding −m at that corner: \(r=\dfrac{m(0.5)}{5m}=\) 0.1 m, on the side away from the empty corner.

Chapter 2 · Centre of mass of continuous bodies: rods, rings and plates

2.1 From sums to integrals; the uniform rod

The basic idea

A rod, a ring or a plate contains so many particles that the sum \(\sum m_ix_i\) becomes an integral. Cut the body into small elements of mass dm at position x, and add up \(x\,dm\). The art lies in choosing the element so that every point of it has (nearly) the same coordinate: thin slices across a rod, short arcs of a ring, thin strips or rings of a plate. For a uniform body, symmetry often gives the answer without any integration: a uniform rod has its CM at its middle.

Derivation 2.1 · CM as an integral; uniform rod
  1. \(\vec r_{\text{cm}}=\dfrac{\int\vec r\,dm}{\int dm}\); in one dimension \(x_{\text{cm}}=\dfrac{\int x\,dm}{M}\) (Figure 2.1).
  2. Rod of length L along the x axis from 0 to L with mass per unit length λ (possibly varying): \(dm=\lambda\,dx\).
  3. Uniform rod, λ = M/L: \(x_{\text{cm}}=\dfrac{1}{M}\displaystyle\int_0^Lx\frac ML\,dx=\frac{1}{L}\cdot\frac{L^2}{2}=\frac L2\).
  4. In general \(x_{\text{cm}}=\dfrac{\int_0^Lx\lambda(x)\,dx}{\int_0^L\lambda(x)\,dx}\).
\[ \begin{gathered} x_{\text{cm}}=\frac{\int x\,dm}{\int dm}=\frac{\int_0^Lx\,\lambda(x)\,dx}{\int_0^L\lambda(x)\,dx} \\[4pt] \text{uniform rod: }\frac L2 \end{gathered} \]
xdm = λ dxCM: L/20L

Figure 2.1 · Derivation 2.1. The rod is cut into elements dm = λ dx at position x; the CM is ∫x dm / ∫dm. For a uniform rod the elements are equally heavy everywhere, so the CM is at the middle.

2.2 Non-uniform rods

The basic idea

If a rod gets denser toward one end, its CM shifts toward that end. With λ = kx (density growing linearly from zero), two-thirds of the way along; with λ ∝ x², three-quarters of the way. The integral formula handles any density law; remember that the denominator is the total mass, which also has to be found by integration.

Derivation 2.2 · Rod with λ = kxⁿ
  1. \(dm=kx^n\,dx\) from 0 to L (Figure 2.2).
  2. \(M=\displaystyle\int_0^Lkx^n\,dx=\frac{kL^{n+1}}{n+1}\).
  3. \(\displaystyle\int_0^Lx\,dm=\frac{kL^{n+2}}{n+2}\).
  4. \(x_{\text{cm}}=\dfrac{n+1}{n+2}L\): n = 0 (uniform) gives L/2; n = 1 gives 2L/3; n = 2 gives 3L/4.
  5. Linear law λ = λ₀(1 + x/L): \(M=\tfrac32\lambda_0L\), \(\int x\,dm=\lambda_0\left(\tfrac{L^2}{2}+\tfrac{L^2}{3}\right)=\tfrac56\lambda_0L^2\), so \(x_{\text{cm}}=\dfrac{5L}{9}\).
\[ \begin{gathered} \lambda=kx^n:\ x_{\text{cm}}=\frac{n+1}{n+2}L \\[4pt] \lambda=\lambda_0\left(1+\frac xL\right):\ x_{\text{cm}}=\frac{5L}{9} \end{gathered} \]
012300.250.50.6670.751x / Lrelative density λuniform: L/21 + x/L: 5L/9∝ x: 2L/3∝ x²: 3L/4

Figure 2.2 · Derivation 2.2. The denser the far end, the further the CM moves toward it. Dots mark the CM of each rod: L/2 (uniform), 5L/9 (λ ∝ 1 + x/L), 2L/3 (λ ∝ x) and 3L/4 (λ ∝ x²).

2.3 Circular arcs and rings

The basic idea

A uniform wire bent into an arc of a circle has its CM on the arc’s line of symmetry, but inside the circle, not on the wire. The more the arc bends round, the closer the CM gets to the centre: a full ring has its CM at the centre itself. Use polar coordinates: each element of the arc is R dθ long and sits at height R cos θ above the centre along the symmetry axis.

Derivation 2.3 · CM of an arc of angle 2α
  1. Arc of radius R from θ = −α to +α, measured from the symmetry axis; λ uniform (Figure 2.3).
  2. Element: \(dm=\lambda R\,d\theta\), at distance \(R\cos\theta\) from the centre along the axis.
  3. \(M=2\lambda R\alpha\); \(\displaystyle\int R\cos\theta\,dm=\lambda R^2\int_{-\alpha}^{\alpha}\cos\theta\,d\theta=2\lambda R^2\sin\alpha\).
  4. \(r_{\text{cm}}=\dfrac{R\sin\alpha}{\alpha}\) from the centre.
  5. Semicircular ring (α = π/2): \(2R/\pi\). Quarter ring (α = π/4): \(2\sqrt2R/\pi\) along the bisector, i.e. \((2R/\pi,\ 2R/\pi)\). Full ring (α = π): 0.
\[ \begin{gathered} r_{\text{cm}}=\frac{R\sin\alpha}{\alpha} \\[4pt] \text{semicircular ring: }\frac{2R}{\pi} \end{gathered} \]
Odm = λR dθθCM: 2R/πheight of dm: R cos θ

Figure 2.3 · Derivation 2.3. Each arc element R dθ sits at height R cos θ (θ from the symmetry axis). Averaging over the arc gives R sin α/α from the centre: 2R/π for a semicircle — inside the circle, not on the wire.

2.4 Discs and sectors

The basic idea

A flat sector (a slice of a disc) can be built from thin arcs of radius r, from r = 0 to R. Each arc has its CM at r sin α/α, but the outer arcs are longer and heavier, so the CM of the sector is nearer the curved edge than the middle. For a semicircular disc it is 4R/3π from the centre — a little closer to the centre than the semicircular ring’s 2R/π, because more of the disc’s mass lies near the straight edge.

Derivation 2.4 · CM of a sector of angle 2α
  1. Sector of radius R, angle 2α; surface density σ (Figure 2.4). Element: a thin arc of radius r and width dr.
  2. Its mass: \(dm=\sigma(2\alpha r)\,dr\); its CM: \(r\sin\alpha/\alpha\) (Derivation 2.3).
  3. \(M=\sigma\alpha R^2\); \(\displaystyle\int\frac{r\sin\alpha}{\alpha}\,dm=2\sigma\sin\alpha\int_0^Rr^2\,dr=\frac{2\sigma R^3\sin\alpha}{3}\).
  4. \(r_{\text{cm}}=\dfrac{2R\sin\alpha}{3\alpha}\).
  5. Semicircular disc (α = π/2): \(\dfrac{4R}{3\pi}\). Quarter disc: \((4R/3\pi,\ 4R/3\pi)\).
\[ \begin{gathered} r_{\text{cm}}=\frac{2R\sin\alpha}{3\alpha} \\[4pt] \text{semicircular disc: }\frac{4R}{3\pi} \end{gathered} \]
drOCM: 4R/3πring r: mass ∝ r dr, CM at 2r/π

Figure 2.4 · Derivation 2.4. A semicircular disc is a stack of thin semicircular rings. A ring of radius r has mass ∝ r dr and its CM at 2r/π; weighting by mass gives 4R/3π for the disc.

2.5 Triangular plates

The basic idea

Slice a uniform triangular plate into thin strips parallel to one side. Each strip balances at its midpoint, and all the midpoints lie on the median to that side. So the CM is on every median — at the point where the medians meet, the centroid, one-third of the way up each median from the side. In coordinates it is simply the average of the three vertices.

Derivation 2.5 · CM of a triangular plate
  1. Triangle with base b on the x axis and apex at height h (Figure 2.5). A strip at height y has width \(b(1-y/h)\).
  2. \(dm\propto b(1-y/h)\,dy\); \(M\propto\displaystyle\int_0^hb\left(1-\frac yh\right)dy=\frac{bh}{2}\).
  3. \(\displaystyle\int y\,dm\propto b\int_0^h\left(y-\frac{y^2}{h}\right)dy=\frac{bh^2}{6}\).
  4. \(y_{\text{cm}}=\dfrac{bh^2/6}{bh/2}=\dfrac h3\) above the base; by the median argument it is on every median, so \(\vec r_{\text{cm}}=\tfrac13(\vec r_A+\vec r_B+\vec r_C)\).
\[ \begin{gathered} y_{\text{cm}}=\frac h3\ \text{(above the base)} \\[4pt] \vec r_{\text{cm}}=\frac{\vec r_A+\vec r_B+\vec r_C}{3} \end{gathered} \]
strip: width b(1 − y/h)centroidh/3b

Figure 2.5 · Derivation 2.5. Strips parallel to the base balance at their midpoints, which all lie on the median (dashed). Integrating the strips gives the CM at h/3 above the base — the centroid, where the medians meet.

Solved examples 2.1–2.6

Example 2.1

L2 Basic application
Problem
A rod 2 m long lies along the x axis from x = 0. Its mass per unit length is λ = (2 + 3x) kg/m. Find its mass and the position of its CM.
Concepts tested
Non-uniform rod
Given
λ = 2 + 3x, L = 2 m
To find
M, \(x_{\text{cm}}\)
Diagram or graph
Figure 2.2
Sign convention
—
Method
Derivation 2.1.
Detailed solution
  1. \(M=\displaystyle\int_0^2(2+3x)\,dx=4+6=10\) kg.
  2. \(\displaystyle\int_0^2x(2+3x)\,dx=\big[x^2+x^3\big]_0^2=4+8=12\) kg m.
  3. \(x_{\text{cm}}=12/10=1.2\) m.
Justification
Derivation 2.1
Calculation
10 kg; 1.2 m
Answer
10 kg; 1.2 m from the light end
Interpretation
Beyond the midpoint, toward the denser end.
Alternative method
—
Common trap
Dividing by the length instead of the mass.
Recognise it
λ given as a function of x.

Example 2.2

L2 Basic application
Problem
Find the CM of a uniform semicircular ring of radius 0.3 m.
Concepts tested
Arc formula
Given
R = 0.3 m, α = π/2
To find
Distance from the centre
Diagram or graph
Figure 2.3
Sign convention
Along the symmetry axis
Method
\(2R/\pi\).
Detailed solution
  1. \(r_{\text{cm}}=\dfrac{2(0.3)}{\pi}=0.191\) m.
Justification
Derivation 2.3
Calculation
0.191 m
Answer
0.191 m from the centre, on the symmetry axis
Interpretation
The CM is in empty space, inside the semicircle.
Alternative method
—
Common trap
Using 4R/3π (that is the disc).
Recognise it
Semicircular wire.

Example 2.3

L3 JEE Main
Problem
Find the CM of a uniform semicircular disc of radius 0.3 m, and compare it with Example 2.2.
Concepts tested
Sector formula
Given
R = 0.3 m
To find
\(r_{\text{cm}}\)
Diagram or graph
Figure 2.4
Sign convention
Along the symmetry axis
Method
\(4R/3\pi\).
Detailed solution
  1. \(r_{\text{cm}}=\dfrac{4(0.3)}{3\pi}=0.127\) m.
  2. Ratio to the ring: \((4/3\pi)/(2/\pi)=2/3\).
Justification
Derivation 2.4
Calculation
0.127 m
Answer
0.127 m from the centre (2/3 of the ring’s value)
Interpretation
Much of a disc’s mass is near the straight edge, so its CM is lower.
Alternative method
Build the disc from semicircular rings of radius r, each with CM at 2r/π, weighted by πr dr.
Common trap
Confusing the ring and disc formulas.
Recognise it
Semicircular plate.

Example 2.4

L3 JEE Main
Problem
A uniform wire is bent into a quarter circle of radius 1 m, from (1, 0) to (0, 1) with its centre at the origin. Find its CM.
Concepts tested
Arc with α = π/4
Given
R = 1 m, 2α = π/2
To find
CM coordinates
Diagram or graph
Figure 2.3
Sign convention
—
Method
\(R\sin\alpha/\alpha\) along the bisector, then resolve.
Detailed solution
  1. \(r=\dfrac{\sin(\pi/4)}{\pi/4}=\dfrac{2\sqrt2}{\pi}=0.900\) m along the 45° line.
  2. Components: \(0.900\cos45^\circ=\dfrac{2}{\pi}=0.637\) m each.
  3. Direct check: \(x_{\text{cm}}=\dfrac{\int_0^{\pi/2}\cos\theta\,d\theta}{\pi/2}=\dfrac{2}{\pi}\) ✓.
Justification
Derivation 2.3
Calculation
(0.637, 0.637) m
Answer
(0.637 m, 0.637 m)
Interpretation
Each coordinate equals that of a semicircular ring — the quarter is half of a semicircle in each direction.
Alternative method
Integrate x = cos θ directly.
Common trap
Using α = π/2 for a quarter circle.
Recognise it
Quarter ring.

Example 2.5

L4 Advanced
Problem
A rod of length 2 m has density λ = λ₀x²/L² (x from one end). Find its CM.
Concepts tested
Power-law rod
Given
λ ∝ x², L = 2 m
To find
\(x_{\text{cm}}\)
Diagram or graph
Figure 2.2
Sign convention
—
Method
Derivation 2.2 with n = 2.
Detailed solution
  1. \(x_{\text{cm}}=\dfrac{n+1}{n+2}L=\dfrac34L\).
  2. \(=1.5\) m.
  3. Check: \(\int_0^2x^3dx/\int_0^2x^2dx=4/(8/3)=1.5\) ✓.
Justification
Derivation 2.2
Calculation
1.5 m
Answer
1.5 m from the light end
Interpretation
λ₀ cancels: only the shape of the density law matters.
Why this method
Remember (n + 1)L/(n + 2) for any power law.
Common trap
Taking the CM where λ is largest (the end).
Recognise it
λ ∝ xⁿ.

Example 2.6

L4 Advanced
Problem
A uniform wire is bent into a closed D shape: a semicircular arc of radius R = 1 m plus the diameter joining its ends. Find the CM.
Concepts tested
Composite of arc and rod
Given
Arc length πR at 2R/π; diameter 2R at the centre
To find
\(y_{\text{cm}}\) from the diameter
Diagram or graph
Figure 2.3
Sign convention
Up (toward the arc) positive
Method
Derivation 1.3 with masses ∝ lengths.
Detailed solution
  1. Arc: length π (mass ∝ π), CM at \(2/\pi\). Diameter: length 2, CM at 0.
  2. \(y_{\text{cm}}=\dfrac{\pi(2/\pi)+2(0)}{\pi+2}=\dfrac{2}{\pi+2}=0.389\) m.
Justification
Derivations 1.3 and 2.3
Calculation
0.389 m
Answer
0.389 m from the diameter, on the symmetry axis
Interpretation
The straight piece pulls the CM down from 0.637 m.
Why this method
Lengths act as masses for a uniform wire.
Common trap
Using areas instead of lengths.
Recognise it
Wire frame made of an arc and a straight piece.

Exercise 2

Q2.1L1Numerical · uniform rod · 1 min

Where is the CM of a uniform rod 2 m long, measured from one end?

Solution
1 m.
Q2.2L1Single correct · semicircular ring · 1 min

The CM of a uniform semicircular ring of radius R is at a distance from the centre of

(A) R/2(B) 2R/π(C) 4R/3π(D) 3R/8
Solution
(B).
Q2.3L2Numerical · λ = kx · 1 min

A rod of length 3 m has λ = kx. Find its CM.

Solution
\(2L/3=\) 2 m.
Q2.4L2Numerical · triangle · 1 min

A uniform triangular plate has height 0.9 m. How far above its base is the CM?

Solution
0.3 m.
Q2.5L3Numerical · semicircular disc · 1 min

Find the CM of a uniform semicircular disc of radius 0.6 m.

Solution
\(4(0.6)/3\pi=\) 0.255 m.
Q2.6L3Numerical · 60° arc · 2 min

A uniform wire forms an arc of radius 1 m subtending 60° at the centre. Find the distance of its CM from the centre.

Solution
α = π/6: \(\dfrac{\sin30^\circ}{\pi/6}=\) 0.955 m.
Q2.7L4Numerical · linear density · 2 min

A rod of length 1.8 m has λ = λ₀(1 + x/L). Find its CM.

Solution
\(5L/9=\) 1.0 m.
Q2.8L5Numerical · sector · 2 min

Find the distance from the centre of the CM of a uniform 60° sector of a disc of radius 0.9 m.

Solution
\(\dfrac{2(0.9)\sin30^\circ}{3(\pi/6)}=\) 0.573 m.

Chapter 3 · Solid bodies and bodies with cavities

3.1 Solid and hollow cones

The basic idea

For a solid with an axis of symmetry the CM lies on the axis, and we only need its height. Slice the body into thin discs perpendicular to the axis: each disc’s mass is its area times its thickness, and its CM is on the axis. A solid cone is wide at the base and narrow at the tip, so most of its mass is low down: its CM is only a quarter of the way up. A hollow cone (just the curved surface) has relatively more mass higher up and its CM is a third of the way up.

Derivation 3.1 · CM of a solid cone
  1. Cone of height h and base radius R, apex at the origin, axis along y (Figure 3.1). A disc at distance y from the apex has radius \(r=Ry/h\).
  2. \(dm=\rho\pi r^2\,dy=\rho\pi\dfrac{R^2}{h^2}y^2\,dy\).
  3. \(y_{\text{cm}}=\dfrac{\int_0^hy\cdot y^2\,dy}{\int_0^hy^2\,dy}=\dfrac{h^4/4}{h^3/3}=\dfrac34h\) from the apex, i.e. \(h/4\) above the base.
  4. Hollow cone: a band at distance y from the apex has area ∝ r dℓ ∝ y dy, so \(y_{\text{cm}}=\dfrac{\int y^2dy}{\int y\,dy}=\dfrac23h\) from the apex: \(h/3\) above the base.
\[ \begin{gathered} \text{solid cone: }\frac h4\ \text{above the base} \\[4pt] \text{hollow cone: }\frac h3\ \text{above the base} \end{gathered} \]
disc: radius Ry/hh/4hapex

Figure 3.1 · Derivation 3.1. A solid cone is a stack of discs whose areas grow as y² from the apex. Most of the mass is near the base, so the CM is only h/4 above it (3h/4 from the apex).

3.2 Solid hemisphere

The basic idea

Slice a solid hemisphere into thin discs parallel to its flat face. The discs near the flat face are wide; those near the top are small. Weighting each disc’s height by its mass puts the CM at 3R/8 above the flat face — below the halfway point.

Derivation 3.2 · CM of a solid hemisphere
  1. Flat face on the xy plane, centre at the origin (Figure 3.2). A disc at height y has radius \(\sqrt{R^2-y^2}\).
  2. \(dm=\rho\pi(R^2-y^2)\,dy\); \(M=\rho\pi\displaystyle\int_0^R(R^2-y^2)dy=\tfrac23\rho\pi R^3\).
  3. \(\displaystyle\int y\,dm=\rho\pi\int_0^R(R^2y-y^3)\,dy=\rho\pi\frac{R^4}{4}\).
  4. \(y_{\text{cm}}=\dfrac{R^4/4}{2R^3/3}=\dfrac{3R}{8}\).
\[ y_{\text{cm}}=\frac{3R}{8}\quad(\text{solid hemisphere, above the flat face}) . \]
disc at y: radius √(R² − y²)3R/8O

Figure 3.2 · Derivation 3.2. Thin discs parallel to the flat face shrink toward the top. Weighting their heights by their masses gives the CM at 3R/8 above the flat face.

3.3 Hollow hemisphere (hemispherical shell)

The basic idea

A thin hemispherical bowl has all its mass on the curved surface. Cut it into thin horizontal bands. A remarkable fact (known to Archimedes) is that bands of equal height have equal area, so the mass is spread uniformly with height. The CM is therefore exactly halfway up: R/2.

Derivation 3.3 · CM of a hemispherical shell
  1. Band between polar angles θ and θ + dθ: radius \(R\sin\theta\), width \(R\,d\theta\), area \(dA=2\pi R^2\sin\theta\,d\theta\), height \(y=R\cos\theta\) (Figure 3.3).
  2. Since \(dy=-R\sin\theta\,d\theta\): \(dA=2\pi R\,|dy|\) — equal area for equal height.
  3. So the mass is uniform in y from 0 to R: \(y_{\text{cm}}=R/2\).
  4. Check by integration: \(\dfrac{\int_0^{\pi/2}R\cos\theta\sin\theta\,d\theta}{\int_0^{\pi/2}\sin\theta\,d\theta}=\dfrac{R/2}{1}=\dfrac R2\) ✓.
\[ y_{\text{cm}}=\frac R2\quad(\text{hemispherical shell}) . \]
equal heights ⇒ equal areasdA = 2πR dyR/2O

Figure 3.3 · Derivation 3.3. A band of the shell at height y has area 2πR dy, the same for every band of equal height. The mass is therefore spread evenly in height, and the CM is halfway up: R/2.

3.4 Bodies with cavities: the negative-mass method

The basic idea

A disc with a hole, a sphere with a cavity: integrating over such shapes is awkward. Instead, think of the body as the complete, solid body plus a piece of negative mass filling the hole. The complete body has its CM at its centre (by symmetry); the “negative” piece has its CM at the centre of the hole. Combining them with Derivation 1.3 gives the answer in one line. The CM moves away from the hole.

Derivation 3.4 · CM of a body with a cavity
  1. Complete body: mass M, CM at the origin. Removed piece: mass m, its CM at distance d from the origin (Figure 3.4).
  2. Remaining body = complete body + (−m) at d: \(x_{\text{cm}}=\dfrac{M(0)-md}{M-m}=-\dfrac{md}{M-m}\).
  3. Uniform plate: masses ∝ areas. Disc of radius R with a hole of radius R/2 touching the rim (d = R/2): \(m/M=1/4\), \(x_{\text{cm}}=-\dfrac{(1/4)(R/2)}{3/4}=-\dfrac R6\).
  4. Uniform sphere: masses ∝ volumes. Sphere R with a cavity of radius R/2 at d = R/2: \(m/M=1/8\), \(x_{\text{cm}}=-\dfrac{(1/8)(R/2)}{7/8}=-\dfrac{R}{14}\).
\[ x_{\text{cm}}=-\frac{m\,d}{M-m}\quad(\text{away from the cavity}) . \]
holeOCM= full disc (M, at O)+ hole as mass −m at dxcm = −md/(M − m)R/2 hole at d = R/2:xcm = −R/6

Figure 3.4 · Derivation 3.4 (Example 3.3). The plate with a hole is the full disc plus a disc of negative mass at the hole. The CM moves away from the hole: by md/(M − m) = R/6 for a hole of radius R/2 touching the rim.

Solved examples 3.1–3.6

Example 3.1

L2 Basic application
Problem
Find the height of the CM of a uniform solid cone of height 0.4 m above its base.
Concepts tested
Solid cone
Given
h = 0.4 m
To find
\(y_{\text{cm}}\) above the base
Diagram or graph
Figure 3.1
Sign convention
—
Method
h/4.
Detailed solution
  1. \(y_{\text{cm}}=0.4/4=0.1\) m above the base (0.3 m below the apex).
Justification
Derivation 3.1
Calculation
0.1 m
Answer
0.1 m above the base
Interpretation
Independent of the base radius.
Alternative method
—
Common trap
h/3 (that is the hollow cone or a triangle).
Recognise it
Solid cone.

Example 3.2

L2 Basic application
Problem
Find the CM of a uniform solid hemisphere of radius 0.16 m.
Concepts tested
Solid hemisphere
Given
R = 0.16 m
To find
\(y_{\text{cm}}\)
Diagram or graph
Figure 3.2
Sign convention
Above the flat face
Method
3R/8.
Detailed solution
  1. \(y_{\text{cm}}=3(0.16)/8=0.06\) m.
Justification
Derivation 3.2
Calculation
0.06 m
Answer
0.06 m above the flat face, on the axis
Interpretation
Compare the shell: 0.08 m.
Alternative method
—
Common trap
R/2 (the shell).
Recognise it
Solid hemisphere.

Example 3.3

L3 JEE Main
Problem
A circular hole of radius R/2 is cut from a uniform disc of radius R = 0.6 m, the hole touching the edge of the disc. Find the CM of the remaining plate.
Concepts tested
Negative mass
Given
R = 0.6 m; hole radius 0.3 m, centre 0.3 m from the disc’s centre
To find
\(x_{\text{cm}}\)
Diagram or graph
Figure 3.4
Sign convention
Toward the hole positive
Method
Derivation 3.4 with areas.
Detailed solution
  1. Areas: disc πR², hole π(R/2)² = πR²/4; take M ∝ 4, m ∝ 1.
  2. \(x_{\text{cm}}=-\dfrac{1\times0.3}{4-1}=-0.1\) m.
Justification
Derivation 3.4
Calculation
−0.1 m
Answer
0.1 m from the centre, on the side away from the hole
Interpretation
R/6 in general.
Alternative method
—
Common trap
Dividing by M instead of M − m.
Recognise it
Plate with a hole.

Example 3.4

L3 JEE Main
Problem
A spherical cavity of radius R/2 is made in a uniform solid sphere of radius R = 0.7 m, the cavity touching the surface. Find the CM of the remaining body.
Concepts tested
Negative mass in three dimensions
Given
R = 0.7 m; cavity radius 0.35 m at d = 0.35 m
To find
CM
Diagram or graph
Figure 3.4
Sign convention
Toward the cavity positive
Method
Derivation 3.4 with volumes (∝ r³).
Detailed solution
  1. Volumes: \(m/M=(1/2)^3=1/8\).
  2. \(x_{\text{cm}}=-\dfrac{(1/8)(0.35)}{7/8}=-0.05\) m.
Justification
Derivation 3.4
Calculation
−0.05 m
Answer
0.05 m from the centre, away from the cavity
Interpretation
R/14: a much smaller shift than for the disc, because the cavity removes only 1/8 of the mass.
Alternative method
—
Common trap
Using areas (1/4) for a solid sphere.
Recognise it
Sphere with a spherical cavity.

Example 3.5

L4 Advanced
Problem
A toy is made of a solid hemisphere of radius R = 0.1 m with a solid cone of the same material and base radius glued to its flat face. What height must the cone have for the CM of the toy to lie exactly at the joining face (so the toy rests in any tilted position)?
Concepts tested
Composite solids
Given
R = 0.1 m; same density
To find
h
Sign convention
Up (toward the cone) positive, origin at the joint
Method
Moments about the joint must cancel.
Detailed solution
  1. Hemisphere: mass ∝ \(\tfrac23\pi R^3\), CM \(3R/8\) below the joint.
  2. Cone: mass ∝ \(\tfrac13\pi R^2h\), CM \(h/4\) above the joint.
  3. Balance: \(\tfrac23R^3\cdot\tfrac{3R}{8}=\tfrac13R^2h\cdot\tfrac h4\Rightarrow\tfrac{R^4}{4}=\tfrac{R^2h^2}{12}\Rightarrow h^2=3R^2\).
  4. \(h=\sqrt3R=0.173\) m.
Justification
Derivations 3.1 and 3.2
Calculation
0.173 m
Answer
h = √3 R = 0.173 m
Interpretation
With a shorter cone the toy rights itself; with a taller one it topples.
Why this method
Set the moments about the joint equal; π and ρ cancel.
Common trap
Using h/3 for a solid cone.
Recognise it
Composite solid “rests in any position” / “neutral equilibrium”.

Example 3.6

L4 Advanced
Problem
A uniform square plate of side 0.6 m has a circular hole of radius 0.1 m whose centre is 0.15 m from the centre of the square. Find the shift of the CM.
Concepts tested
Negative mass with different shapes
Given
Square area 0.36 m²; hole area π(0.1)² m²; d = 0.15 m
To find
Shift of the CM
Diagram or graph
Figure 3.4
Sign convention
Away from the hole
Method
Derivation 3.4.
Detailed solution
  1. Hole area: \(0.031\,42\) m².
  2. \(x_{\text{cm}}=-\dfrac{0.031\,42\times0.15}{0.36-0.031\,42}=-\dfrac{0.004\,712}{0.328\,6}=-0.0143\) m.
Justification
Derivation 3.4
Calculation
1.43 cm
Answer
1.43 cm from the centre, away from the hole
Interpretation
A small hole far from the centre shifts the CM only slightly.
Why this method
Areas stand in for masses for any uniform plate.
Common trap
Using the hole’s radius as d.
Recognise it
Hole of a different shape from the plate.

Exercise 3

Q3.1L1Numerical · solid cone · 1 min

A uniform solid cone is 1.2 m high. How far above its base is its CM?

Solution
0.3 m.
Q3.2L2Numerical · shell · 1 min

Find the CM of a thin hemispherical bowl of radius 0.5 m.

Solution
0.25 m above the rim plane.
Q3.3L2Numerical · hollow cone · 1 min

A hollow cone (curved surface only) is 0.9 m high. How far above its base is its CM?

Solution
0.3 m.
Q3.4L3Numerical · disc with hole · 2 min

A hole of radius 0.5 m is cut from a uniform disc of radius 1 m, touching its edge. Find the shift of the CM.

Solution
\(R/6=\) 0.167 m, away from the hole.
Q3.5L3Numerical · sphere with cavity · 2 min

A sphere of radius 1.4 m has a spherical cavity of radius 0.7 m touching its surface. Find the shift of the CM.

Solution
\(R/14=\) 0.1 m, away from the cavity.
Q3.6L4Numerical · cylinder and hemisphere · 2 min

A solid cylinder of radius 0.2 m stands on a solid hemisphere of the same radius and material. For what height of cylinder is the CM at the joint?

Solution
\(\pi R^2H\cdot\tfrac H2=\tfrac23\pi R^3\cdot\tfrac{3R}{8}\Rightarrow H=R/\sqrt2=\) 0.141 m.
Q3.7L4Numerical · off-centre hole · 2 min

A uniform disc of radius 0.4 m has a hole of radius 0.1 m whose centre is 0.2 m from the disc’s centre. Find the shift of the CM.

Solution
\(\dfrac{0.01\times0.2}{0.16-0.01}=\) 0.0133 m, away from the hole.
Q3.8L5Numerical · frustum · 3 min

A frustum of a solid cone has base radii R = 2r (bottom) and r (top) and height 0.28 m. Find the height of its CM above the larger base.

Solution
Full cone of height 2h minus the top cone of height h (volume 1/8): \(y=\dfrac{1\cdot\tfrac{2h}{4}-\tfrac18\left(h+\tfrac h4\right)}{1-\tfrac18}=\dfrac{11h}{28}=\) 0.11 m.

Chapter 4 · Motion of the centre of mass

4.1 Velocity of the CM and total momentum

The basic idea

Differentiate the definition of the CM with respect to time and the velocity of the CM appears as the mass-weighted average velocity of the particles. Multiply by the total mass and you get the total momentum. So the whole system carries momentum exactly as if all its mass were concentrated at the CM and moved with it: \(\vec P=M\vec v_{\text{cm}}\). This is why the CM is so useful: the messy internal motion is hidden, and only the CM’s motion is needed to know the total momentum.

Derivation 4.1 · v_cm and P = Mv_cm
  1. \(M\vec r_{\text{cm}}=\sum m_i\vec r_i\) with constant masses (Figure 4.1).
  2. Differentiate: \(M\vec v_{\text{cm}}=\sum m_i\vec v_i=\sum\vec p_i=\vec P\).
  3. So \(\vec v_{\text{cm}}=\dfrac{\sum m_i\vec v_i}{M}\), computed component by component.
  4. Example: 1 kg at (4, 0) m/s and 3 kg at (0, 4) m/s: \(\vec v_{\text{cm}}=(1,3)\) m/s, \(\vec P=(4,12)\) kg m/s.
\[ \begin{gathered} \vec v_{\text{cm}}=\frac{\sum m_i\vec v_i}{M} \\[4pt] \vec P=M\vec v_{\text{cm}} \end{gathered} \]
1 kg: (4, 0)3 kg: (0, 4)vcm = (1, 3)vcm = Σmv / MP = Mvcm = (4, 12)

Figure 4.1 · Derivation 4.1 (Example 4.1). The CM velocity is the mass-weighted average of the particle velocities; it points mostly along the heavier particle’s velocity. The total momentum is M times it.

4.2 Acceleration of the CM: only external forces count

The basic idea

Differentiate once more: \(M\vec a_{\text{cm}}=\sum m_i\vec a_i=\sum\vec F_i\), the sum of all forces on all particles. The internal forces — the forces the particles exert on one another — come in Newton’s-third-law pairs and cancel in this sum. What is left is only the net external force. The CM therefore moves like a single particle of mass M acted on by the external forces alone, however violently the parts push, pull, collide or explode inside.

Derivation 4.2 · F_ext = M a_cm
  1. Force on particle i: \(\vec F_i=\vec F_i^{\text{ext}}+\sum_{j\ne i}\vec f_{ij}\), where \(\vec f_{ij}\) is the force of j on i (Figure 4.2).
  2. Sum over all particles: the internal terms pair up as \(\vec f_{ij}+\vec f_{ji}=0\) (third law).
  3. \(\sum m_i\vec a_i=\sum\vec F_i^{\text{ext}}\Rightarrow M\vec a_{\text{cm}}=\vec F_{\text{ext}}\).
  4. Equivalently \(\vec F_{\text{ext}}=d\vec P/dt\). If \(\vec F_{\text{ext}}=0\), \(\vec v_{\text{cm}}\) is constant.
\[ \vec F_{\text{ext}}=M\vec a_{\text{cm}}=\frac{d\vec P}{dt} . \]
1 kg2 kgff3 N6 Ninternal pair cancels: Macm = Fext

Figure 4.2 · Derivation 4.2 (Example 4.2). The internal forces f are equal and opposite and cancel in the sum over the system. Only the external forces (red) accelerate the CM: a_cm = 9 N / 3 kg.

4.3 Explosions in flight

The basic idea

A shell bursting in mid-air is the classic illustration. The explosion forces are internal, so they cannot change the motion of the CM: after the burst, the CM of the fragments carries on along the same parabola, as long as all the fragments are still in the air (gravity is the only external force). If the pieces land at the same time, the CM lands where the unexploded shell would have. Momentum conservation at the instant of the burst gives the velocities of the fragments.

Derivation 4.3 · Landing points after a burst at the top
  1. Shell of mass M bursts at the top of its path (velocity \(v_x\) horizontal, height H) into m₁ and m₂ (Figure 4.3).
  2. Momentum (horizontal) at the burst: \(Mv_x=m_1v_1+m_2v_2\). Vertical: both start with zero vertical velocity if they move horizontally.
  3. Both fall for the same time \(t=\sqrt{2H/g}\), so they land together.
  4. Landing CM: \(\dfrac{m_1x_1+m_2x_2}{M}\) = the original landing point R (range).
  5. Equal halves, one dropping straight down from the top (x = R/2): the other lands at \(x_2=2R-R/2=3R/2\).
\[ m_1x_1+m_2x_2=MR\quad(\text{pieces landing together}) . \]
burstR/2CM lands: R3R/2CM continues on the parabola

Figure 4.3 · Derivation 4.3 (Example 4.3). At the top the shell bursts into equal halves; one drops straight down. The explosion forces are internal, so the CM keeps to the original parabola (dashed) and lands at R; the other half must land at 3R/2.

4.4 The CM of connected bodies

The basic idea

In an Atwood machine one block goes up and the other down, yet the CM of the pair still accelerates — downward, toward the heavier side. The external forces on the pair are the two weights and the upward pull of the pulley’s support (2T through the string). Their sum, divided by the total mass, is the CM’s acceleration; the same answer comes directly from the weighted average of the blocks’ accelerations.

Derivation 4.4 · CM acceleration in an Atwood machine
  1. Masses \(m_1>m_2\) over a light pulley: \(a=\dfrac{(m_1-m_2)g}{m_1+m_2}\), m₁ down, m₂ up (Figure 4.4).
  2. Weighted average (up positive): \(a_{\text{cm}}=\dfrac{-m_1a+m_2a}{m_1+m_2}=-\dfrac{(m_1-m_2)^2g}{(m_1+m_2)^2}\).
  3. Check with external forces: \(2T-(m_1+m_2)g\) with \(T=\dfrac{2m_1m_2g}{m_1+m_2}\): \(a_{\text{cm}}=\dfrac{4m_1m_2-(m_1+m_2)^2}{(m_1+m_2)^2}g=-\dfrac{(m_1-m_2)^2}{(m_1+m_2)^2}g\) ✓.
  4. 3 kg and 2 kg: a = 2 m/s²; \(a_{\text{cm}}=-0.4\) m/s² (downward).
\[ a_{\text{cm}}=-\left(\frac{m_1-m_2}{m_1+m_2}\right)^2g\quad(\text{downward}) . \]
3 kg2 kg22acm = 0.4external: 2T up, (m₁+m₂)g down

Figure 4.4 · Derivation 4.4 (Example 4.4). The 3 kg block falls and the 2 kg block rises at 2 m/s². Their CM still accelerates downward, at ((m₁ − m₂)/(m₁ + m₂))²g = 0.4 m/s², because the support’s pull 2T is less than the total weight.

Solved examples 4.1–4.6

Example 4.1

L2 Basic application
Problem
A 1 kg particle moves at (4, 0) m/s and a 3 kg particle at (0, 4) m/s. Find the velocity of their CM, its speed, and the total momentum.
Concepts tested
v_cm as a weighted average
Given
1 kg, (4, 0); 3 kg, (0, 4)
To find
\(\vec v_{\text{cm}}\), speed, \(\vec P\)
Diagram or graph
Figure 4.1
Sign convention
—
Method
Derivation 4.1.
Detailed solution
  1. \(\vec P=(4,0)+(0,12)=(4,12)\) kg m/s.
  2. \(\vec v_{\text{cm}}=\vec P/4=(1,3)\) m/s.
  3. Speed \(\sqrt{10}=3.16\) m/s.
Justification
Derivation 4.1
Calculation
(1, 3) m/s; 3.16 m/s; (4, 12) kg m/s
Answer
\(\vec v_{\text{cm}}=(1,3)\) m/s, speed 3.16 m/s; \(\vec P=(4,12)\) kg m/s
Interpretation
The CM moves mostly along the heavier particle’s direction.
Alternative method
—
Common trap
Averaging the speeds (4 m/s each).
Recognise it
Velocities of particles given; “velocity of the CM”.

Example 4.2

L2 Basic application
Problem
Two particles of 1 kg and 2 kg are at rest on a smooth floor. Horizontal forces of 3 N and 6 N act on them along +x, while they also attract each other with a force of 2 N. Find the acceleration of their CM.
Concepts tested
Internal forces cancel
Given
External 3 N and 6 N; internal 2 N pair
To find
\(a_{\text{cm}}\)
Diagram or graph
Figure 4.2
Sign convention
+x positive
Method
Derivation 4.2.
Detailed solution
  1. External total: 9 N; internal forces cancel.
  2. \(a_{\text{cm}}=9/3=3\) m/s².
Justification
Derivation 4.2
Calculation
3 m/s²
Answer
3 m/s² along +x
Interpretation
The 2 N attraction changes the separation, not the CM’s motion.
Alternative method
—
Common trap
Including the internal 2 N forces.
Recognise it
Mixture of internal and external forces.

Example 4.3

L3 JEE Main
Problem
A shell is fired at 100 m/s at 37° above the horizontal. At the top of its path it bursts into two equal pieces; one falls vertically from rest. Where does the other land?
Concepts tested
CM continues on the parabola
Given
u = 100 m/s, θ = 37°; equal halves; one drops vertically
To find
Landing point of the second piece
Diagram or graph
Figure 4.3
Sign convention
Horizontal from the gun
Method
Derivation 4.3.
Detailed solution
  1. Range without the burst: \(R=\dfrac{u^2\sin2\theta}{g}=\dfrac{10\,000\times0.96}{10}=960\) m.
  2. The first piece lands below the top: x₁ = 480 m.
  3. Both land together: \(\tfrac12(480)+\tfrac12x_2=960\Rightarrow x_2=1440\) m.
  4. Check by momentum: the second piece moves off at 2 × 80 = 160 m/s horizontally; 480 + 160 × 6 = 1440 m ✓ (fall time 6 s).
Justification
Derivation 4.3
Calculation
1440 m
Answer
1440 m from the gun
Interpretation
The CM still lands at 960 m.
Alternative method
Momentum at the burst plus the fall time.
Common trap
Assuming the second piece lands at 960 m.
Recognise it
“Bursts at the highest point”.

Example 4.4

L3 JEE Main
Problem
In an Atwood machine with masses of 3 kg and 2 kg, find the acceleration of each block and of their CM.
Concepts tested
CM of connected bodies
Given
m₁ = 3 kg, m₂ = 2 kg
To find
a, \(a_{\text{cm}}\)
Diagram or graph
Figure 4.4
Sign convention
Up positive
Method
Derivation 4.4.
Detailed solution
  1. \(a=\dfrac{(3-2)10}{5}=2\) m/s².
  2. \(a_{\text{cm}}=\dfrac{3(-2)+2(+2)}{5}=-0.4\) m/s².
  3. Check: T = 24 N; \((2\times24-50)/5=-0.4\) ✓.
Justification
Derivation 4.4
Calculation
2 m/s²; −0.4 m/s²
Answer
Blocks 2 m/s²; CM 0.4 m/s² downward
Interpretation
The pulley support pulls up with 48 N, a little less than the 50 N total weight.
Alternative method
—
Common trap
Concluding that the CM is at rest because one block rises as the other falls.
Recognise it
Atwood machine, “acceleration of the CM”.

Example 4.5

L4 Advanced
Problem
A 3 kg shell moving horizontally at 20 m/s at the top of its path, 20 m above level ground and 40 m (horizontally) from the gun, bursts into a 1 kg piece that is left at rest and a 2 kg piece. Find where each lands, and check that the CM lands where the shell would have.
Concepts tested
Momentum at the burst; CM motion
Given
M = 3 kg, v = 20 m/s, H = 20 m, x₀ = 40 m
To find
Landing points
Diagram or graph
Figure 4.3
Sign convention
Horizontal from the gun
Method
Momentum, then fall time.
Detailed solution
  1. Momentum: \(3(20)=1(0)+2v_2\Rightarrow v_2=30\) m/s.
  2. Fall time: \(\sqrt{2(20)/10}=2\) s.
  3. 1 kg piece: 40 m. 2 kg piece: \(40+30\times2=100\) m.
  4. CM: \(\dfrac{1(40)+2(100)}{3}=80\) m; unexploded shell: \(40+20\times2=80\) m ✓.
Justification
Derivation 4.3
Calculation
40 m; 100 m; 80 m
Answer
40 m and 100 m from the gun (CM at 80 m)
Interpretation
The heavier piece lands closer to the CM’s landing point.
Why this method
Find one landing point; the other follows from the CM.
Common trap
Splitting the velocity equally between the pieces.
Recognise it
Unequal fragments, one at rest.

Example 4.6

L4 Advanced
Problem
Blocks of 1 kg and 2 kg on a smooth floor are joined by a spring. A constant 12 N force pulls the 2 kg block. Find the acceleration of the CM and its velocity after 2 s (starting from rest). At that instant the 1 kg block moves at 10 m/s; find the speed of the 2 kg block.
Concepts tested
Spring forces are internal
Given
m₁ = 1 kg, m₂ = 2 kg, F = 12 N, t = 2 s, v₁ = 10 m/s
To find
\(a_{\text{cm}}\), \(v_{\text{cm}}\), v₂
Diagram or graph
Figure 4.2
Sign convention
Along F positive
Method
\(a_{\text{cm}}=F/M\) whatever the spring does.
Detailed solution
  1. \(a_{\text{cm}}=12/3=4\) m/s².
  2. \(v_{\text{cm}}=4\times2=8\) m/s.
  3. \(1(10)+2v_2=3(8)\Rightarrow v_2=7\) m/s.
Justification
Derivation 4.2
Calculation
4 m/s²; 8 m/s; 7 m/s
Answer
4 m/s²; 8 m/s; 7 m/s
Interpretation
The blocks oscillate relative to each other, but the CM accelerates steadily.
Why this method
Never solve the oscillation: the CM ignores it.
Common trap
Treating the spring force as external.
Recognise it
Bodies joined by a spring, external force on one.

Exercise 4

Q4.1L1Single correct · internal forces · 1 min

Internal forces in a system can change

(A) the velocity of the CM(B) the total momentum(C) the velocities of individual particles(D) the acceleration of the CM
Solution
(C).
Q4.2L1Numerical · v_cm · 1 min

A 2 kg body moves at 5 m/s and a 3 kg body is at rest. Find the speed of their CM.

Solution
2 m/s.
Q4.3L2Numerical · momentum · 1 min

A system of total mass 4 kg has total momentum 20 kg m/s. Find the speed of its CM.

Solution
5 m/s.
Q4.4L2Numerical · a_cm · 1 min

A 4 N force acts along +x on a 1 kg body and a 2 N force along −x on a 3 kg body. Find the acceleration of their CM.

Solution
\(2/4=\) 0.5 m/s² along +x.
Q4.5L3Numerical · burst at the top · 2 min

A shell with range 200 m bursts at the top into two equal pieces; one retraces its path to the gun. Where does the other land?

Solution
Velocities −v and 3v: \(100+3(100)=\) 400 m from the gun.
Q4.6L3Numerical · Atwood CM · 2 min

Find the acceleration of the CM of an Atwood machine with masses of 5 kg and 3 kg.

Solution
\(\left(\tfrac{2}{8}\right)^2(10)=\) 0.625 m/s² downward.
Q4.7L4Numerical · meeting point · 2 min

A 2 kg body at x = 0 and a 1 kg body at x = 6 m start from rest and attract each other (no external forces). Where do they meet?

Solution
At the CM, which stays at rest: x = 2 m.
Q4.8L5Numerical · three fragments · 4 min

A 3 kg shell moving horizontally at 20 m/s, 45 m above level ground, bursts into three 1 kg pieces. One is left at rest; one moves vertically upward at 15 m/s. Find the velocity of the third, and how far beyond the burst point (horizontally) it lands.

Solution
Momentum: third piece (60, −15) m/s. Fall: \(45=15t+5t^2\Rightarrow t=1.854\) s: 111 m beyond the burst point.

Chapter 5 · Conservation of momentum and the stationary centre of mass

5.1 When momentum is conserved

The basic idea

If the net external force on a system is zero, its total momentum cannot change (Derivation 4.2): the momentum one part gains, another loses. This is the law of conservation of linear momentum. It holds whatever the internal forces — collisions, explosions, springs, friction between the parts. It also holds component by component: if the external forces are all vertical (gravity, the normal force of a smooth floor), the horizontal momentum is conserved even though the vertical momentum is not.

Derivation 5.1 · Conservation of momentum, in full or along one direction
  1. \(\vec F_{\text{ext}}=d\vec P/dt\). If \(\vec F_{\text{ext}}=0\): \(\vec P\) = constant, i.e. \(\sum m_i\vec v_i\) before = after (Figure 5.1).
  2. If only \(F_{\text{ext},x}=0\): \(P_x\) = constant, even if \(P_y\) changes.
  3. Two bodies: \(m_1\vec u_1+m_2\vec u_2=m_1\vec v_1+m_2\vec v_2\).
  4. Recoil of a gun (M) firing a bullet (m) at v, from rest: \(0=mv+MV\Rightarrow V=-mv/M\).
\[ \begin{gathered} \vec F_{\text{ext}}=0\Rightarrow\sum m_i\vec v_i=\text{constant} \\[4pt] F_{\text{ext},x}=0\Rightarrow P_x=\text{constant} \end{gathered} \]
rifle MvV0 = mv + MV

Figure 5.1 · Derivation 5.1 (Example 5.1). Before firing the total momentum is zero. The explosion forces are internal, so afterwards the bullet’s momentum mv is balanced by the rifle’s recoil momentum MV.

5.2 A person walking on a boat: the CM stays put

The basic idea

A man stands on a boat at rest in still water (water resistance negligible). He walks to the other end. With no horizontal external force, the CM of man + boat, initially at rest, must stay at rest. So as the man moves forward, the boat slides back, and the two displacements are in the inverse ratio of the masses. This “stationary CM” argument answers displacement questions without any velocities or times — it does not matter whether he walks, runs or stops halfway.

Derivation 5.2 · Displacements of the man and the boat
  1. Man m, boat M, both at rest; he walks a distance d relative to the boat (Figure 5.2).
  2. Let the boat move by X and the man by x (ground frame, forward positive). Relative displacement: \(x-X=d\).
  3. Stationary CM: \(mx+MX=0\).
  4. Solve: \(X=-\dfrac{md}{m+M}\) (boat moves back), \(x=\dfrac{Md}{m+M}\) (man moves forward).
\[ \begin{gathered} X_{\text{boat}}=-\frac{m\,d}{m+M} \\[4pt] x_{\text{man}}=\frac{M\,d}{m+M} \end{gathered} \]
d (relative to the boat)boat: md/(m+M)CM fixed

Figure 5.2 · Derivation 5.2 (Example 5.2). As the man walks a distance d along the boat, the boat slides back so that the CM of man + boat stays where it was. The boat moves md/(m + M), the man M d/(m + M).

5.3 A block sliding on a free wedge

The basic idea

A block slides down a smooth wedge that itself rests on a smooth floor. The block pushes the wedge backward through the normal force, so the wedge recoils. The external forces (gravity, the floor’s normal force) are vertical, so horizontal momentum is conserved and the horizontal position of the CM stays fixed. When the block has moved horizontally a distance L relative to the wedge, the wedge has moved back by mL/(m + M).

Derivation 5.3 · Displacement of a free wedge
  1. Block m on a smooth wedge M on a smooth floor, both at rest; the block slides down a slope of horizontal length L (Figure 5.3).
  2. No horizontal external force: \(x_{\text{cm}}\) stays fixed: \(m\Delta x_{\text{block}}+M\Delta x_{\text{wedge}}=0\).
  3. Relative horizontal displacement: \(\Delta x_{\text{block}}-\Delta x_{\text{wedge}}=L\).
  4. \(\Delta x_{\text{wedge}}=-\dfrac{mL}{m+M}\); \(\Delta x_{\text{block}}=\dfrac{ML}{m+M}\).
  5. The vertical CM does move (the block descends): vertical momentum is not conserved.
\[ \Delta x_{\text{wedge}}=-\frac{mL}{m+M} . \]
wedge: −mL/(m+M)Lhorizontal momentum conserved(external forces vertical)

Figure 5.3 · Derivation 5.3 (Example 5.3). The block’s push on the wedge is internal; the only external forces are vertical. So the horizontal CM stays fixed and the wedge moves back by mL/(m + M) while the block descends the slope (dashed: final wedge).

5.4 Explosions from rest: how the kinetic energy is shared

The basic idea

When a body at rest splits into two (a bomb, a nucleus, a gun and its bullet), the two pieces get equal and opposite momenta. Since \(K=p^2/2m\), the lighter piece gets the larger share of the kinetic energy, in the inverse ratio of the masses. A bullet takes almost all the energy; the gun’s recoil energy is tiny, even though their momenta are equal.

Derivation 5.4 · Energy sharing in a two-piece explosion
  1. At rest, then pieces m₁ and m₂: \(m_1v_1=m_2v_2=p\) (opposite directions) (Figure 5.4).
  2. \(K_1=\dfrac{p^2}{2m_1}\), \(K_2=\dfrac{p^2}{2m_2}\Rightarrow\dfrac{K_1}{K_2}=\dfrac{m_2}{m_1}\).
  3. With total K: \(K_1=\dfrac{m_2}{m_1+m_2}K\), \(K_2=\dfrac{m_1}{m_1+m_2}K\).
  4. Gun and bullet: \(K_{\text{gun}}/K_{\text{bullet}}=m/M\).
\[ \begin{gathered} \frac{K_1}{K_2}=\frac{m_2}{m_1} \\[4pt] K_1=\frac{m_2}{m_1+m_2}K \end{gathered} \]
00.250.50.75100.250.50.751f = m₁ / (m₁ + m₂)share of the kinetic energypiece 1: K₁/K = 1 − fpiece 2: K₂/K = ff = 1/3: lighter piece gets 2/3 of K

Figure 5.4 · Derivation 5.4 (Example 5.4). In a two-piece explosion from rest the momenta are equal and opposite, so each piece’s share of the energy is the other piece’s mass fraction: K₁ = m₂K/(m₁ + m₂). The lighter piece always gets more.

Solved examples 5.1–5.6

Example 5.1

L2 Basic application
Problem
A 4 kg rifle fires a 20 g bullet at 400 m/s. Find the recoil speed of the rifle and the ratio of the kinetic energies.
Concepts tested
Recoil
Given
M = 4 kg, m = 0.02 kg, v = 400 m/s
To find
V; \(K_{\text{bullet}}/K_{\text{rifle}}\)
Diagram or graph
Figure 5.4
Sign convention
Bullet’s direction positive
Method
Derivations 5.1 and 5.4.
Detailed solution
  1. \(0=0.02(400)+4V\Rightarrow V=-2\) m/s.
  2. \(K_{\text{bullet}}=\tfrac12(0.02)(400)^2=1600\) J; \(K_{\text{rifle}}=\tfrac12(4)(4)=8\) J.
  3. Ratio 200 = M/m ✓.
Justification
Derivations 5.1 and 5.4
Calculation
2 m/s; 200
Answer
2 m/s backward; the bullet has 200 times the rifle’s kinetic energy
Interpretation
Equal momenta, very unequal energies.
Alternative method
—
Common trap
Assuming equal kinetic energies.
Recognise it
Gun, bullet, recoil.

Example 5.2

L2 Basic application
Problem
A 60 kg man stands at one end of a 140 kg boat at rest on still water. He walks 5 m toward the other end. How far does the boat move, and how far does he move relative to the shore?
Concepts tested
Stationary CM
Given
m = 60 kg, M = 140 kg, d = 5 m (relative to the boat)
To find
X, x
Diagram or graph
Figure 5.2
Sign convention
Man’s direction positive
Method
Derivation 5.2.
Detailed solution
  1. \(X=-\dfrac{60\times5}{200}=-1.5\) m.
  2. \(x=\dfrac{140\times5}{200}=3.5\) m.
  3. Check: \(x-X=5\) ✓ and \(60(3.5)+140(-1.5)=0\) ✓.
Justification
Derivation 5.2
Calculation
1.5 m; 3.5 m
Answer
The boat moves 1.5 m back; the man moves 3.5 m forward relative to the shore
Interpretation
The same answer whatever his speed or stops along the way.
Alternative method
—
Common trap
Taking 5 m as the man’s displacement relative to the shore.
Recognise it
Person walking on a boat, plank or cart.

Example 5.3

L3 JEE Main
Problem
A 1 kg block slides from the top to the bottom of a smooth wedge of mass 4 kg resting on a smooth floor. The slope’s horizontal length is 2.5 m. How far does the wedge move?
Concepts tested
Horizontal CM fixed
Given
m = 1 kg, M = 4 kg, L = 2.5 m
To find
\(\Delta x_{\text{wedge}}\)
Diagram or graph
Figure 5.3
Sign convention
Block’s horizontal direction positive
Method
Derivation 5.3.
Detailed solution
  1. \(\Delta x_{\text{wedge}}=-\dfrac{1\times2.5}{5}=-0.5\) m.
  2. Block: +2 m horizontally (relative displacement 2.5 m ✓).
Justification
Derivation 5.3
Calculation
0.5 m
Answer
0.5 m, opposite to the block’s horizontal motion
Interpretation
The slope’s angle and height do not matter.
Alternative method
—
Common trap
Conserving vertical momentum too.
Recognise it
Block on a free wedge.

Example 5.4

L3 JEE Main
Problem
A bomb at rest explodes into two pieces whose masses are in the ratio 1 : 2. The total kinetic energy released is 600 J. Find the kinetic energy of each piece.
Concepts tested
Energy sharing
Given
m₁ : m₂ = 1 : 2, K = 600 J
To find
K₁, K₂
Diagram or graph
Figure 5.4
Sign convention
—
Method
Derivation 5.4.
Detailed solution
  1. \(K_1:K_2=m_2:m_1=2:1\).
  2. \(K_1=400\) J (lighter), \(K_2=200\) J (heavier).
Justification
Derivation 5.4
Calculation
400 J; 200 J
Answer
Lighter piece 400 J; heavier piece 200 J
Interpretation
Equal and opposite momenta; K ∝ 1/m.
Alternative method
—
Common trap
Sharing the energy in proportion to the masses.
Recognise it
Explosion from rest into two pieces.

Example 5.5

L4 Advanced
Problem
A 50 kg man stands on a 100 kg cart at rest on a smooth track. He starts walking at 3 m/s relative to the cart. Find the velocities of the man and the cart relative to the ground. How far does each move in 4 s?
Concepts tested
Momentum with relative velocity
Given
m = 50 kg, M = 100 kg, \(v_{\text{rel}}=3\) m/s
To find
\(v_m\), \(v_c\); displacements in 4 s
Sign convention
Man’s direction positive
Method
\(v_m=v_c+3\); total momentum zero.
Detailed solution
  1. \(50(v_c+3)+100v_c=0\Rightarrow150v_c=-150\Rightarrow v_c=-1\) m/s.
  2. \(v_m=-1+3=2\) m/s.
  3. In 4 s: man +8 m, cart −4 m (relative 12 m = 3 × 4 ✓).
Justification
Derivation 5.1
Calculation
2 m/s; −1 m/s; 8 m; −4 m
Answer
Man 2 m/s forward, cart 1 m/s backward; 8 m and 4 m
Interpretation
The relative speed is shared in the inverse ratio of the masses.
Why this method
Always write the relative velocity first, then conserve momentum.
Common trap
Using 3 m/s as the man’s ground speed.
Recognise it
“Relative to the cart”.

Example 5.6

L5 Advanced challenge
Problem
Two men, each of mass 50 kg, stand on a 100 kg cart at rest on a smooth track. Each can jump off the back with a speed of 5 m/s relative to the cart (relative to the cart’s velocity just after the jump). Find the cart’s final speed if (a) both jump together, (b) they jump one after the other.
Concepts tested
Repeated momentum conservation with relative velocity
Given
Men 50 kg each, cart 100 kg, \(v_{\text{rel}}=5\) m/s backward
To find
Final cart speed in both cases
Sign convention
Cart’s forward direction positive
Method
Momentum before = after for each jump, with man’s velocity = V − 5.
Detailed solution
  1. (a) Together: \(0=100V+100(V-5)\Rightarrow V=2.5\) m/s.
  2. (b) First jump (cart + one man remain, 150 kg): \(0=150V_1+50(V_1-5)\Rightarrow V_1=1.25\) m/s.
  3. Second jump: \(150(1.25)=100V_2+50(V_2-5)\Rightarrow187.5+250=150V_2\Rightarrow V_2=2.92\) m/s.
Justification
Derivation 5.1
Calculation
2.5 m/s; 2.92 m/s
Answer
(a) 2.5 m/s; (b) 2.92 m/s
Interpretation
Jumping one at a time gives more: the second man pushes off a lighter, already-moving cart. This is the idea behind staging rockets.
Why this method
Treat each jump as its own two-body problem, starting from the momentum left by the previous one.
Common trap
Using the cart’s initial velocity in the relative velocity for the second jump.
Recognise it
Several bodies leaving a cart or rocket in turn.

Exercise 5

Q5.1L1Numerical · recoil · 1 min

A 5 kg rifle fires a 10 g bullet at 500 m/s. Find the recoil speed.

Solution
1 m/s.
Q5.2L2Numerical · boat · 1 min

A 50 kg man walks 10 m relative to a 200 kg boat on still water. How far does the boat move?

Solution
\(50\times10/250=\) 2 m.
Q5.3L2Numerical · explosion · 1 min

A body at rest explodes into two pieces of masses in the ratio 3 : 2. The lighter piece moves at 6 m/s. Find the speed of the heavier.

Solution
4 m/s.
Q5.4L3Numerical · wedge · 1 min

A 1 kg block slides down a smooth 3 kg wedge (on a smooth floor) whose slope has a horizontal length of 2 m. How far does the wedge move?

Solution
0.5 m.
Q5.5L3Numerical · dog on a boat · 2 min

A 10 kg dog stands on a 40 kg boat, 20 m from the shore. It walks 5 m toward the shore relative to the boat. How far is it from the shore now?

Solution
Dog moves \(40\times5/50=4\) m: 16 m.
Q5.6L4Numerical · relative walking speed · 2 min

A 60 kg man walks at 1.5 m/s relative to a 120 kg plank floating at rest. Find his speed and the plank’s relative to the water.

Solution
\(60(v+1.5)+120v=0\): plank 0.5 m/s backward, man 1.0 m/s forward.
Q5.7L4Numerical · quarter-circle track · 2 min

A 1 kg block slides from the top of a smooth quarter-circle groove (radius 0.5 m) cut in a 4 kg block resting on a smooth floor. How far has the big block moved when the small one reaches the bottom?

Solution
Relative horizontal displacement R: \(1\times0.5/5=\) 0.1 m.
Q5.8L5Numerical · jumping one at a time · 3 min

Two 20 kg boys stand on a 60 kg cart at rest on a smooth track. Each jumps off the back at 4 m/s relative to the cart. Find the cart’s final speed if they jump together and if they jump one after the other.

Solution
Together: \(60V+40(V-4)=0\Rightarrow\) 1.6 m/s. In turn: \(V_1=0.8\) m/s; \(80(0.8)=60V_2+20(V_2-4)\Rightarrow\) 1.8 m/s.

Chapter 6 · Impulse and impulsive forces

6.1 Impulse and the impulse–momentum theorem

The basic idea

When a bat hits a ball, the force is huge but lasts only a millisecond or so, and it rises and falls in a way we cannot measure in detail. What we can measure is its total effect: the change in the ball’s momentum. That total effect is the impulse, \(\vec J=\int\vec F\,dt\), the area under the force–time graph. The impulse–momentum theorem says \(\vec J=\Delta\vec p\). Dividing by the contact time gives the average force.

Derivation 6.1 · J = ∫F dt = Δp
  1. Second law: \(\vec F=d\vec p/dt\Rightarrow\vec F\,dt=d\vec p\) (Figure 6.1).
  2. Integrate over the contact: \(\vec J=\displaystyle\int_{t_1}^{t_2}\vec F\,dt=\vec p_2-\vec p_1\).
  3. On an F–t graph, J is the area under the curve (positive above the axis).
  4. Average force: \(\bar{\vec F}=\dfrac{\vec J}{\Delta t}=\dfrac{\Delta\vec p}{\Delta t}\).
  5. Triangular pulse of peak F₀ and duration τ: \(J=\tfrac12F_0\tau\), average \(F_0/2\).
\[ \begin{gathered} \vec J=\int\vec F\,dt=\Delta\vec p \\[4pt] \bar{\vec F}=\frac{\Delta\vec p}{\Delta t} \end{gathered} \]
020040060000.0050.010.0150.020.025t (s)F (N)peak 600 Narea J = 6 N saverage 300 N

Figure 6.1 · Derivation 6.1 (Example 6.1). The impulse is the area under the force–time curve: ½ × 0.02 s × 600 N = 6 N s, which equals the change in momentum. The average force (dashed) is the impulse divided by the contact time.

6.2 Rebounds from a wall or floor

The basic idea

Momentum is a vector, so the change in momentum on a rebound is a vector difference. A ball hitting a wall head-on at v and bouncing back at v has Δp = 2mv, not zero. If it strikes at an angle to a smooth wall, only the component of velocity perpendicular to the wall reverses; the parallel component is unchanged, so the impulse (and the force on the wall) is perpendicular to the wall.

Derivation 6.2 · Impulse on an oblique rebound
  1. Ball of mass m hits a smooth wall at speed u, at angle θ to the normal, and leaves at speed v at angle θ′ (Figure 6.2).
  2. Parallel component unchanged (smooth wall): \(u\sin\theta=v\sin\theta’\).
  3. Normal component reverses: from \(-u\cos\theta\) to \(+v\cos\theta’\).
  4. \(J=m(v\cos\theta’+u\cos\theta)\), along the normal. Elastic rebound (v = u, θ′ = θ): \(J=2mu\cos\theta\).
\[ \begin{gathered} J=m\left(v\cos\theta’+u\cos\theta\right) \\[4pt] \text{elastic: }J=2mu\cos\theta\ \ (\text{normal to the wall}) \end{gathered} \]
normaluvθθJ = 2mu cos θparallel component unchangednormal component reversed

Figure 6.2 · Derivation 6.2 (Example 6.2). On a smooth wall only the velocity component along the normal changes; for an elastic bounce it reverses from −u cos θ to +u cos θ. The impulse, 2mu cos θ, is perpendicular to the wall.

6.3 Impulsive forces: the ballistic pendulum

The basic idea

During a very short impact, the impact forces are enormous compared with ordinary forces such as gravity, friction or a string’s tension, whose impulses over the brief contact are negligible. So momentum is conserved during the impact even if it is not conserved before or after. The ballistic pendulum exploits this: a bullet embeds in a hanging block (momentum conserved, energy not); then the block swings up (energy conserved, momentum not). Two stages, two different laws.

Derivation 6.3 · Bullet speed from the rise of a ballistic pendulum
  1. Bullet m at speed v embeds in a block M hanging on strings (Figure 6.3).
  2. Impact (very short; gravity and tension give negligible horizontal impulse): \(mv=(m+M)V\).
  3. Swing (no more collision; tension does no work): \(\tfrac12(m+M)V^2=(m+M)gh\Rightarrow V=\sqrt{2gh}\).
  4. So \(v=\dfrac{m+M}{m}\sqrt{2gh}\).
  5. Energy lost in the impact: \(\tfrac12mv^2-\tfrac12(m+M)V^2=\tfrac12mv^2\dfrac{M}{m+M}\) — almost all of it.
\[ \begin{gathered} v=\frac{m+M}{m}\sqrt{2gh} \\[4pt] \frac{\Delta K}{K}=\frac{M}{m+M} \end{gathered} \]
Mvhimpact: mv = (m + M)Vswing: V = √(2gh)

Figure 6.3 · Derivation 6.3 (Example 6.3). During the brief impact only the huge contact forces matter, so momentum is conserved: mv = (m + M)V. During the swing that follows, energy is conserved: V = √(2gh).

6.4 Impulsive tension: a slack string becomes taut

The basic idea

Two blocks joined by a slack string: one is moving, the other at rest. When the string suddenly becomes taut, a huge, brief tension acts on both. If the string is inextensible and does not bounce, the two blocks then move with the same speed along the string — exactly like a perfectly inelastic collision. Momentum along the string is conserved (the tension is internal), kinetic energy is lost, and the jerk is an impulsive tension J = Δp of either block.

Derivation 6.4 · Common speed after a string jerks taut
  1. Block m₁ moves at u; the string to m₂ (at rest) becomes taut (Figure 6.4).
  2. Impulsive tension J on each, opposite directions: \(m_1v-m_1u=-J\), \(m_2v-0=J\).
  3. Add: \(v=\dfrac{m_1u}{m_1+m_2}\); \(J=\dfrac{m_1m_2u}{m_1+m_2}\).
  4. Energy lost: \(\tfrac12\dfrac{m_1m_2}{m_1+m_2}u^2\).
  5. Over a pulley (one block falling, one lifted from a floor) the same holds along the string; gravity’s impulse during the jerk is negligible and the floor cannot pull down.
\[ \begin{gathered} v=\frac{m_1u}{m_1+m_2} \\[4pt] J=\frac{m_1m_2u}{m_1+m_2} \\[4pt] \Delta K=\tfrac12\frac{m_1m_2}{m_1+m_2}u^2 \end{gathered} \]
m₁m₂uat restm₁m₂both: v = m₁u/(m₁ + m₂)slacktaut

Figure 6.4 · Derivation 6.4 (Example 6.5). When the slack string jerks taut, a large, brief tension acts on both blocks. Momentum along the string is conserved and the blocks move on together — like a perfectly inelastic collision, with kinetic energy lost.

Solved examples 6.1–6.6

Example 6.1

L2 Basic application
Problem
A 0.15 kg ball at rest is struck by a bat. The force rises uniformly from 0 to 600 N and falls back to 0 over 0.02 s. Find the impulse, the ball’s speed and the average force.
Concepts tested
Area under F–t
Given
Triangle: peak 600 N, duration 0.02 s; m = 0.15 kg
To find
J, v, \(\bar F\)
Diagram or graph
Figure 6.1
Sign convention
Direction of the force positive
Method
Derivation 6.1.
Detailed solution
  1. \(J=\tfrac12(0.02)(600)=6\) N s.
  2. \(v=J/m=6/0.15=40\) m/s.
  3. \(\bar F=6/0.02=300\) N.
Justification
Derivation 6.1
Calculation
6 N s; 40 m/s; 300 N
Answer
6 N s; 40 m/s; average force 300 N
Interpretation
The average force of a triangular pulse is half its peak.
Alternative method
—
Common trap
Using the peak force times the duration (12 N s).
Recognise it
F–t graph given.

Example 6.2

L2 Basic application
Problem
A 0.2 kg ball strikes a smooth wall at 10 m/s, its velocity making 60° with the normal, and rebounds elastically. Find the impulse on the ball and the average force if the contact lasts 0.01 s.
Concepts tested
Oblique rebound
Given
m = 0.2 kg, u = 10 m/s, θ = 60°, Δt = 0.01 s
To find
J, \(\bar F\)
Diagram or graph
Figure 6.2
Sign convention
Normal, away from the wall positive
Method
Derivation 6.2.
Detailed solution
  1. Normal component \(10\cos60^\circ=5\) m/s reverses: \(J=2(0.2)(5)=2\) N s.
  2. \(\bar F=2/0.01=200\) N, perpendicular to the wall.
Justification
Derivation 6.2
Calculation
2 N s; 200 N
Answer
2 N s (normal to the wall); 200 N
Interpretation
A glancing blow gives a smaller impulse than a head-on one (4 N s).
Alternative method
—
Common trap
Using the full speed: 2mu = 4 N s.
Recognise it
Ball hitting a wall at an angle.

Example 6.3

L3 JEE Main
Problem
A 10 g bullet embeds itself in a 2 kg wooden block hanging on long strings; the block rises 0.2 m. Find the speed of the bullet and the energy lost in the impact.
Concepts tested
Ballistic pendulum
Given
m = 0.01 kg, M = 2 kg, h = 0.2 m
To find
v; ΔK
Diagram or graph
Figure 6.3
Sign convention
—
Method
Derivation 6.3.
Detailed solution
  1. \(V=\sqrt{2\times10\times0.2}=2\) m/s.
  2. \(v=\dfrac{2.01}{0.01}\times2=402\) m/s.
  3. \(K_{\text{bullet}}=\tfrac12(0.01)(402)^2=808\) J; after impact \(\tfrac12(2.01)(4)=4.02\) J.
  4. Lost: 804 J (99.5%).
Justification
Derivation 6.3
Calculation
402 m/s; 804 J
Answer
402 m/s; 804 J lost
Interpretation
Almost all the bullet’s energy becomes heat and deformation of the wood.
Alternative method
—
Common trap
Using energy conservation through the impact: ½mv² = (m + M)gh.
Recognise it
Bullet into a hanging block that rises.

Example 6.4

L3 JEE Main
Problem
A 0.1 kg ball dropped from 5 m rebounds to 1.8 m. The contact with the floor lasts 0.01 s. Find the impulse given by the floor and the average normal force.
Concepts tested
Impulse with gravity during contact
Given
m = 0.1 kg, h₁ = 5 m, h₂ = 1.8 m, Δt = 0.01 s
To find
J, \(\bar N\)
Sign convention
Up positive
Method
Speeds from the heights; then J = Δp; include mg for N.
Detailed solution
  1. Speed in: \(\sqrt{100}=10\) m/s down; out: \(\sqrt{36}=6\) m/s up.
  2. \(\Delta p=0.1(6-(-10))=1.6\) N s (up).
  3. Average net force \(1.6/0.01=160\) N; \(\bar N=160+mg=161\) N.
Justification
Derivation 6.1
Calculation
1.6 N s; 161 N
Answer
Impulse 1.6 N s (net); average normal force 161 N
Interpretation
Gravity’s 1 N is negligible next to the impact force, as assumed in Section 6.3.
Alternative method
—
Common trap
Using the speeds’ difference (4 m/s) instead of their sum.
Recognise it
Ball dropped and rebounding.

Example 6.5

L4 Advanced
Problem
A 2 kg block moving at 5 m/s on a smooth floor is tied by a slack inextensible string to a 3 kg block at rest. Find the common speed after the string becomes taut, the impulsive tension and the kinetic energy lost.
Concepts tested
Impulsive tension
Given
m₁ = 2 kg, u = 5 m/s, m₂ = 3 kg
To find
v, J, ΔK
Diagram or graph
Figure 6.4
Sign convention
Direction of u positive
Method
Derivation 6.4.
Detailed solution
  1. \(v=\dfrac{2\times5}{5}=2\) m/s.
  2. \(J=m_2v=6\) N s (equally, \(m_1(u-v)=6\) N s).
  3. \(\Delta K=\tfrac12(2)(25)-\tfrac12(5)(4)=25-10=15\) J.
Justification
Derivation 6.4
Calculation
2 m/s; 6 N s; 15 J
Answer
2 m/s; 6 N s; 15 J lost
Interpretation
Formula check: \(\tfrac12\dfrac{6}{5}(25)=15\) J ✓.
Why this method
The string jerk is a perfectly inelastic collision along the string.
Common trap
Conserving kinetic energy through the jerk.
Recognise it
“String becomes taut”.

Example 6.6

L5 Advanced challenge
Problem
A 1 kg block falls freely through 0.8 m before the light string attached to it, passing over a fixed smooth pulley, becomes taut and jerks a 3 kg block resting on the floor on the other side. Find the speed just after the jerk and how high the 3 kg block then rises.
Concepts tested
Impulsive tension over a pulley; then ordinary motion
Given
m₁ = 1 kg falling 0.8 m; m₂ = 3 kg on the floor
To find
v after the jerk; rise of m₂
Sign convention
Along the string: m₁ down / m₂ up positive
Method
Jerk: momentum along the string; then a constant deceleration.
Detailed solution
  1. Speed before the jerk: \(\sqrt{2\times10\times0.8}=4\) m/s.
  2. Jerk (gravity’s impulse negligible; the floor cannot pull m₂ down): \(1\times4=(1+3)v\Rightarrow v=1\) m/s.
  3. After: net force along the string \(10-30=-20\) N on 4 kg: deceleration 5 m/s².
  4. Rise: \(v^2/2a=1/10=0.1\) m; then m₂ falls back to the floor.
Justification
Derivation 6.4
Calculation
1 m/s; 0.1 m
Answer
1 m/s just after the jerk; the 3 kg block rises 0.1 m
Interpretation
Energy check: 8 J before the jerk, 2 J after — 6 J lost in the jerk.
Why this method
Treat the jerk as an inelastic “collision” along the string, then use ordinary dynamics.
Common trap
Including the 3 kg block’s weight impulse during the jerk, or the floor’s normal force.
Recognise it
“Falls freely … string becomes taut”.

Exercise 6

Q6.1L1Numerical · impulse · 1 min

A 50 N force acts for 0.2 s. Find the impulse.

Solution
10 N s.
Q6.2L1Single correct · units · 1 min

The SI unit of impulse is the same as that of

(A) force(B) energy(C) momentum(D) power
Solution
(C). N s = kg m/s.
Q6.3L2Numerical · catching · 1 min

A 0.5 kg ball moving at 20 m/s is caught and stopped in 0.1 s. Find the average force.

Solution
100 N.
Q6.4L2Numerical · rectangular pulse · 1 min

A constant 10 N force acts for 3 s on a 2 kg body initially at rest. Find its final speed.

Solution
15 m/s.
Q6.5L3Numerical · head-on rebound · 1 min

A 0.2 kg ball hits a wall normally at 10 m/s and rebounds at 8 m/s. Find the impulse.

Solution
\(0.2(10+8)=\) 3.6 N s.
Q6.6L3Numerical · variable force · 2 min

A force F = 6t² N acts on a 2 kg body at rest for 2 s. Find its final speed.

Solution
\(J=2t^3\big|_0^2=16\) N s: 8 m/s.
Q6.7L4Numerical · ballistic pendulum · 2 min

A 20 g bullet at 500 m/s embeds in a 4.98 kg block hanging on long strings. How high does the block rise?

Solution
V = 10/5 = 2 m/s: \(h=V^2/2g=\) 0.2 m.
Q6.8L5Numerical · jerk over a pulley · 3 min

A 2 kg block falls freely through 1.25 m before the string over a fixed pulley becomes taut and jerks a 3 kg block off the floor. Find the speed after the jerk and the height the 3 kg block reaches.

Solution
5 m/s before; \(2(5)=5v\Rightarrow\) 2 m/s; deceleration \((30-20)/5=2\) m/s²: rises 1 m.

Chapter 7 · Collisions in one dimension

7.1 Head-on collisions and the coefficient of restitution

The basic idea

In a collision two bodies exert large forces on each other for a short time. Those forces are internal to the pair, so the total momentum is conserved. Kinetic energy may or may not be conserved: some is usually turned into heat, sound and permanent deformation. Newton’s experimental law of restitution captures how “bouncy” the collision is: the speed with which the bodies separate is e times the speed with which they approached. The coefficient of restitution e is 1 for a perfectly elastic collision, 0 for a perfectly inelastic one (the bodies stick), and in between otherwise.

Derivation 7.1 · Final velocities for any e
  1. Bodies m₁, m₂ with velocities u₁, u₂ before and v₁, v₂ after, all along one line (Figure 7.1).
  2. Momentum: \(m_1u_1+m_2u_2=m_1v_1+m_2v_2\).
  3. Restitution: \(v_2-v_1=e(u_1-u_2)\) (separation speed = e × approach speed).
  4. Solve: \(v_1=\dfrac{(m_1-em_2)u_1+(1+e)m_2u_2}{m_1+m_2}\), \(v_2=\dfrac{(m_2-em_1)u_2+(1+e)m_1u_1}{m_1+m_2}\).
  5. Perfectly inelastic (e = 0): \(v_1=v_2=\dfrac{m_1u_1+m_2u_2}{m_1+m_2}\).
\[ \begin{gathered} v_1=\frac{(m_1-em_2)u_1+(1+e)m_2u_2}{m_1+m_2} \\[4pt] v_2=\frac{(m_2-em_1)u_2+(1+e)m_1u_1}{m_1+m_2} \end{gathered} \]
m₁m₂u₁u₂beforev₁v₂afterv₂ − v₁ = e(u₁ − u₂)

Figure 7.1 · Derivation 7.1. Momentum is conserved in the collision, and the speed of separation is e times the speed of approach. These two equations give both final velocities for any e between 0 (sticking) and 1 (elastic).

7.2 Elastic collisions: special cases

The basic idea

When a moving body hits one at rest elastically, three cases are worth knowing by heart. Equal masses simply exchange velocities: the first stops dead and the second moves off with its speed (Newton’s cradle, a cue ball hitting a billiard ball head-on). A very heavy body hitting a light one barely slows down and sends the light one off at twice its speed. A light body hitting a very heavy one bounces back with almost its full speed, as from a wall.

Derivation 7.2 · Elastic collision with the target at rest
  1. e = 1, u₂ = 0: \(v_1=\dfrac{m_1-m_2}{m_1+m_2}u_1\), \(v_2=\dfrac{2m_1}{m_1+m_2}u_1\) (Figure 7.2).
  2. m₁ = m₂: v₁ = 0, v₂ = u₁ — exchange.
  3. m₁ ≫ m₂: v₁ ≈ u₁, v₂ ≈ 2u₁.
  4. m₁ ≪ m₂: v₁ ≈ −u₁, v₂ ≈ 0.
  5. Fraction of kinetic energy handed to m₂: \(\dfrac{4m_1m_2}{(m_1+m_2)^2}\) — 100% only for equal masses.
\[ \begin{gathered} v_1=\frac{m_1-m_2}{m_1+m_2}u_1 \\[4pt] v_2=\frac{2m_1}{m_1+m_2}u_1 \\[4pt] \frac{K_2}{K_1}=\frac{4m_1m_2}{(m_1+m_2)^2} \end{gathered} \]
−1−0.500.511.52012345mass ratio m₂ / m₁velocity after / u₁equal masses: exchangev₂ (target)v₁ (incoming)Ex 7.1: 8/6 and 2/6

Figure 7.2 · Derivation 7.2. For an elastic collision with the target at rest, the incoming body keeps going if it is heavier (m₂/m₁ < 1), stops if the masses are equal, and bounces back if it is lighter. The target always moves forward, at up to twice u₁.

7.3 Kinetic energy lost in a collision

The basic idea

How much kinetic energy can a collision destroy? Not all of it: the kinetic energy of the CM motion, ½Mv_cm², must survive because the CM velocity cannot change. Only the “internal” part — the energy of motion relative to the CM — is available, and a fraction (1 − e²) of it is lost. This gives a compact formula with the reduced mass μ.

Derivation 7.3 · ΔK = ½μ(1 − e²)u_rel²
  1. Kinetic energy splits as \(K=\tfrac12Mv_{\text{cm}}^2+\tfrac12\mu u_{\text{rel}}^2\), with \(\mu=\dfrac{m_1m_2}{m_1+m_2}\) and \(u_{\text{rel}}=u_1-u_2\) (proved in Chapter 9) (Figure 7.3).
  2. The collision keeps \(v_{\text{cm}}\) and multiplies the relative velocity by −e.
  3. So the internal energy becomes \(\tfrac12\mu e^2u_{\text{rel}}^2\), and the loss is \(\Delta K=\tfrac12\mu(1-e^2)u_{\text{rel}}^2\).
  4. Perfectly inelastic: all the internal energy, \(\tfrac12\mu u_{\text{rel}}^2\), is lost.
\[ \Delta K=\tfrac12\,\frac{m_1m_2}{m_1+m_2}\,(1-e^2)\,(u_1-u_2)^2 . \]
00.250.50.75100.250.50.751coefficient of restitution efraction of internal KE loststicking: all of ½μu²e = 0.5: 75% (Ex 7.3: 9 J of 12 J)elastic: none

Figure 7.3 · Derivation 7.3. Only the energy of relative motion, ½μu_rel², can be lost; the CM’s kinetic energy survives every collision. A fraction 1 − e² of the relative energy is lost: all of it when the bodies stick, none in an elastic collision.

7.4 A ball bouncing on the floor

The basic idea

A ball dropped onto a hard floor hits it at speed u and leaves at eu (the floor is effectively infinitely massive). Each rebound height is therefore e² times the previous one, and each flight time is e times the previous. The heights and times form geometric series: the ball makes infinitely many bounces, yet travels a finite total distance and comes to rest in a finite time.

Derivation 7.4 · Heights, total distance and total time
  1. Dropped from h: arrives at \(u=\sqrt{2gh}\), leaves at eu, rises to \(e^2h\) (Figure 7.4). After n bounces: \(h_n=e^{2n}h\).
  2. Total distance: \(h+2e^2h+2e^4h+\dots=h\left(1+\dfrac{2e^2}{1-e^2}\right)=h\dfrac{1+e^2}{1-e^2}\).
  3. Time to first impact \(t_0=\sqrt{2h/g}\); each later up-and-down takes \(2e^nt_0\).
  4. Total time: \(t_0\left(1+\dfrac{2e}{1-e}\right)=t_0\dfrac{1+e}{1-e}\).
  5. Measuring e: \(e=\sqrt{h_1/h}\).
\[ \begin{gathered} h_n=e^{2n}h \\[4pt] s_{\text{total}}=h\,\frac{1+e^2}{1-e^2} \\[4pt] t_{\text{total}}=\sqrt{\frac{2h}{g}}\,\frac{1+e}{1-e} \end{gathered} \]
0246810011.414234t (s)height (m)h₁ = e²h = 2.5 m0.625 mrests at 4.24 sdropped from 10 m, e = 0.5

Figure 7.4 · Derivation 7.4 (Example 7.4). Each rebound height is e² times the last and each flight time e times the last. The series converge: the ball travels h(1 + e²)/(1 − e²) = 16.7 m in all and comes to rest after 4.24 s.

Solved examples 7.1–7.6

Example 7.1

L2 Basic application
Problem
A 2 kg ball moving at 6 m/s collides elastically head-on with a 1 kg ball at rest. Find the velocities after the collision.
Concepts tested
Elastic collision, target at rest
Given
m₁ = 2 kg, u₁ = 6 m/s, m₂ = 1 kg, u₂ = 0, e = 1
To find
v₁, v₂
Diagram or graph
Figure 7.2
Sign convention
Direction of u₁ positive
Method
Derivation 7.2.
Detailed solution
  1. \(v_1=\dfrac{2-1}{3}(6)=2\) m/s.
  2. \(v_2=\dfrac{2(2)}{3}(6)=8\) m/s.
  3. Checks: momentum 4 + 8 = 12 ✓; KE 4 + 32 = 36 ✓; separation 6 = approach ✓.
Justification
Derivation 7.2
Calculation
2 m/s; 8 m/s
Answer
2 m/s and 8 m/s, both forward
Interpretation
The heavier ball keeps going; the lighter flies off faster than the original speed.
Alternative method
—
Common trap
Assuming velocities exchange (only for equal masses).
Recognise it
“Elastic”, one body at rest.

Example 7.2

L2 Basic application
Problem
The same balls (2 kg at 6 m/s, 1 kg at rest) collide and stick together. Find the common velocity and the kinetic energy lost.
Concepts tested
Perfectly inelastic collision
Given
e = 0
To find
v, ΔK
Diagram or graph
Figure 7.3
Sign convention
Direction of u₁ positive
Method
Momentum; then compare KE.
Detailed solution
  1. \(v=\dfrac{2\times6}{3}=4\) m/s.
  2. \(K_i=36\) J, \(K_f=\tfrac12(3)(16)=24\) J: \(\Delta K=12\) J.
  3. Formula: \(\tfrac12\cdot\tfrac23\cdot36=12\) J ✓.
Justification
Derivations 7.1 and 7.3
Calculation
4 m/s; 12 J
Answer
4 m/s; 12 J lost
Interpretation
One-third of the energy is lost; the rest is the CM’s kinetic energy, which cannot be lost.
Alternative method
—
Common trap
Assuming all the kinetic energy is lost.
Recognise it
“Stick together”, “coalesce”.

Example 7.3

L3 JEE Main
Problem
The same balls collide with e = 0.5. Find the velocities after impact and the kinetic energy lost.
Concepts tested
General e
Given
m₁ = 2, u₁ = 6, m₂ = 1, u₂ = 0, e = 0.5
To find
v₁, v₂, ΔK
Diagram or graph
Figure 7.1
Sign convention
Direction of u₁ positive
Method
Derivation 7.1; Derivation 7.3.
Detailed solution
  1. \(v_1=\dfrac{(2-0.5)(6)}{3}=3\) m/s.
  2. \(v_2=\dfrac{(1+0.5)(2)(6)}{3}=6\) m/s.
  3. Check: \(v_2-v_1=3=0.5\times6\) ✓; momentum 6 + 6 = 12 ✓.
  4. \(\Delta K=\tfrac12\cdot\tfrac23(1-0.25)(36)=9\) J (36 − 9 − 18 = 9 ✓).
Justification
Derivations 7.1 and 7.3
Calculation
3 m/s; 6 m/s; 9 J
Answer
3 m/s and 6 m/s; 9 J lost
Interpretation
Between the elastic (0 J) and perfectly inelastic (12 J) cases, as expected: 12 × (1 − e²) = 9 J.
Alternative method
Write momentum and restitution as two equations and solve.
Common trap
Restitution written with velocities in the wrong order.
Recognise it
e between 0 and 1 given.

Example 7.4

L3 JEE Main
Problem
A ball is dropped from 10 m onto a floor with e = 0.5. Find the height of the first rebound, the total distance travelled and the total time before it comes to rest.
Concepts tested
Geometric series of bounces
Given
h = 10 m, e = 0.5
To find
h₁, distance, time
Diagram or graph
Figure 7.4
Sign convention
—
Method
Derivation 7.4.
Detailed solution
  1. \(h_1=e^2h=2.5\) m.
  2. Distance: \(10\times\dfrac{1.25}{0.75}=16.7\) m.
  3. \(t_0=\sqrt{2}=1.414\) s; total time \(1.414\times\dfrac{1.5}{0.5}=4.24\) s.
Justification
Derivation 7.4
Calculation
2.5 m; 16.7 m; 4.24 s
Answer
2.5 m; 16.7 m; 4.24 s
Interpretation
Infinitely many bounces, but a finite distance and time.
Alternative method
—
Common trap
Rebound height e·h instead of e²h.
Recognise it
Bouncing ball with e.

Example 7.5

L4 Advanced
Problem
Ball A (1 kg) moving at 4 m/s hits ball B (3 kg) at rest head-on, elastically. B then hits a wall ahead of it elastically and comes back. Will B collide with A again?
Concepts tested
Sequence of elastic collisions
Given
m_A = 1 kg, u = 4 m/s, m_B = 3 kg; elastic throughout
To find
Whether a second A–B collision occurs
Sign convention
Original direction positive
Method
Derivation 7.2; then compare velocities after the wall.
Detailed solution
  1. \(v_A=\dfrac{1-3}{4}(4)=-2\) m/s; \(v_B=\dfrac{2}{4}(4)=+2\) m/s.
  2. B rebounds from the wall: −2 m/s.
  3. A is already moving at −2 m/s, away from the wall, at the same speed.
  4. The gap between them never closes: no second collision.
Justification
Derivation 7.2
Calculation
Both −2 m/s
Answer
No: after B’s rebound both move away from the wall at 2 m/s
Interpretation
1 : 3 is the borderline: if B were lighter than 3 kg it would come back faster than A and hit it again; if heavier, it would never catch A.
Why this method
After each collision, compare the velocities directly instead of tracking positions.
Common trap
Assuming B must catch A because it is heading the same way.
Recognise it
Collision followed by a bounce off a wall.

Example 7.6

L5 Advanced challenge
Problem
A small ball of mass m rests on top of a large ball of mass 3m (with a tiny gap); they are dropped together from a height of 0.5 m onto a hard floor. All collisions are elastic. How high does the small ball rise?
Concepts tested
Successive elastic collisions; frame of the large ball
Given
m and 3m; h = 0.5 m; e = 1
To find
Height reached by the small ball
Sign convention
Up positive
Method
Large ball bounces off the floor first, then meets the falling small ball.
Detailed solution
  1. Both reach the floor at \(u=\sqrt{2gh}=\sqrt{10}=3.16\) m/s.
  2. The large ball rebounds at +u and meets the small ball, still moving at −u.
  3. Small ball: \(v_1=\dfrac{(m-3m)(-u)+2(3m)(u)}{4m}=\dfrac{2u+6u}{4}=2u\).
  4. Large ball: \(v_2=\dfrac{(3m-m)u+2m(-u)}{4m}=0\): it stops dead.
  5. Small ball rises \(\dfrac{(2u)^2}{2g}=4h=2\) m.
Justification
Derivation 7.1
Calculation
2 m
Answer
2 m (four times the drop height)
Interpretation
All the kinetic energy (both balls’ 4mgh) ends up in the small ball: 4mgh = mg(4h) ✓. For a very heavy lower ball the factor would be 9.
Why this method
Quote the general formula with u₂ ≠ 0 rather than changing frames.
Common trap
Letting both balls hit the floor at the same instant and rebound at u.
Recognise it
Stacked balls dropped together.

Exercise 7

Q7.1L1Single correct · equal masses · 1 min

A ball collides elastically head-on with an identical ball at rest. Afterwards

(A) both move at half the speed(B) the first stops and the second moves with the original speed(C) the first bounces back(D) both stop
Solution
(B).
Q7.2L1Numerical · perfectly inelastic e · 1 min

What is the coefficient of restitution for a collision in which the bodies stick together?

Solution
0.
Q7.3L2Numerical · sticking · 1 min

A 3 kg body at 4 m/s sticks to a 1 kg body at rest. Find the common speed.

Solution
3 m/s.
Q7.4L2Numerical · e from heights · 1 min

A ball dropped from 2 m rebounds to 0.5 m. Find e.

Solution
\(\sqrt{0.25}=\) 0.5.
Q7.5L3Numerical · e = 0.5 · 2 min

A 1 kg ball at 4 m/s hits an identical ball at rest head-on with e = 0.5. Find both velocities after impact.

Solution
\(v_1=\dfrac{0.5(4)}{2}=\) 1 m/s; \(v_2=\dfrac{1.5(4)}{2}=\) 3 m/s.
Q7.6L3Numerical · energy lost · 1 min

Find the kinetic energy lost in Q7.3.

Solution
\(24-18=\) 6 J.
Q7.7L4Numerical · total distance · 2 min

A ball is dropped from 5 m on a floor with e = 0.6. Find the total distance it travels.

Solution
\(5\times\dfrac{1.36}{0.64}=\) 10.6 m.
Q7.8L5Numerical · energy transfer · 2 min

A 1 kg ball collides elastically head-on with a 4 kg ball at rest. What fraction of its kinetic energy does it transfer?

Solution
\(\dfrac{4(1)(4)}{25}=\) 0.64.

Chapter 8 · Collisions in two dimensions

8.1 Momentum as a vector: bodies that stick

The basic idea

In a collision that is not head-on, momentum is conserved as a vector: separately in x and in y. If two bodies stick together, the combined body moves along the direction of the total momentum, which is found by adding the two momentum vectors. The combined speed is always less than you might guess from adding the speeds, and some kinetic energy is lost.

Derivation 8.1 · Perfectly inelastic collision in two dimensions
  1. m₁ with \(\vec u_1\), m₂ with \(\vec u_2\); they stick (Figure 8.1).
  2. x: \(m_1u_{1x}+m_2u_{2x}=(m_1+m_2)V_x\); y: similarly.
  3. \(\vec V=\dfrac{m_1\vec u_1+m_2\vec u_2}{m_1+m_2}\) — the CM velocity, unchanged by the collision.
  4. Perpendicular velocities: \(V=\dfrac{\sqrt{(m_1u_1)^2+(m_2u_2)^2}}{m_1+m_2}\), at \(\tan\phi=\dfrac{m_2u_2}{m_1u_1}\) to \(\vec u_1\).
\[ \vec V=\frac{m_1\vec u_1+m_2\vec u_2}{m_1+m_2} . \]
p₁ = 6 (east)p₂ = 6 (north)P = (6, 6)45°V = P/(m₁ + m₂) = 1.70 m/s

Figure 8.1 · Derivation 8.1 (Example 8.1). The combined body carries the total momentum, the vector sum of the two momenta. Here they are equal and perpendicular, so it moves at 45° with V = |P|/5 kg = 1.70 m/s.

8.2 Elastic collision of equal masses: the 90° rule

The basic idea

A snooker player knows that after a glancing hit the cue ball and the object ball fly apart at a right angle. This is a consequence of momentum and energy conservation for two equal masses, one initially at rest, in an elastic collision: the momentum vectors form a triangle whose sides obey Pythagoras’s theorem, so the angle between the outgoing velocities is 90°.

Derivation 8.2 · Equal masses, elastic, target at rest: 90° separation
  1. Momentum (divide by m): \(\vec u=\vec v_1+\vec v_2\) (Figure 8.2).
  2. Energy (divide by m/2): \(u^2=v_1^2+v_2^2\).
  3. Square the first: \(u^2=v_1^2+v_2^2+2\vec v_1\cdot\vec v_2\).
  4. Compare: \(\vec v_1\cdot\vec v_2=0\): the two velocities are perpendicular (unless one is zero — the head-on case).
  5. If the incoming ball is deflected by θ: \(v_1=u\cos\theta\), \(v_2=u\sin\theta\), the target moving at 90° − θ on the other side.
\[ \begin{gathered} \vec v_1\perp\vec v_2 \\[4pt] v_1=u\cos\theta,\quad v_2=u\sin\theta \end{gathered} \]
uv₁ = u cos θv₂ = u sin θθu = v₁ + v₂u² = v₁² + v₂²⇒ v₁ ⊥ v₂

Figure 8.2 · Derivation 8.2 (Example 8.2). For equal masses momentum gives u = v₁ + v₂ (a vector triangle) and energy gives u² = v₁² + v₂² (Pythagoras). So the triangle has a right angle: the two balls move off at 90° to each other.

8.3 Oblique collision of smooth spheres

The basic idea

When two smooth spheres collide obliquely, the contact force acts along the line of centres (the line joining the centres at the moment of impact); there is no friction to act sideways. So along the line of centres the collision behaves exactly like a one-dimensional collision with coefficient e, while the velocity components perpendicular to that line are unchanged for each sphere. Resolve, apply the 1-D formulas along the line, and recombine.

Derivation 8.3 · Resolving along and across the line of centres
  1. Sphere A (m₁) moves at u at angle θ to the line of centres; B (m₂) is at rest (Figure 8.3).
  2. Along the line: A has \(u\cos\theta\), B has 0. Apply Derivation 7.1: \(v_{1\parallel}=\dfrac{(m_1-em_2)u\cos\theta}{m_1+m_2}\), \(v_{2\parallel}=\dfrac{(1+e)m_1u\cos\theta}{m_1+m_2}\).
  3. Across the line: A keeps \(u\sin\theta\); B gets nothing (no tangential force on smooth spheres).
  4. B moves off along the line of centres; A’s final velocity is the vector sum of its two components.
  5. Equal masses, e = 1: \(v_{1\parallel}=0\), so A moves at \(u\sin\theta\) perpendicular to the line and B at \(u\cos\theta\) along it — the 90° rule again.
\[ \begin{gathered} \text{along the line: 1-D collision with }e \\[4pt] \text{across it: components unchanged} \end{gathered} \]
ABline of centresuθB moves along the lineu cos θu sin θalong: 1-D with eacross: unchanged

Figure 8.3 · Derivation 8.3 (Example 8.4). Smooth spheres push each other only along the line of centres. Resolve A’s velocity along that line (treated as a 1-D collision with e) and across it (unchanged). B moves off along the line of centres.

8.4 A ball striking a fixed smooth surface obliquely

The basic idea

A ball bouncing off a smooth floor or wall is the oblique collision of Section 8.3 with an infinitely heavy, immovable partner. The velocity component along the surface is unchanged; the component along the normal is reversed and multiplied by e. Unless e = 1, the ball leaves at a flatter angle than it arrived, with a lower speed.

Derivation 8.4 · Rebound angle and speed
  1. Incoming speed u at angle θ to the normal; components \(u\sin\theta\) (along the surface) and \(u\cos\theta\) (normal) (Figure 8.4).
  2. After: along the surface \(u\sin\theta\); normal \(eu\cos\theta\), reversed.
  3. Rebound angle to the normal: \(\tan\theta’=\dfrac{\tan\theta}{e}\).
  4. Rebound speed: \(v=u\sqrt{\sin^2\theta+e^2\cos^2\theta}\).
  5. Impulse (normal): \(J=mu\cos\theta(1+e)\).
\[ \begin{gathered} \tan\theta’=\frac{\tan\theta}{e} \\[4pt] v=u\sqrt{\sin^2\theta+e^2\cos^2\theta} \\[4pt] J=(1+e)mu\cos\theta \end{gathered} \]
uvθθ′along the floor: unchangednormal: × e, reversedtan θ′ = tan θ / e

Figure 8.4 · Derivation 8.4 (Example 8.3). A smooth floor cannot change the velocity component along it; the normal component is reversed and scaled by e. The ball leaves at a flatter angle, tan θ′ = tan θ/e, and with a lower speed.

Solved examples 8.1–8.6

Example 8.1

L2 Basic application
Problem
A 2 kg body moving east at 3 m/s collides and sticks with a 3 kg body moving north at 2 m/s. Find the velocity of the combined body and the kinetic energy lost.
Concepts tested
2-D perfectly inelastic collision
Given
2 kg, 3 m/s east; 3 kg, 2 m/s north
To find
\(\vec V\); ΔK
Diagram or graph
Figure 8.1
Sign convention
East = x, north = y
Method
Derivation 8.1.
Detailed solution
  1. Momentum: (6, 6) kg m/s.
  2. \(\vec V=(1.2,1.2)\) m/s: speed \(1.70\) m/s, 45° north of east.
  3. \(K_i=9+6=15\) J; \(K_f=\tfrac12(5)(2.88)=7.2\) J; lost 7.8 J.
Justification
Derivation 8.1
Calculation
1.70 m/s at 45°; 7.8 J
Answer
1.70 m/s, 45° north of east; 7.8 J lost
Interpretation
Equal momenta in the two directions give 45°, even though the speeds differ.
Alternative method
—
Common trap
Adding the speeds or averaging the directions.
Recognise it
Bodies moving at right angles stick together.

Example 8.2

L3 JEE Main
Problem
A ball moving at 10 m/s collides elastically with an identical ball at rest and is deflected through 30°. Find the speeds of both balls and the direction of the second.
Concepts tested
90° rule
Given
u = 10 m/s, equal masses, e = 1, θ = 30°
To find
v₁, v₂, direction of v₂
Diagram or graph
Figure 8.2
Sign convention
Original direction as reference
Method
Derivation 8.2.
Detailed solution
  1. \(v_1=10\cos30^\circ=8.66\) m/s at 30°.
  2. \(v_2=10\sin30^\circ=5\) m/s at 60° on the other side (90° from \(\vec v_1\)).
  3. Check: \(8.66^2+5^2=100\) ✓; transverse momentum \(8.66\sin30^\circ-5\sin60^\circ=0\) ✓.
Justification
Derivation 8.2
Calculation
8.66 m/s; 5 m/s at 60°
Answer
8.66 m/s and 5 m/s; the struck ball moves at 60° to the original line, on the other side
Interpretation
The more glancing the hit, the less the struck ball gets.
Alternative method
—
Common trap
Splitting the speed equally.
Recognise it
Equal masses, elastic, glancing.

Example 8.3

L3 JEE Main
Problem
A ball strikes a smooth floor at 20 m/s with its velocity at 60° to the vertical; e = 0.5. Find its speed and direction after the bounce.
Concepts tested
Oblique impact on a fixed surface
Given
u = 20 m/s, θ = 60° (to the normal), e = 0.5
To find
v, θ′
Diagram or graph
Figure 8.4
Sign convention
Normal = vertical
Method
Derivation 8.4.
Detailed solution
  1. Normal: \(20\cos60^\circ=10\) m/s → 5 m/s up.
  2. Along the floor: \(20\sin60^\circ=17.32\) m/s unchanged.
  3. \(v=\sqrt{25+300}=18.0\) m/s; \(\tan\theta’=17.32/5=3.46\Rightarrow\theta’=73.9^\circ\) to the vertical.
Justification
Derivation 8.4
Calculation
18.0 m/s; 73.9°
Answer
18.0 m/s at 73.9° to the vertical (16.1° above the floor)
Interpretation
Flatter after the bounce, as tan θ′ = tan θ/e predicts.
Alternative method
—
Common trap
Reducing both components by e.
Recognise it
Bounce at an angle with e < 1.

Example 8.4

L4 Advanced
Problem
A smooth sphere A moving at 4 m/s strikes an identical sphere B at rest; at impact the line of centres makes 60° with A’s velocity. e = 1/2. Find the velocities of A and B after impact.
Concepts tested
Oblique collision of smooth spheres
Given
Equal masses, u = 4 m/s, θ = 60°, e = 0.5
To find
\(\vec v_A\), \(\vec v_B\)
Diagram or graph
Figure 8.3
Sign convention
Along / across the line of centres
Method
Derivation 8.3.
Detailed solution
  1. Along the line: A has \(4\cos60^\circ=2\) m/s; across: \(4\sin60^\circ=3.46\) m/s.
  2. 1-D, equal masses: \(v_{A\parallel}=\tfrac{1-e}{2}(2)=0.5\) m/s; \(v_{B\parallel}=\tfrac{1+e}{2}(2)=1.5\) m/s.
  3. A: \(\sqrt{0.5^2+3.46^2}=\sqrt{12.25}=3.5\) m/s, at \(\tan^{-1}(3.46/0.5)=81.8^\circ\) to the line of centres.
  4. B: 1.5 m/s along the line of centres.
Justification
Derivation 8.3
Calculation
3.5 m/s; 1.5 m/s
Answer
A 3.5 m/s at 81.8° to the line of centres; B 1.5 m/s along it
Interpretation
B always moves off along the line of centres, whatever e.
Why this method
Never resolve along the original velocity: resolve along the line of centres.
Common trap
Applying e to the whole velocity of A.
Recognise it
“Line of centres makes an angle”.

Example 8.5

L4 Advanced
Problem
A body at rest explodes into three equal pieces. Two fly off at 3 m/s in perpendicular directions. Find the velocity of the third.
Concepts tested
Zero total momentum in 2-D
Given
Two pieces 3 m/s, at 90°
To find
\(\vec v_3\)
Sign convention
Pieces along +x and +y
Method
\(\vec v_3=-(\vec v_1+\vec v_2)\).
Detailed solution
  1. \(\vec v_1+\vec v_2=(3,3)\) m/s.
  2. \(\vec v_3=(-3,-3)\) m/s: \(3\sqrt2=4.24\) m/s.
  3. Direction: 135° from each of the other two.
Justification
Derivation 8.1
Calculation
4.24 m/s
Answer
4.24 m/s, at 135° to each of the other pieces
Interpretation
The three momentum vectors close a triangle.
Why this method
Write the momentum triangle instead of components.
Common trap
Assuming the third piece also moves at 3 m/s.
Recognise it
Explosion into three pieces.

Example 8.6

L5 Advanced challenge
Problem
A ball is thrown at 20 m/s at 45° toward a smooth vertical wall 10 m away. It bounces off the wall with e = 0.5. Where does it land, relative to the throwing point (level ground)?
Concepts tested
Oblique impact with a wall during projectile motion
Given
u = 20 m/s, 45°, wall at 10 m, e = 0.5
To find
Landing point
Sign convention
Toward the wall positive
Method
The wall reverses and scales only the horizontal velocity; the vertical motion is untouched.
Detailed solution
  1. Components: 14.14 m/s each. Time of flight (unaffected by the wall): \(2\times14.14/10=2.83\) s.
  2. Time to reach the wall: \(10/14.14=0.707\) s (height there \(10-2.5=7.5\) m, so it does hit the wall).
  3. After the bounce: horizontal \(0.5\times14.14=7.07\) m/s back, for \(2.83-0.707=2.12\) s: 15 m.
  4. Landing point: \(10-15=-5\) m.
Justification
Derivation 8.4
Calculation
5 m behind the thrower
Answer
5 m behind the throwing point (15 m from the wall)
Interpretation
A smooth wall cannot change the vertical velocity, so the flight time is the same as without the wall.
Why this method
Fold the motion: the wall only rescales the horizontal speed after the impact.
Common trap
Restarting the projectile motion at the wall with a new launch angle.
Recognise it
Projectile hitting a vertical wall.

Exercise 8

Q8.1L1Single correct · equal masses · 1 min

After an oblique elastic collision between equal masses, one initially at rest, the angle between their velocities is

(A) 0°(B) 45°(C) 90°(D) 180°
Solution
(C).
Q8.2L2Numerical · sticking at right angles · 1 min

A 1 kg body moving east at 4 m/s sticks to a 1 kg body moving north at 3 m/s. Find the combined speed.

Solution
\(5/2=\) 2.5 m/s.
Q8.3L2Numerical · wall impulse · 1 min

A 0.2 kg ball hits a smooth wall elastically at 10 m/s, at 45° to the normal. Find the impulse.

Solution
\(2(0.2)(10)(0.707)=\) 2.83 N s.
Q8.4L3Numerical · floor bounce · 2 min

A ball hits a smooth floor at 8 m/s, at 45° to the floor, with e = 0.5. Find its speed after the bounce and the angle it makes with the floor.

Solution
Components 5.66 (along) and 2.83 (normal): 6.32 m/s at 26.6° to the floor.
Q8.5L3Numerical · three-piece explosion · 1 min

A 3 kg body at rest explodes into three 1 kg pieces; two move at 4 m/s east and 3 m/s north. Find the speed of the third.

Solution
5 m/s, toward the south-west (opposite to (4, 3)).
Q8.6L4Numerical · deflection by 60° · 2 min

A ball at 6 m/s hits an identical ball at rest elastically and is deflected through 60°. Find both speeds.

Solution
\(6\cos60^\circ=\) 3 m/s; \(6\sin60^\circ=\) 5.20 m/s (at 30° on the other side).
Q8.7L4Numerical · line of centres · 2 min

A smooth sphere at 2 m/s hits an identical sphere at rest elastically, the line of centres making 30° with its velocity. Find both final velocities.

Solution
B: \(2\cos30^\circ=\) 1.73 m/s along the line; A: \(2\sin30^\circ=\) 1 m/s perpendicular to it.
Q8.8L5Numerical · wall at 15 m · 3 min

A ball is thrown at 20 m/s at 45° toward a smooth vertical wall 15 m away and rebounds with e = 1/3. Where does it land relative to the thrower?

Solution
Reaches the wall at 1.061 s; remaining 1.768 s at 4.71 m/s back: 8.33 m: lands 6.67 m in front of the thrower.

Chapter 9 · The centre-of-mass frame and the energy of a system

9.1 Kinetic energy of a system: CM part plus internal part

The basic idea

The CM frame is the frame that moves with the centre of mass. In it the total momentum is zero, so the system looks “balanced”: in a collision the bodies come in from opposite sides and go out to opposite sides. The kinetic energy measured in any inertial frame splits neatly into two parts: the kinetic energy of the whole mass moving with the CM, ½Mv_cm², and the kinetic energy of the motion relative to the CM. The first part is fixed by the total momentum and cannot be changed by internal forces; only the second part can be turned into heat, springs or explosions.

Derivation 9.1 · K = ½Mv_cm² + K′ (König’s theorem)
  1. Velocity of particle i relative to the CM: \(\vec v_i’=\vec v_i-\vec v_{\text{cm}}\) (Figure 9.1). Then \(\sum m_i\vec v_i’=M\vec v_{\text{cm}}-M\vec v_{\text{cm}}=0\).
  2. \(K=\sum\tfrac12m_i(\vec v_{\text{cm}}+\vec v_i’)^2=\tfrac12Mv_{\text{cm}}^2+\vec v_{\text{cm}}\cdot\sum m_i\vec v_i’+\sum\tfrac12m_iv_i’^2\).
  3. The middle term vanishes (step 1).
  4. So \(K=\tfrac12Mv_{\text{cm}}^2+K’\), with \(K’\) the kinetic energy in the CM frame.
  5. With no external force \(v_{\text{cm}}\) is constant, so \(\tfrac12Mv_{\text{cm}}^2\) can never be lost.
\[ \begin{gathered} K=\tfrac12Mv_{\text{cm}}^2+K’ \\[4pt] K’=\sum\tfrac12m_iv_i’^2 \end{gathered} \]
particle ivcmv′ᵢvᵢvᵢ = vcm + v′ᵢΣ mᵢ v′ᵢ = 0K = ½Mvcm² + K′

Figure 9.1 · Derivation 9.1. Each velocity is the CM velocity plus the velocity relative to the CM. Because the relative momenta add to zero, the cross term in the kinetic energy vanishes: K = ½Mv_cm² + K′.

9.2 Two bodies: the reduced mass

The basic idea

For two bodies, the internal kinetic energy depends only on their relative velocity: \(K’=\tfrac12\mu v_{\text{rel}}^2\), where \(\mu=m_1m_2/(m_1+m_2)\) is the reduced mass. The reduced mass is less than either mass; for equal masses it is half of one of them, and for a light body against a heavy one it is almost the light body’s mass. This one formula gives the energy lost in a sticking collision, the energy stored in a spring between two free blocks, and the energy needed to separate two bodies.

Derivation 9.2 · K′ = ½μv_rel²
  1. \(\vec v_{\text{cm}}=\dfrac{m_1\vec v_1+m_2\vec v_2}{m_1+m_2}\), \(\vec v_{\text{rel}}=\vec v_1-\vec v_2\) (Figure 9.2).
  2. \(\vec v_1’=\vec v_1-\vec v_{\text{cm}}=\dfrac{m_2}{m_1+m_2}\vec v_{\text{rel}}\), \(\vec v_2’=-\dfrac{m_1}{m_1+m_2}\vec v_{\text{rel}}\).
  3. \(K’=\tfrac12m_1v_1’^2+\tfrac12m_2v_2’^2=\tfrac12\dfrac{m_1m_2^2+m_2m_1^2}{(m_1+m_2)^2}v_{\text{rel}}^2=\tfrac12\mu v_{\text{rel}}^2\).
  4. Hence \(K=\tfrac12Mv_{\text{cm}}^2+\tfrac12\mu v_{\text{rel}}^2\).
\[ \begin{gathered} \mu=\frac{m_1m_2}{m_1+m_2} \\[4pt] K’=\tfrac12\mu v_{\text{rel}}^2 \\[4pt] K=\tfrac12Mv_{\text{cm}}^2+\tfrac12\mu v_{\text{rel}}^2 \end{gathered} \]
2 kg: 53 kg: 0ground+3−2CM frameK′ = ½μvrel² = ½(1.2)(25) = 15 J

Figure 9.2 · Derivation 9.2 (Example 9.1). In the CM frame (v_cm = 2 m/s) the bodies approach each other at +3 and −2 m/s, with zero total momentum. Their kinetic energy there, 15 J, equals ½μv_rel² with μ = 1.2 kg.

9.3 Collisions seen from the CM frame

The basic idea

In the CM frame an elastic head-on collision is beautifully simple: each body just reverses its velocity, keeping its speed. (Momentum stays zero and kinetic energy stays the same.) For a collision with coefficient e, each velocity reverses and shrinks by the factor e. To get the answer in the ground frame, transform into the CM frame, reverse, and transform back.

Derivation 9.3 · Elastic collision by the CM-frame method
  1. Find \(v_{\text{cm}}\); subtract it from each velocity (Figure 9.3).
  2. In the CM frame: \(v_i’\to-ev_i’\) (elastic: e = 1).
  3. Add \(v_{\text{cm}}\) back: \(v_i=v_{\text{cm}}-e(u_i-v_{\text{cm}})=(1+e)v_{\text{cm}}-eu_i\).
  4. Elastic: \(v_i=2v_{\text{cm}}-u_i\). Example: 1 kg at 5 m/s, 4 kg at rest: v_cm = 1: \(v_1=2-5=-3\), \(v_2=2-0=2\) m/s.
\[ \begin{gathered} v_i=(1+e)\,v_{\text{cm}}-e\,u_i \\[4pt] \text{elastic: }v_i=2v_{\text{cm}}-u_i \end{gathered} \]
CM frame (vcm = 1 m/s)+4−1before−4+1after: reversedground: add vcm back ⇒1 kg: −4 + 1 = −3 m/s; 4 kg: 1 + 1 = 2 m/s

Figure 9.3 · Derivation 9.3 (Example 9.3). Subtract v_cm, reverse every velocity (multiply by −e in general), and add v_cm back. For 1 kg at 5 m/s hitting 4 kg at rest elastically this gives −3 m/s and +2 m/s.

9.4 Two bodies joined by a spring

The basic idea

Give one of two spring-joined blocks a kick. In the ground frame the motion looks complicated: the blocks lurch forward in turn. In the CM frame it is simple: the CM drifts at constant velocity while the two blocks oscillate about it, out of step, like a single mass μ on the spring. The maximum compression uses the internal energy ½μv_rel², and the oscillation has angular frequency \(\sqrt{k/\mu}\).

Derivation 9.4 · Oscillation of a spring between two free bodies
  1. Separation x (extension from natural length): \(m_1\ddot x_1=kx\), \(m_2\ddot x_2=-kx\) with \(x=x_2-x_1-\ell\) (Figure 9.4).
  2. \(\ddot x=\ddot x_2-\ddot x_1=-kx\left(\dfrac1{m_1}+\dfrac1{m_2}\right)=-\dfrac{k}{\mu}x\).
  3. SHM with \(\omega=\sqrt{k/\mu}\), period \(T=2\pi\sqrt{\mu/k}\).
  4. Started with relative speed \(v_0\) at natural length: amplitude (max compression) \(x_{\max}=v_0\sqrt{\mu/k}\), reached after T/4.
  5. Meanwhile the CM moves steadily at \(v_{\text{cm}}\); at each return to natural length the velocities have exchanged (equal masses) or have the elastic-collision values (unequal masses).
\[ \begin{gathered} \omega=\sqrt{\frac k\mu} \\[4pt] T=2\pi\sqrt{\frac\mu k} \\[4pt] x_{\max}=v_0\sqrt{\frac\mu k} \end{gathered} \]
00.511.5200.1570.3140.4710.628t (s)velocity (m/s)struck blockother blockCM: 1 m/smax compression at T/4

Figure 9.4 · Derivation 9.4 (Example 9.5): two 2 kg blocks, k = 100 N/m, one struck to 2 m/s. The CM moves steadily at 1 m/s while the blocks oscillate about it with ω = √(k/μ) = 10 rad/s. The spring is most compressed at T/4 = 0.157 s, when both move at v_cm.

Solved examples 9.1–9.6

Example 9.1

L2 Basic application
Problem
A 2 kg body moves at 5 m/s toward a 3 kg body at rest. Split their kinetic energy into the CM part and the internal part.
Concepts tested
König’s theorem with the reduced mass
Given
2 kg at 5 m/s; 3 kg at 0
To find
\(\tfrac12Mv_{\text{cm}}^2\), K′
Diagram or graph
Figure 9.2
Sign convention
—
Method
Derivations 9.1 and 9.2.
Detailed solution
  1. \(v_{\text{cm}}=10/5=2\) m/s: \(\tfrac12(5)(4)=10\) J.
  2. μ = 6/5 = 1.2 kg: \(K’=\tfrac12(1.2)(25)=15\) J.
  3. Total \(25\) J \(=\tfrac12(2)(25)\) ✓.
Justification
Derivations 9.1 and 9.2
Calculation
10 J; 15 J
Answer
10 J (CM) + 15 J (internal) = 25 J
Interpretation
At most 15 J can be lost in any collision between them.
Alternative method
—
Common trap
Assuming the whole 25 J can be lost.
Recognise it
Energy split; “maximum energy that can be lost”.

Example 9.2

L3 JEE Main
Problem
Blocks of 1 kg and 3 kg on a smooth floor are joined by a spring (k = 300 N/m) at its natural length. The 1 kg block is given 4 m/s toward the other. Find the maximum compression and the period of the oscillation.
Concepts tested
Reduced-mass oscillator
Given
m₁ = 1, m₂ = 3 kg, k = 300 N/m, v₀ = 4 m/s
To find
\(x_{\max}\), T
Diagram or graph
Figure 9.4
Sign convention
—
Method
Derivation 9.4.
Detailed solution
  1. μ = 3/4 = 0.75 kg.
  2. \(x_{\max}=4\sqrt{0.75/300}=4\times0.05=0.2\) m.
  3. \(T=2\pi\sqrt{0.75/300}=2\pi(0.05)=0.314\) s.
Justification
Derivation 9.4
Calculation
0.2 m; 0.314 s
Answer
0.2 m; 0.314 s
Interpretation
Energy check: K′ = ½(0.75)(16) = 6 J = ½(300)(0.04) ✓.
Alternative method
—
Common trap
Using m₁ or m₁ + m₂ in place of μ.
Recognise it
Two free blocks and a spring.

Example 9.3

L3 JEE Main
Problem
A 1 kg ball at 5 m/s collides elastically head-on with a 4 kg ball at rest. Find the velocities after the collision by the CM-frame method.
Concepts tested
Reversal in the CM frame
Given
1 kg at 5 m/s; 4 kg at rest; e = 1
To find
v₁, v₂
Diagram or graph
Figure 9.3
Sign convention
Original direction positive
Method
Derivation 9.3.
Detailed solution
  1. \(v_{\text{cm}}=5/5=1\) m/s.
  2. CM frame: +4 and −1 m/s; after: −4 and +1 m/s.
  3. Ground frame: \(-4+1=-3\) m/s and \(1+1=2\) m/s.
  4. Check with Derivation 7.2: \(\tfrac{1-4}{5}(5)=-3\) and \(\tfrac{2}{5}(5)=2\) ✓.
Justification
Derivation 9.3
Calculation
−3 m/s; 2 m/s
Answer
1 kg ball: 3 m/s back; 4 kg ball: 2 m/s forward
Interpretation
In the CM frame nothing changes except directions.
Alternative method
Derivation 7.2 formulas.
Common trap
Forgetting to add v_cm back.
Recognise it
Elastic collision; quick check by the CM frame.

Example 9.4

L4 Advanced
Problem
A 0.1 kg bullet at 100 m/s embeds in a 0.9 kg block at rest on a smooth floor. Find the kinetic energy lost, using the reduced mass, and the fraction lost.
Concepts tested
Maximum loss = all internal energy
Given
m = 0.1 kg, u = 100 m/s, M = 0.9 kg
To find
ΔK, fraction
Diagram or graph
Figure 9.1
Sign convention
—
Method
\(\Delta K=\tfrac12\mu u^2\).
Detailed solution
  1. μ = 0.09/1 = 0.09 kg.
  2. \(\Delta K=\tfrac12(0.09)(10^4)=450\) J.
  3. Initial K = 500 J: 90% lost (= M/(m + M)).
  4. Check: V = 10 m/s, K_f = 50 J ✓.
Justification
Derivation 9.2
Calculation
450 J; 90%
Answer
450 J (90%)
Interpretation
Only the CM’s 50 J survives.
Why this method
½μu² gives the loss without finding the final velocity.
Common trap
Assuming only half is lost.
Recognise it
Sticking collision, “energy lost”.

Example 9.5

L4 Advanced
Problem
Two 2 kg blocks on a smooth floor are joined by a spring (k = 100 N/m) at its natural length. One block receives an impulse of 4 N s toward the other. Find the CM velocity, the maximum compression and the time taken to reach it.
Concepts tested
Impulse, then the reduced-mass oscillator
Given
m = 2 kg each, k = 100 N/m, J = 4 N s
To find
\(v_{\text{cm}}\), \(x_{\max}\), t
Diagram or graph
Figure 9.4
Sign convention
Direction of the impulse positive
Method
v = J/m; Derivation 9.4.
Detailed solution
  1. The struck block: v = 4/2 = 2 m/s; \(v_{\text{cm}}=1\) m/s.
  2. μ = 1 kg; K′ = ½(1)(4) = 2 J = ½(100)x² ⇒ x = 0.2 m.
  3. \(t=\tfrac T4=\tfrac{\pi}{2}\sqrt{\mu/k}=\tfrac{\pi}{2}(0.1)=0.157\) s.
Justification
Derivation 9.4
Calculation
1 m/s; 0.2 m; 0.157 s
Answer
1 m/s; 0.2 m; 0.157 s
Interpretation
The other 2 J (of 4 J) stays as CM kinetic energy throughout.
Why this method
Separate CM motion and internal motion from the start.
Common trap
Putting all 4 J into the spring.
Recognise it
Impulse on one of two spring-joined blocks.

Example 9.6

L5 Advanced challenge
Problem
Blocks A and B (1 kg each) rest on a smooth floor, joined by a spring of constant 200 N/m at its natural length. A third 1 kg block C, moving at 6 m/s, hits A head-on elastically. Find the maximum compression of the spring, the greatest speed B reaches, and whether C hits A again.
Concepts tested
Elastic collision, then a spring oscillator
Given
m = 1 kg each, k = 200 N/m, u = 6 m/s
To find
\(x_{\max}\); \(v_{B,\max}\); second collision?
Diagram or graph
Figure 9.4
Sign convention
Direction of C positive
Method
Equal-mass elastic collision; then Derivation 9.4.
Detailed solution
  1. C and A exchange velocities: C stops, A moves at 6 m/s (the spring has no time to act during the impact).
  2. A–B system: v_cm = 3 m/s; μ = 0.5 kg; K′ = ½(0.5)(36) = 9 J.
  3. \(\tfrac12(200)x^2=9\Rightarrow x_{\max}=0.3\) m.
  4. At the next natural length the velocities have exchanged: A 0, B 6 m/s — B’s greatest speed.
  5. A’s velocity is \(3+3\cos\omega t\ge0\) at all times, so A never moves back toward C, which is at rest: no second collision.
Justification
Derivations 7.2 and 9.4
Calculation
0.3 m; 6 m/s; no
Answer
0.3 m; 6 m/s; C never hits A again
Interpretation
A and B take turns carrying the 6 m/s while their CM moves steadily at 3 m/s.
Why this method
Treat the impact and the spring motion as two separate stages.
Common trap
Letting the spring act during the impact (C, A and B together).
Recognise it
Block hits one end of a spring-joined pair.

Exercise 9

Q9.1L1Single correct · CM frame · 1 min

In the CM frame of a system the total momentum is

(A) Mv_cm(B) zero(C) equal to the total kinetic energy(D) the same as in the ground frame
Solution
(B).
Q9.2L2Numerical · reduced mass · 1 min

Find the reduced mass of bodies of 2 kg and 3 kg.

Solution
1.2 kg.
Q9.3L2Numerical · internal energy · 1 min

A 1 kg body moves at 6 m/s toward a 2 kg body at rest. Find their kinetic energy in the CM frame.

Solution
\(\tfrac12\cdot\tfrac23\cdot36=\) 12 J.
Q9.4L3Numerical · maximum loss · 1 min

What is the largest kinetic energy that can be lost in a collision between the bodies of Q9.3?

Solution
12 J (if they stick).
Q9.5L3Numerical · head-on equal masses · 1 min

Two 4 kg bodies move toward each other at 3 m/s each and stick. How much kinetic energy is lost?

Solution
v_cm = 0: all of it, 36 J.
Q9.6L4Numerical · spring compression · 2 min

Two 1 kg blocks are joined by a spring (k = 400 N/m). One is given 4 m/s toward the other. Find the maximum compression.

Solution
μ = 0.5: \(4\sqrt{0.5/400}=\) 0.141 m.
Q9.7L4Numerical · period · 1 min

Find the period of oscillation of blocks of 2 kg and 3 kg joined by a spring of constant 120 N/m on a smooth floor.

Solution
\(2\pi\sqrt{1.2/120}=\) 0.628 s.
Q9.8L5Numerical · velocities at natural length · 2 min

In Q9.6, find the velocities of the two blocks the next time the spring is at its natural length.

Solution
Equal masses: they have exchanged velocities: 0 and 4 m/s.

Chapter 10 · Systems of variable mass

10.1 The equation of motion when mass flows in or out

The basic idea

A rocket throws mass out backward; a conveyor belt picks up sand; a raindrop gathers vapour. For such bodies F = ma must be used with care, because the mass being added or removed carries momentum of its own. The correct equation follows from applying momentum conservation to the body plus the small parcel of mass entering or leaving it. The result is an extra force, the thrust, equal to the mass flow rate times the velocity of the flowing mass relative to the body.

Derivation 10.1 · M dv/dt = F_ext + v_rel dM/dt
  1. At time t: body of mass M, velocity v. In time dt it gains mass dM (dM < 0 if it loses mass); the parcel moves with velocity \(v+v_{\text{rel}}\) relative to the ground (Figure 10.1).
  2. Impulse–momentum for body + parcel: \(F_{\text{ext}}\,dt=(M+dM)(v+dv)-Mv-dM\,(v+v_{\text{rel}})\).
  3. Drop the second-order term dM dv: \(F_{\text{ext}}\,dt=M\,dv-v_{\text{rel}}\,dM\).
  4. So \(M\dfrac{dv}{dt}=F_{\text{ext}}+v_{\text{rel}}\dfrac{dM}{dt}\). The last term is the thrust.
  5. Rocket: dM/dt = −μ (μ = burn rate), \(v_{\text{rel}}=-u\) (exhaust backward): thrust \(=+u\mu\), forward.
  6. Mass leaving with zero relative velocity (sand leaking through the floor of a cart): no thrust, so \(M\,dv/dt=F_{\text{ext}}\).
\[ \begin{gathered} M\frac{dv}{dt}=F_{\text{ext}}+v_{\text{rel}}\frac{dM}{dt} \\[4pt] \text{rocket thrust}=u\left|\frac{dM}{dt}\right| \end{gathered} \]
M, v−dMu (relative)dvM dv/dt = Fext + vrel dM/dtthrust = u |dM/dt|

Figure 10.1 · Derivation 10.1. In time dt the rocket throws out a mass −dM backward at speed u relative to itself. Conserving the momentum of rocket + parcel gives the rocket an extra forward force, the thrust u|dM/dt|.

10.2 The rocket in free space

The basic idea

Far from any planet, a rocket has no external force. Each bit of exhaust pushed backward gives the rocket a little forward momentum. Integrating gives the rocket equation: the speed gained depends only on the exhaust speed and the ratio of the starting mass to the final mass, logarithmically. To double the speed gain you must square the mass ratio — which is why rockets are mostly fuel, and why they are built in stages.

Derivation 10.2 · v = v₀ + u ln(M₀/M)
  1. F_ext = 0, \(v_{\text{rel}}=-u\): \(M\,dv=-u\,dM\) (Figure 10.2).
  2. \(dv=-u\,\dfrac{dM}{M}\Rightarrow v-v_0=-u\ln\dfrac{M}{M_0}=u\ln\dfrac{M_0}{M}\).
  3. Speed gain equals u when \(M_0/M=e=2.718\); 2u when \(M_0/M=e^2=7.39\).
  4. The rate of burning does not matter in free space, only the mass ratio.
\[ v=v_0+u\ln\frac{M_0}{M} . \]
00.511.522.5122.718456810mass ratio M₀/Mspeed gained / uratio e: Δv = uEx 10.2: ratio 5, Δv = 1.61uΔv = u ln(M₀/M)

Figure 10.2 · Derivation 10.2. In free space the speed gained grows only as the logarithm of the mass ratio: a ratio of e gives Δv = u, a ratio of 5 gives 1.61u (Example 10.2). Large speed gains need staging.

10.3 Rocket launch against gravity

The basic idea

At launch, gravity is an external force. The rocket leaves the pad only if its thrust exceeds its weight, and its initial acceleration is (thrust − weight)/mass. As fuel burns the mass drops, so the acceleration grows. If the burn rate is constant, gravity simply subtracts gt from the free-space result.

Derivation 10.3 · Acceleration and speed with gravity
  1. \(M\dfrac{dv}{dt}=u\mu-Mg\), with \(M=M_0-\mu t\) (Figure 10.3).
  2. Lift-off needs \(u\mu>M_0g\); initial acceleration \(a_0=\dfrac{u\mu}{M_0}-g\).
  3. \(dv=\left(\dfrac{u\mu}{M_0-\mu t}-g\right)dt\Rightarrow v=u\ln\dfrac{M_0}{M_0-\mu t}-gt\).
  4. At burn-out (\(M=M_b\), time \(t_b=(M_0-M_b)/\mu\)): \(v_b=u\ln\dfrac{M_0}{M_b}-gt_b\).
\[ \begin{gathered} a_0=\frac{u\mu}{M_0}-g \\[4pt] v=u\ln\frac{M_0}{M_0-\mu t}-gt \end{gathered} \]
0500100015002000250030003500010203040t (s)v (m/s)burn-out 2819 m/sfree spacewith gravity: − gt

Figure 10.3 · Derivation 10.3 (Example 10.6). At constant burn rate the mass falls linearly, so the acceleration grows with time. Gravity subtracts gt from the free-space speed: 400 m/s by burn-out at 40 s.

10.4 Picking up mass: belts and carts

The basic idea

Sand dropped vertically onto a moving conveyor belt arrives with no horizontal velocity and must be brought up to the belt’s speed v. Each second a mass dM/dt gains momentum v dM/dt, so the belt must be pushed with an extra force F = v dM/dt to keep its speed constant. The power needed is Fv = v² dM/dt — twice the rate at which the sand gains kinetic energy; the other half becomes heat as the sand slips before it moves with the belt — the same 50 : 50 split as for any object placed on a moving belt.

Derivation 10.4 · Force and power for a belt picking up sand
  1. Sand lands at rate \(\dot m\) with zero horizontal velocity; belt speed v constant (Figure 10.4).
  2. Derivation 10.1 with \(v_{\text{rel}}=-v\), dv/dt = 0: \(0=F-v\dot m\Rightarrow F=v\dot m\).
  3. Power: \(P=Fv=\dot mv^2\). Kinetic energy given to the sand per second: \(\tfrac12\dot mv^2\). Heat per second: \(\tfrac12\dot mv^2\).
  4. No force applied (a cart coasting through vertical rain): horizontal momentum is conserved: \((M_0+\dot mt)v=M_0v_0\).
\[ \begin{gathered} F=v\frac{dm}{dt} \\[4pt] P=v^2\frac{dm}{dt}\ (\text{half kinetic energy, half heat}) \end{gathered} \]
belt vF = v dm/dtsand arrives with no horizontal velocityP = v² dm/dt: half KE, half heat

Figure 10.4 · Derivation 10.4 (Example 10.4). Each second a mass dm/dt must be brought from rest to the belt speed v, which needs a force v dm/dt. Its power v² dm/dt is shared equally between the sand’s kinetic energy and heat.

10.5 A falling chain on a weighing scale

The basic idea

Hold a chain vertically with its lower end just touching a scale pan, and let go. The scale must support the part of the chain already on the pan, and it must also stop the links arriving each second. The second effect is an impulsive force λv², and because the arriving links have fallen freely, v² = 2gx; this turns out to be exactly twice the weight already on the pan. So the scale reads three times the weight of the chain that has landed.

Derivation 10.5 · Scale reading = 3 × weight on the pan
  1. Chain of mass per length λ released from rest; after a length x has landed, the rest falls freely at \(v=\sqrt{2gx}\) (Figure 10.5).
  2. Links arriving per second: λv. Each is stopped from speed v: stopping force \(\lambda v\cdot v=\lambda v^2=2\lambda gx\).
  3. Weight already on the pan: λxg.
  4. Reading \(N=\lambda xg+2\lambda xg=3\lambda xg\). Just as the last link lands: 3Mg.
\[ N=3\lambda gx\quad(\text{three times the weight on the pan}) . \]
v = √(2gx)x on the panN = λxg + λv² = λxg + 2λxg = 3λxg

Figure 10.5 · Derivation 10.5 (Example 10.5). The scale supports the chain already on the pan (λxg) and also stops the links arriving at v = √(2gx), which needs λv² = 2λxg. The reading is three times the weight on the pan.

Solved examples 10.1–10.6

Example 10.1

L2 Basic application
Problem
A rocket’s exhaust leaves at 2 km/s relative to the rocket, and it burns 10 kg of fuel per second. Find the thrust.
Concepts tested
Thrust
Given
u = 2000 m/s, μ = 10 kg/s
To find
Thrust
Diagram or graph
Figure 10.1
Sign convention
Forward positive
Method
uμ.
Detailed solution
  1. Thrust \(=2000\times10=2\times10^4\) N.
Justification
Derivation 10.1
Calculation
20 kN
Answer
20 kN
Interpretation
It does not depend on the rocket’s own speed.
Alternative method
—
Common trap
Multiplying by the rocket’s speed instead of the exhaust’s relative speed.
Recognise it
Exhaust speed and burn rate given.

Example 10.2

L3 JEE Main
Problem
A rocket in free space has a total mass of 1000 kg, of which 800 kg is fuel; the exhaust speed is 2000 m/s. Starting from rest, what speed does it reach when all the fuel is burnt?
Concepts tested
Rocket equation
Given
M₀ = 1000 kg, M = 200 kg, u = 2000 m/s
To find
v
Diagram or graph
Figure 10.2
Sign convention
—
Method
Derivation 10.2.
Detailed solution
  1. \(v=2000\ln\dfrac{1000}{200}=2000\ln5\).
  2. \(=2000\times1.609=3219\) m/s.
Justification
Derivation 10.2
Calculation
3219 m/s
Answer
3.22 km/s
Interpretation
Even with 80% fuel, the final speed is only 1.6 times the exhaust speed.
Alternative method
—
Common trap
Using momentum conservation with all the fuel ejected at once at u.
Recognise it
Mass ratio and exhaust speed; free space.

Example 10.3

L3 JEE Main
Problem
A 5000 kg rocket with exhaust speed 800 m/s is to rise from the launch pad with an initial upward acceleration of 10 m/s². At what rate must it burn fuel?
Concepts tested
Thrust against gravity
Given
M₀ = 5000 kg, u = 800 m/s, a₀ = 10 m/s²
To find
μ
Diagram or graph
Figure 10.3
Sign convention
Up positive
Method
Derivation 10.3.
Detailed solution
  1. Thrust = \(M_0(g+a_0)=5000\times20=10^5\) N.
  2. \(\mu=10^5/800=125\) kg/s.
Justification
Derivation 10.3
Calculation
125 kg/s
Answer
125 kg/s
Interpretation
Half the thrust just holds the rocket up.
Alternative method
—
Common trap
Ignoring gravity (62.5 kg/s).
Recognise it
Launch from the ground.

Example 10.4

L3 JEE Main
Problem
Sand falls vertically onto a conveyor belt at 2 kg/s; the belt moves at a constant 3 m/s. Find the extra force and power needed, and how the power is shared.
Concepts tested
Picking up mass
Given
\(\dot m=2\) kg/s, v = 3 m/s
To find
F, P; shares
Diagram or graph
Figure 10.4
Sign convention
—
Method
Derivation 10.4.
Detailed solution
  1. \(F=v\dot m=6\) N.
  2. \(P=Fv=18\) W.
  3. Kinetic energy given to the sand: \(\tfrac12(2)(9)=9\) W; heat: 9 W.
Justification
Derivation 10.4
Calculation
6 N; 18 W; 9 W + 9 W
Answer
6 N; 18 W (9 W to kinetic energy, 9 W to heat)
Interpretation
The split does not depend on the friction between sand and belt.
Alternative method
—
Common trap
Taking P = ½ṁv² = 9 W.
Recognise it
Mass dropped onto a moving belt.

Example 10.5

L4 Advanced
Problem
A uniform chain 1 m long and of mass 2 kg is held vertically with its lower end just touching a scale pan and released. What does the scale read when 0.4 m of the chain has landed?
Concepts tested
Falling chain on a scale
Given
λ = 2 kg/m, x = 0.4 m
To find
N
Diagram or graph
Figure 10.5
Sign convention
Up positive
Method
Derivation 10.5.
Detailed solution
  1. Weight on the pan: \(\lambda xg=2\times0.4\times10=8\) N.
  2. Speed of the arriving links: \(v^2=2gx=8\): stopping force \(\lambda v^2=16\) N.
  3. Reading: 24 N = 3 × 8 N.
Justification
Derivation 10.5
Calculation
24 N
Answer
24 N
Interpretation
Just before the end it reads 60 N — three times the chain’s weight.
Why this method
N = 3 × (weight already on the pan) at every moment.
Common trap
Reading only the weight on the pan (8 N).
Recognise it
Chain falling onto a scale.

Example 10.6

L5 Advanced challenge
Problem
A 1000 kg rocket rises vertically from rest. It burns 800 kg of fuel at a steady 20 kg/s with an exhaust speed of 2000 m/s. Find its initial acceleration and its speed at burn-out (take g constant).
Concepts tested
Rocket against gravity, constant burn
Given
M₀ = 1000 kg, M_b = 200 kg, μ = 20 kg/s, u = 2000 m/s
To find
a₀, v_b
Diagram or graph
Figure 10.3
Sign convention
Up positive
Method
Derivation 10.3.
Detailed solution
  1. Thrust \(=2000\times20=40\,000\) N; weight 10 000 N: \(a_0=30\,000/1000=30\) m/s².
  2. Burn time \(t_b=800/20=40\) s.
  3. \(v_b=2000\ln5-10\times40=3219-400=2819\) m/s.
Justification
Derivation 10.3
Calculation
30 m/s²; 2819 m/s
Answer
30 m/s² initially; 2.82 km/s at burn-out
Interpretation
Gravity costs 400 m/s here; a faster burn would lose less.
Why this method
Free-space result minus g t_b.
Common trap
Forgetting gravity loss, or using the initial acceleration throughout.
Recognise it
Rocket launch with burn rate and burn time.

Exercise 10

Q10.1L1Numerical · thrust · 1 min

Find the thrust of a rocket ejecting 4 kg/s of gas at 1500 m/s relative to it.

Solution
6000 N.
Q10.2L2Numerical · belt · 1 min

Sand drops onto a belt moving at 2 m/s at a rate of 5 kg/s. Find the extra force needed.

Solution
10 N.
Q10.3L2Numerical · mass ratio · 1 min

What mass ratio M₀/M lets a rocket in free space gain a speed equal to its exhaust speed?

Solution
e = 2.72.
Q10.4L3Numerical · lift-off · 1 min

A 2000 kg rocket ejects 40 kg/s at 1000 m/s. Find its initial upward acceleration.

Solution
\((40\,000-20\,000)/2000=\) 10 m/s².
Q10.5L3Numerical · chain on a scale · 2 min

A 1.5 kg chain is released vertically onto a scale pan as in Example 10.5. What does the scale read when half the chain has landed?

Solution
\(3\times0.75\times10=\) 22.5 N.
Q10.6L4Numerical · half the mass · 1 min

A rocket in free space with exhaust speed 2500 m/s burns fuel until its mass is halved. Find its gain in speed.

Solution
\(2500\ln2=\) 1733 m/s.
Q10.7L4Numerical · cart in the rain · 2 min

An open 50 kg cart coasts at 4 m/s on a smooth track while rain falls vertically into it at 2 kg/s. Find its speed after 25 s.

Solution
Horizontal momentum conserved: \(200=(50+50)v\Rightarrow\) 2 m/s.
Q10.8L5Numerical · leaking cart · 2 min

Sand leaks through a hole in the floor of a cart at 1 kg/s while a constant 10 N force pushes the cart along a smooth track. Find the cart’s acceleration when its mass is 20 kg.

Solution
The sand leaves with the cart’s own velocity (v_rel = 0): no thrust. \(a=10/20=\) 0.5 m/s².

Chapter 11 · Techniques and common mistakes

11.1 Choosing the method

The basic idea

Problems in this unit fall into a few families, each with its own first step. Locating a CM: use symmetry, then split into simple parts (or add negative mass for holes). Displacement questions with no external force in some direction: the CM does not move in that direction. Velocity questions: conserve momentum (component by component), adding the restitution equation for collisions. Energy questions: energy is conserved only where nothing is lost; never through a sticking collision, a string jerk or an explosion. Variable mass: write the momentum balance for body plus parcel.

TechniqueUse it whenSeen in
Symmetry first, then one coordinate at a timeAny CM locationEx 1.3, 2.4
Parts as point masses at their own CMsComposite plates, wires, solidsEx 1.4, 2.6, 3.5
Negative mass for holes and cavities“Removed”, “hole”, “cavity”Ex 3.3, 3.4, 3.6
F_ext = Ma_cm; internal forces ignoredExplosions, springs, attractionEx 4.2, 4.3, 4.6
Stationary CM: m₁Δx₁ + m₂Δx₂ = 0Boats, planks, free wedgesEx 5.2, 5.3
Momentum with relative velocity“Relative to the cart”Ex 5.5, 5.6
Impulse = area under F–t; ignore finite forces during impactBats, walls, ballistic pendulums, jerksEx 6.1, 6.3, 6.6
Momentum + restitution along the line of impactAny collisionEx 7.3, 8.4
CM frame: reverse and scale by eQuick elastic checksEx 9.3
K = ½Mv_cm² + ½μv_rel²Energy lost; springs between free bodiesEx 9.4, 9.5
Momentum of body + parcelRockets, belts, chainsEx 10.2–10.5
Table 11.1 · Techniques and their signals.

11.2 Twenty common mistakes

The basic idea

Each mistake below comes with the correct statement and a one-line diagnostic question. If you get the diagnostic right without hesitation, the mistake is not yours.

M1 · The CM must lie inside the body

Correct
It can lie in empty space.
Diagnostic
Semicircular ring, R = 0.3 m: CM? 0.191 m from the centre, off the wire.

M2 · Dividing by the number of particles

Correct
Divide by the total mass.
Diagnostic
Example 1.2 y_cm? 3 m.

M3 · Ring and disc formulas swapped

Correct
Semicircular ring 2R/π; disc 4R/3π.
Diagnostic
Disc, R = 0.3 m? 0.127 m.

M4 · Solid and hollow hemispheres confused

Correct
Solid 3R/8; shell R/2.
Diagnostic
Solid, R = 0.16 m? 0.06 m.

M5 · Solid cone at h/3

Correct
Solid h/4; hollow h/3 (from the base).
Diagnostic
Solid, h = 1.2 m? 0.3 m.

M6 · Cavity: dividing by M

Correct
x = −md/(M − m).
Diagnostic
Disc with an R/2 hole at the rim? R/6.

M7 · Spherical cavity with area ratios

Correct
Volumes: (r/R)³.
Diagnostic
R/2 cavity at R/2? R/14.

M8 · Internal forces change v_cm

Correct
Only external forces do.
Diagnostic
Example 4.6 a_cm? 4 m/s².

M9 · Every fragment lands where the shell would have

Correct
Only the CM does.
Diagnostic
Example 4.3, second piece? 1440 m.

M10 · Relative and ground displacements mixed

Correct
Boat moves md/(m + M) for d relative to the boat.
Diagnostic
Example 5.2 man’s ground displacement? 3.5 m.

M11 · Vertical momentum conserved on a free wedge

Correct
Only the horizontal component.
Diagnostic
Is the vertical CM fixed in Example 5.3? No.

M12 · Kinetic energy shared equally in an explosion

Correct
K₁/K₂ = m₂/m₁.
Diagnostic
Example 5.4 lighter piece? 400 J.

M13 · Δp on a rebound as m(v − u) with both positive

Correct
Reversal: Δp = m(v + u).
Diagnostic
0.2 kg, 10 → 8 m/s back? 3.6 N s.

M14 · Energy conserved through the impact of a ballistic pendulum

Correct
Momentum at the impact, energy in the swing.
Diagnostic
Example 6.3 bullet speed? 402 m/s.

M15 · Kinetic energy conserved when a string jerks

Correct
It behaves like a sticking collision.
Diagnostic
Example 6.5 loss? 15 J.

M16 · Restitution applied to the speeds of one body

Correct
Separation velocity = e × approach velocity.
Diagnostic
Example 7.3 v₂ − v₁? 3 m/s.

M17 · Rebound height e·h

Correct
e²h.
Diagnostic
h = 10 m, e = 0.5? 2.5 m.

M18 · e applied to the whole velocity in an oblique impact

Correct
Only to the normal component.
Diagnostic
Example 8.3 speed after? 18.0 m/s.

M19 · A sticking collision loses all the kinetic energy

Correct
It loses ½μv_rel²; ½Mv_cm² survives.
Diagnostic
Example 9.4 loss? 450 J of 500 J.

M20 · Rocket thrust taken as Mv or ignored

Correct
Thrust = u|dM/dt|, u relative to the rocket.
Diagnostic
u = 2 km/s, 10 kg/s? 20 kN.

Exercise 11

Q11.1L4Assertion–reason · CM off the body · 1 min

Assertion: The CM of a uniform semicircular ring does not lie on the ring. Reason: The CM is a mass-weighted average position, which need not coincide with any point of the body.

(A) Both true, R explains A(B) Both true, R does not explain A(C) A true, R false(D) A false, R true
Solution
(A).
Q11.2L4Multiple correct · isolated system · 2 min

For a system on which no external force acts, which are always true?

(A) Total momentum is constant(B) Total kinetic energy is constant(C) The velocity of the CM is constant(D) The CM may accelerate if the parts collide
Solution
(A), (C).
Q11.3L5Numerical · find the error · 2 min

A student claims that when a shell of range 300 m bursts into two equal pieces at the top, both pieces land 300 m from the gun. One piece in fact drops vertically. Correct the student’s answer for the other piece.

Solution
Only the CM lands at 300 m: \(\tfrac12(150)+\tfrac12x=300\Rightarrow\) 450 m.
Q11.4L5Numerical · find the error · 2 min

A student finds the speed after a 2 kg block at 6 m/s sticks to a 1 kg block at rest from \(\tfrac12(2)(36)=\tfrac12(3)v^2\), getting 4.90 m/s. Correct it.

Solution
Kinetic energy is not conserved when bodies stick; momentum is: \(12=3v\Rightarrow\) v = 4 m/s.

Chapter 12 · Extended practice

Twenty-eight further questions across all chapters, with full solutions. Take g = 10 m/s², sin 37° = 0.6.

Practice set

Q12.1L1Numerical · two masses · 1 min

A 3 kg mass is at x = 2 m and a 1 kg mass at x = 6 m. Find \(x_{\text{cm}}\).

Solution
\((6+6)/4=\) 3 m.
Q12.2L1Numerical · uniform rod · 1 min

Where is the CM of a uniform rod 4 m long?

Solution
At its midpoint, 2 m from either end.
Q12.3L1Numerical · momentum · 1 min

Find the momentum of a 2 kg body moving at 3 m/s.

Solution
6 kg m/s.
Q12.4L1Numerical · stopping impulse · 1 min

Find the impulse needed to stop a 1 kg body moving at 10 m/s.

Solution
10 N s, opposite to its motion.
Q12.5L2Numerical · three masses · 1 min

Masses of 1, 1 and 2 kg are at (0, 0), (2, 0) and (1, 2) m. Find the CM.

Solution
(1 m, 1 m).
Q12.6L2Numerical · recoil · 1 min

A 3 kg gun fires a 50 g bullet at 300 m/s. Find the recoil speed.

Solution
5 m/s.
Q12.7L2Numerical · restitution · 1 min

A ball hits a floor at 8 m/s and rebounds at 4 m/s. Find e.

Solution
0.5.
Q12.8L3Numerical · solid hemisphere · 1 min

Find the CM of a solid hemisphere of radius 0.4 m.

Solution
\(3(0.4)/8=\) 0.15 m above the flat face.
Q12.9L3Numerical · sticking · 2 min

A 4 kg body at 5 m/s collides and sticks with a 6 kg body at rest. Find the common speed and the energy lost.

Solution
2 m/s; \(50-20=\) 30 J.
Q12.10L3Numerical · boat · 1 min

An 80 kg man walks 5 m along a 320 kg boat at rest on still water. How far does the boat move?

Solution
\(80\times5/400=\) 1 m.
Q12.11L3Numerical · impulse on a moving ball · 1 min

A 0.5 kg ball moving at 2 m/s receives a 20 N push along its motion for 0.1 s. Find its new speed.

Solution
\(2+2/0.5=\) 6 m/s.
Q12.12L3Numerical · elastic · 2 min

A 2 kg ball at 3 m/s collides elastically head-on with a 4 kg ball at rest. Find both velocities.

Solution
\(\tfrac{2-4}{6}(3)=\) −1 m/s; \(\tfrac{4}{6}(3)=\) 2 m/s.
Q12.13L3Numerical · hole at the rim · 2 min

A hole of radius 0.3 m, touching the edge, is cut from a uniform disc of radius 0.9 m. Find the shift of the CM.

Solution
m/M = 1/9, d = 0.6 m: \(\dfrac{(1/9)(0.6)}{8/9}=\) 0.075 m, away from the hole.
Q12.14L4Numerical · λ ∝ x³ · 1 min

A rod of length 1.5 m has λ ∝ x³. Find its CM.

Solution
\(\tfrac45L=\) 1.2 m.
Q12.15L4Numerical · bent wire · 2 min

A uniform wire is bent into an L: one arm 2 m along the x axis from the origin, the other 1 m along the y axis from the origin. Find the CM.

Solution
\(x=\tfrac{2(1)}{3}=\) 0.667 m, \(y=\tfrac{1(0.5)}{3}=\) 0.167 m.
Q12.16L4Numerical · unequal fragments · 2 min

A 3 kg shell with range 120 m bursts at the top into a 1 kg piece that falls vertically and a 2 kg piece. Where does the 2 kg piece land?

Solution
\(1(60)+2x=3(120)\Rightarrow\) 150 m.
Q12.17L4Numerical · wedge · 1 min

A 2 kg block slides down a smooth 6 kg wedge (smooth floor) whose slope has a horizontal length of 1.6 m. How far does the wedge move?

Solution
\(2(1.6)/8=\) 0.4 m.
Q12.18L4Numerical · time to rest · 2 min

A ball is dropped from 1.6 m onto a floor with e = 0.5. How long does it take to come to rest?

Solution
\(t_0=\sqrt{0.32}=0.566\) s: \(0.566\times3=\) 1.70 s.
Q12.19L4Numerical · glancing hit · 2 min

A ball at 8 m/s hits an identical ball at rest elastically and is deflected through 37°. Find both speeds.

Solution
\(8\cos37^\circ=\) 6.4 m/s; \(8\sin37^\circ=\) 4.8 m/s.
Q12.20L4Numerical · string jerk · 2 min

A 3 kg block at 4 m/s is joined by a slack string to a 1 kg block at rest on a smooth floor. Find the common speed after the jerk and the energy lost.

Solution
3 m/s; \(\tfrac12(0.75)(16)=\) 6 J.
Q12.21L4Numerical · rocket · 1 min

A rocket in free space with exhaust speed 3 km/s burns fuel until its mass is a quarter of the initial mass. Find the speed gained.

Solution
\(3000\ln4=\) 4159 m/s.
Q12.22L4Numerical · spring between blocks · 2 min

Blocks of 2 kg and 6 kg are joined by a spring (k = 600 N/m). The 2 kg block is given 4 m/s toward the other. Find the maximum compression.

Solution
μ = 1.5 kg: \(4\sqrt{1.5/600}=\) 0.2 m.
Q12.23L5Numerical · cylinder with a cavity · 3 min

A uniform solid cylinder (radius 0.3 m, height 0.6 m) has a hemispherical cavity of radius 0.3 m scooped from its top face. Find the height of its CM above the base.

Solution
Volumes (÷π): 0.054 at 0.3 m; cavity −0.018 at \(0.6-\tfrac38(0.3)=0.4875\) m: \(y=\dfrac{0.0162-0.008775}{0.036}=\) 0.206 m.
Q12.24L5Numerical · chain of collisions · 3 min

Ball A (m) at 8 m/s hits B (2m) at rest; then B hits C (4m) at rest. Both collisions are head-on with e = 1/2. Find C’s speed.

Solution
\(v_B=\dfrac{(1.5)m(8)}{3m}=4\) m/s; \(v_C=\dfrac{1.5(2m)(4)}{6m}=\) 2 m/s.
Q12.25L5Numerical · bullet passing through · 3 min

A 20 g bullet at 400 m/s passes through a 2 kg block resting on a smooth floor and emerges at 100 m/s. Find the block’s speed and the energy lost.

Solution
\(0.02(300)=2V\Rightarrow\) V = 3 m/s; lost \(1600-100-9=\) 1491 J.
Q12.26L5Numerical · chain on a scale · 1 min

A 3 kg chain, 2 m long, falls onto a scale pan as in Example 10.5. What does the scale read just as the last link lands?

Solution
3Mg = 90 N.
Q12.27L5Numerical · collision then a vertical circle · 4 min

A 1 kg ball moving at 4 m/s hits elastically a 1 kg bob hanging at rest on a 0.5 m string. Does the bob complete the circle? If not, at what height above its lowest point does the string go slack?

Solution
Bob gets 4 m/s; 5gL = 25 > 16 > 2gL = 10: it does not complete the circle; \(\cos\theta=\dfrac{10-16}{15}=-0.4\): slack at 0.7 m above the lowest point.
Q12.28L5Numerical · oblique bounce with impulse · 3 min

A 0.2 kg ball strikes a smooth floor at 10 m/s, moving at 30° below the horizontal; e = 0.6. Find its speed and angle after the bounce and the impulse from the floor.

Solution
Normal 5 → 3 m/s, along 8.66 m/s: 9.17 m/s at 19.1° above the floor; \(J=0.2(5+3)=\) 1.6 N s.

Formula derivations

Centre of mass of particles

Formula
\(\vec r_{\text{cm}}=\dfrac{\sum m_i\vec r_i}{\sum m_i}\); two particles: \(m_1r_1=m_2r_2\); shift \(\Delta\vec r_{\text{cm}}=\sum m_i\Delta\vec r_i/M\)
Starting point
Mass-weighted average position.
Assumptions
Point masses or parts at their own CMs.
Derivation
Derivations 1.1–1.4.
Meaning of each term
The point that moves as if all the mass were there.
Dimensions
L.
Sign convention
Coordinates with signs.
Valid range
Any system.
Correct use
2 kg at 0, 3 kg at 5 m: 3 m.
Inappropriate use
Dividing by the number of particles.

Continuous bodies

Formula
\(x_{\text{cm}}=\int x\,dm/\int dm\); rod λ ∝ xⁿ: \(\tfrac{n+1}{n+2}L\); arc \(R\sin\alpha/\alpha\) (ring 2R/π); sector \(2R\sin\alpha/3\alpha\) (disc 4R/3π); triangle h/3
Starting point
Sum over elements dm.
Assumptions
Uniform unless λ given.
Derivation
Derivations 2.1–2.5.
Meaning of each term
CM of standard shapes.
Dimensions
L.
Sign convention
Measured from the centre or the base.
Valid range
—
Correct use
Semicircular disc R = 0.3 m: 0.127 m.
Inappropriate use
Ring and disc formulas swapped.

Solids and cavities

Formula
Solid cone h/4, hollow cone h/3; solid hemisphere 3R/8, shell R/2 (above the base); cavity \(x=-\dfrac{md}{M-m}\)
Starting point
Discs or bands integrated; negative mass for holes.
Assumptions
Uniform density.
Derivation
Derivations 3.1–3.4.
Meaning of each term
CM heights; shift away from a cavity.
Dimensions
L.
Sign convention
Away from the hole.
Valid range
—
Correct use
Disc with an R/2 hole at the rim: R/6.
Inappropriate use
Dividing by M instead of M − m.

Motion of the CM

Formula
\(\vec P=M\vec v_{\text{cm}}\); \(\vec F_{\text{ext}}=M\vec a_{\text{cm}}\); burst: \(m_1x_1+m_2x_2=MR\)
Starting point
Differentiating the CM; internal forces cancel in pairs.
Assumptions
Constant total mass.
Derivation
Derivations 4.1–4.4.
Meaning of each term
The CM moves like one particle under the external forces.
Dimensions
—
Sign convention
Vectors.
Valid range
Fragments landing together for the burst formula.
Correct use
Equal halves, one dropping from the top: 3R/2.
Inappropriate use
Internal forces included.

Momentum conservation

Formula
\(F_{\text{ext},x}=0\Rightarrow\sum m_iv_{ix}\) constant; boat \(X=-\dfrac{md}{m+M}\); wedge \(-\dfrac{mL}{m+M}\); explosion \(K_1/K_2=m_2/m_1\)
Starting point
F_ext = dP/dt.
Assumptions
No external force along the direction used.
Derivation
Derivations 5.1–5.4.
Meaning of each term
Velocities and displacements without forces.
Dimensions
—
Sign convention
Relative velocities written explicitly.
Valid range
—
Correct use
60 kg man, 140 kg boat, 5 m: 1.5 m.
Inappropriate use
Ground and relative displacements mixed.

Impulse

Formula
\(\vec J=\int\vec F\,dt=\Delta\vec p\); rebound \(J=2mu\cos\theta\); ballistic \(v=\tfrac{m+M}{m}\sqrt{2gh}\); jerk \(v=\tfrac{m_1u}{m_1+m_2}\)
Starting point
Integrating the second law over the contact.
Assumptions
Impulsive forces dominate during the contact.
Derivation
Derivations 6.1–6.4.
Meaning of each term
Change of momentum; average force J/Δt.
Dimensions
MLT⁻¹.
Sign convention
Vector.
Valid range
Short contact.
Correct use
Triangle 600 N × 0.02 s: 6 N s.
Inappropriate use
Energy conserved through an impact.

1-D collisions

Formula
\(v_2-v_1=e(u_1-u_2)\); \(v_1=\tfrac{(m_1-em_2)u_1+(1+e)m_2u_2}{m_1+m_2}\); \(\Delta K=\tfrac12\mu(1-e^2)u_{\text{rel}}^2\); bounce \(h_n=e^{2n}h\)
Starting point
Momentum plus Newton’s law of restitution.
Assumptions
Head-on, impulsive.
Derivation
Derivations 7.1–7.4.
Meaning of each term
Velocities after impact; energy lost.
Dimensions
—
Sign convention
Velocities with signs.
Valid range
0 ≤ e ≤ 1.
Correct use
2 kg at 6 on 1 kg, e = 0.5: 3 and 6 m/s.
Inappropriate use
Rebound height eh.

2-D collisions

Formula
Sticking \(\vec V=\tfrac{m_1\vec u_1+m_2\vec u_2}{m_1+m_2}\); equal masses elastic: 90°; spheres: 1-D along the line of centres; wall: \(\tan\theta’=\tan\theta/e\)
Starting point
Vector momentum; contact force along the normal.
Assumptions
Smooth surfaces.
Derivation
Derivations 8.1–8.4.
Meaning of each term
Directions and speeds after oblique impacts.
Dimensions
—
Sign convention
Resolve along and across the line of impact.
Valid range
—
Correct use
10 m/s deflected 30°: 8.66 and 5 m/s.
Inappropriate use
e applied to the whole velocity.

CM frame

Formula
\(K=\tfrac12Mv_{\text{cm}}^2+\tfrac12\mu v_{\text{rel}}^2\), \(\mu=\tfrac{m_1m_2}{m_1+m_2}\); \(v_i=(1+e)v_{\text{cm}}-eu_i\); spring \(\omega=\sqrt{k/\mu}\), \(x_{\max}=v_0\sqrt{\mu/k}\)
Starting point
Velocities split into CM and relative parts.
Assumptions
Two bodies (for μ).
Derivation
Derivations 9.1–9.4.
Meaning of each term
Energy available for loss; coupled oscillations.
Dimensions
—
Sign convention
—
Valid range
—
Correct use
0.1 kg at 100 m/s into 0.9 kg: 450 J lost.
Inappropriate use
Using m₁ or m₁ + m₂ in place of μ.

Variable mass

Formula
\(M\tfrac{dv}{dt}=F_{\text{ext}}+v_{\text{rel}}\tfrac{dM}{dt}\); rocket \(v=u\ln\tfrac{M_0}{M}-gt\); belt \(F=v\dot m\), \(P=v^2\dot m\); chain on scale \(N=3\lambda gx\)
Starting point
Momentum of body + parcel.
Assumptions
Parcel velocity known relative to the body.
Derivation
Derivations 10.1–10.5.
Meaning of each term
Thrust; speed gain; forces from mass flow.
Dimensions
—
Sign convention
dM negative for mass loss.
Valid range
—
Correct use
Mass ratio 5, u = 2 km/s: 3.22 km/s.
Inappropriate use
Thrust with a leaking cart (v_rel = 0).

Formula reference table

QuantityFormulaConditionsSI unitCommon mistake
CM of particles\(\sum m_ix_i/\sum m_i\)—m÷ number of particles
Rod, λ ∝ xⁿ\(\tfrac{n+1}{n+2}L\)From the light endmL/2
Semicircular ring\(2R/\pi\)From the centrem4R/3π
Semicircular disc\(4R/3\pi\)From the centrem2R/π
Arc of angle 2α\(R\sin\alpha/\alpha\)From the centremUsing 2α for α
Triangle\(h/3\)From the basemh/2
Solid cone\(h/4\)From the basemh/3
Solid hemisphere\(3R/8\)From the flat facemR/2
Hemispherical shell\(R/2\)From the rim planem3R/8
Cavity\(-md/(M-m)\)Negative massm÷ M
Total momentum\(Mv_{\text{cm}}\)—kg m/sAverage of speeds
Boat displacement\(md/(m+M)\)No horizontal forcemmd/M
Impulse\(\int F\,dt=\Delta p\)—N sPeak × duration
Restitution\(e=\tfrac{v_2-v_1}{u_1-u_2}\)Along the line of impact—Speeds of one body
Elastic, target at rest\(\tfrac{m_1-m_2}{m_1+m_2}u,\ \tfrac{2m_1}{m_1+m_2}u\)Head-onm/sExchange for unequal masses
Energy lost\(\tfrac12\mu(1-e^2)u_{\text{rel}}^2\)Any 1-D collisionJAll K lost
Bounce heights\(e^{2n}h\)Fixed floormeh
Oblique bounce\(\tan\theta’=\tan\theta/e\)Smooth surface—e on both components
Rocket\(u\ln(M_0/M)\)Free spacem/sLinear in mass ratio
Thrust\(u|dM/dt|\)u relative to the bodyNRocket’s own speed
Formula reference table.

Comparison tables

BodyWire / shell (mass on the boundary)Plate / solid (mass filling it)
SemicircleRing: 2R/π = 0.637RDisc: 4R/3π = 0.424R
HemisphereShell: R/2Solid: 3R/8
Cone (from the base)Hollow: h/3Solid: h/4
Triangle (from a side)Three equal rods: at the incentre of the midpoint trianglePlate: h/3 (centroid)
Table T1 · Boundary mass versus filled bodies.
TypeeMomentumKinetic energy
Elastic1ConservedConserved
Inelastic0 < e < 1ConservedLost: ½μ(1 − e²)u_rel²
Perfectly inelastic0ConservedLost: ½μu_rel² (largest possible)
Explosion—ConservedGained (from chemical energy)
Table T2 · Kinds of collision.

Question bank by level

Every exercise and test question, grouped by level with links.

LevelQuestions
L1 Foundation22
L2 Basic application26
L3 JEE Main29
L4 Advanced29
L5 Advanced challenge24
Questions per level (130 in total).
L1 Foundation · 22 questions
  1. Q1.1 Single correct · two equal masses · 1 min
  2. Q1.2 Numerical · two masses · 1 min
  3. Q2.1 Numerical · uniform rod · 1 min
  4. Q2.2 Single correct · semicircular ring · 1 min
  5. Q3.1 Numerical · solid cone · 1 min
  6. Q4.1 Single correct · internal forces · 1 min
  7. Q4.2 Numerical · v_cm · 1 min
  8. Q5.1 Numerical · recoil · 1 min
  9. Q6.1 Numerical · impulse · 1 min
  10. Q6.2 Single correct · units · 1 min
  11. Q7.1 Single correct · equal masses · 1 min
  12. Q7.2 Numerical · perfectly inelastic e · 1 min
  13. Q8.1 Single correct · equal masses · 1 min
  14. Q9.1 Single correct · CM frame · 1 min
  15. Q10.1 Numerical · thrust · 1 min
  16. Q12.1 Numerical · two masses · 1 min
  17. Q12.2 Numerical · uniform rod · 1 min
  18. Q12.3 Numerical · momentum · 1 min
  19. Q12.4 Numerical · stopping impulse · 1 min
  20. QM.1 Numerical · two masses · +4/0
  21. QM.2 Single correct · conservation · +4/−1
  22. QM.3 Numerical · impulse · +4/0
L2 Basic application · 26 questions
  1. Q1.3 Numerical · three masses · 1 min
  2. Q1.4 Numerical · Earth–Moon · 1 min
  3. Q2.3 Numerical · λ = kx · 1 min
  4. Q2.4 Numerical · triangle · 1 min
  5. Q3.2 Numerical · shell · 1 min
  6. Q3.3 Numerical · hollow cone · 1 min
  7. Q4.3 Numerical · momentum · 1 min
  8. Q4.4 Numerical · a_cm · 1 min
  9. Q5.2 Numerical · boat · 1 min
  10. Q5.3 Numerical · explosion · 1 min
  11. Q6.3 Numerical · catching · 1 min
  12. Q6.4 Numerical · rectangular pulse · 1 min
  13. Q7.3 Numerical · sticking · 1 min
  14. Q7.4 Numerical · e from heights · 1 min
  15. Q8.2 Numerical · sticking at right angles · 1 min
  16. Q8.3 Numerical · wall impulse · 1 min
  17. Q9.2 Numerical · reduced mass · 1 min
  18. Q9.3 Numerical · internal energy · 1 min
  19. Q10.2 Numerical · belt · 1 min
  20. Q10.3 Numerical · mass ratio · 1 min
  21. Q12.5 Numerical · three masses · 1 min
  22. Q12.6 Numerical · recoil · 1 min
  23. Q12.7 Numerical · restitution · 1 min
  24. QM.4 Numerical · ring · +4/0
  25. QM.5 Numerical · sticking · +4/0
  26. QM.6 Multiple correct · elastic collisions · +4/+1/−2
L3 JEE Main · 29 questions
  1. Q1.5 Numerical · three rods · 2 min
  2. Q1.6 Numerical · triangle · 2 min
  3. Q2.5 Numerical · semicircular disc · 1 min
  4. Q2.6 Numerical · 60° arc · 2 min
  5. Q3.4 Numerical · disc with hole · 2 min
  6. Q3.5 Numerical · sphere with cavity · 2 min
  7. Q4.5 Numerical · burst at the top · 2 min
  8. Q4.6 Numerical · Atwood CM · 2 min
  9. Q5.4 Numerical · wedge · 1 min
  10. Q5.5 Numerical · dog on a boat · 2 min
  11. Q6.5 Numerical · head-on rebound · 1 min
  12. Q6.6 Numerical · variable force · 2 min
  13. Q7.5 Numerical · e = 0.5 · 2 min
  14. Q7.6 Numerical · energy lost · 1 min
  15. Q8.4 Numerical · floor bounce · 2 min
  16. Q8.5 Numerical · three-piece explosion · 1 min
  17. Q9.4 Numerical · maximum loss · 1 min
  18. Q9.5 Numerical · head-on equal masses · 1 min
  19. Q10.4 Numerical · lift-off · 1 min
  20. Q10.5 Numerical · chain on a scale · 2 min
  21. Q12.8 Numerical · solid hemisphere · 1 min
  22. Q12.9 Numerical · sticking · 2 min
  23. Q12.10 Numerical · boat · 1 min
  24. Q12.11 Numerical · impulse on a moving ball · 1 min
  25. Q12.12 Numerical · elastic · 2 min
  26. Q12.13 Numerical · hole at the rim · 2 min
  27. QM.7 Numerical · boat · +4/0
  28. QM.8 Numerical · rebound · +4/0
  29. QM.9 Numerical · cone · +4/0
L4 Advanced · 29 questions
  1. Q1.7 Numerical · moving one mass · 2 min
  2. Q2.7 Numerical · linear density · 2 min
  3. Q3.6 Numerical · cylinder and hemisphere · 2 min
  4. Q3.7 Numerical · off-centre hole · 2 min
  5. Q4.7 Numerical · meeting point · 2 min
  6. Q5.6 Numerical · relative walking speed · 2 min
  7. Q5.7 Numerical · quarter-circle track · 2 min
  8. Q6.7 Numerical · ballistic pendulum · 2 min
  9. Q7.7 Numerical · total distance · 2 min
  10. Q8.6 Numerical · deflection by 60° · 2 min
  11. Q8.7 Numerical · line of centres · 2 min
  12. Q9.6 Numerical · spring compression · 2 min
  13. Q9.7 Numerical · period · 1 min
  14. Q10.6 Numerical · half the mass · 1 min
  15. Q10.7 Numerical · cart in the rain · 2 min
  16. Q11.1 Assertion–reason · CM off the body · 1 min
  17. Q11.2 Multiple correct · isolated system · 2 min
  18. Q12.14 Numerical · λ ∝ x³ · 1 min
  19. Q12.15 Numerical · bent wire · 2 min
  20. Q12.16 Numerical · unequal fragments · 2 min
  21. Q12.17 Numerical · wedge · 1 min
  22. Q12.18 Numerical · time to rest · 2 min
  23. Q12.19 Numerical · glancing hit · 2 min
  24. Q12.20 Numerical · string jerk · 2 min
  25. Q12.21 Numerical · rocket · 1 min
  26. Q12.22 Numerical · spring between blocks · 2 min
  27. QM.10 Numerical · ballistic pendulum · +4/0
  28. QM.11 Numerical · disc with a hole · +4/0
  29. QM.12 Numerical · rocket · +4/0
L5 Advanced challenge · 24 questions
  1. Q1.8 Numerical · one mass missing · 2 min
  2. Q2.8 Numerical · sector · 2 min
  3. Q3.8 Numerical · frustum · 3 min
  4. Q4.8 Numerical · three fragments · 4 min
  5. Q5.8 Numerical · jumping one at a time · 3 min
  6. Q6.8 Numerical · jerk over a pulley · 3 min
  7. Q7.8 Numerical · energy transfer · 2 min
  8. Q8.8 Numerical · wall at 15 m · 3 min
  9. Q9.8 Numerical · velocities at natural length · 2 min
  10. Q10.8 Numerical · leaking cart · 2 min
  11. Q11.3 Numerical · find the error · 2 min
  12. Q11.4 Numerical · find the error · 2 min
  13. Q12.23 Numerical · cylinder with a cavity · 3 min
  14. Q12.24 Numerical · chain of collisions · 3 min
  15. Q12.25 Numerical · bullet passing through · 3 min
  16. Q12.26 Numerical · chain on a scale · 1 min
  17. Q12.27 Numerical · collision then a vertical circle · 4 min
  18. Q12.28 Numerical · oblique bounce with impulse · 3 min
  19. QC.1 Composite solid · 10 marks
  20. QC.2 Unequal burst · 10 marks
  21. QC.3 Block on a free curved block · 10 marks
  22. QC.4 Spring-joined pair · 10 marks
  23. QC.5 Chain on a scale · 10 marks
  24. QC.6 Rocket against gravity · 10 marks

Revision guide and examination preparation

One-page conceptual summary

Locating the CM. \(\vec r_{\text{cm}}=\sum m_i\vec r_i/M\), or \(\int\vec r\,dm/M\). Use symmetry, split into parts, and treat holes as negative mass. Standard results: ring 2R/π, disc 4R/3π, triangle h/3, solid cone h/4, solid hemisphere 3R/8, shell R/2.

Motion of the CM. \(\vec P=M\vec v_{\text{cm}}\) and \(\vec F_{\text{ext}}=M\vec a_{\text{cm}}\); internal forces — explosions, springs, collisions — never change the CM’s motion.

Conservation. With no external force along a direction, momentum along it is conserved and the CM coordinate stays fixed if it started at rest (boats, wedges). Write relative velocities explicitly.

Impulse. \(\vec J=\int\vec F\,dt=\Delta\vec p\). During short impacts finite forces are negligible: conserve momentum through the impact, energy before and after.

Collisions. Momentum plus restitution \(v_2-v_1=e(u_1-u_2)\) along the line of impact; components across it unchanged. Loss \(\tfrac12\mu(1-e^2)u_{\text{rel}}^2\). Equal masses, elastic: exchange (1-D) or 90° (2-D).

CM frame. \(K=\tfrac12Mv_{\text{cm}}^2+\tfrac12\mu v_{\text{rel}}^2\); spring-joined bodies oscillate with ω = √(k/μ).

Variable mass. \(M\dot v=F_{\text{ext}}+v_{\text{rel}}\dot M\); rocket \(u\ln(M_0/M)\); belt \(F=v\dot m\); falling chain 3 × weight on the pan.

Formula sheet

The complete formula sheet is the formula reference table; derivations are on the formula cards.

Choosing the method

If the problem has…Do this first
A shape whose CM is askedSymmetry; split into parts; negative mass for holes
“How far does the boat / wedge move?”Stationary CM along the force-free direction
Speeds after an explosion or jumpMomentum, with relative velocities written out
A collisionMomentum + restitution along the line of impact
A short impact followed by motionMomentum during the impact, energy afterwards
“Energy lost”, “maximum compression”½μv_rel² (CM energy cannot be lost)
Mass entering or leavingMomentum of body + parcel
Table R1 · Method selection.

The 30 most important facts

  1. r_cm = Σmr/M; m₁r₁ = m₂r₂ for two masses.
  2. The CM can lie outside the material.
  3. Parts act as point masses at their own CMs.
  4. Rod with λ ∝ xⁿ: (n + 1)L/(n + 2).
  5. Arc of angle 2α: R sin α/α; semicircular ring 2R/π.
  6. Sector: 2R sin α/3α; semicircular disc 4R/3π.
  7. Triangle: h/3; average of the vertices.
  8. Solid cone h/4; hollow cone h/3.
  9. Solid hemisphere 3R/8; shell R/2.
  10. Cavity: x = −md/(M − m).
  11. P = Mv_cm.
  12. F_ext = Ma_cm; internal forces cancel.
  13. After a burst the CM continues on the parabola.
  14. No external force along x ⇒ P_x constant.
  15. Boat moves md/(m + M).
  16. Free wedge moves mL/(m + M).
  17. Explosion from rest: K₁/K₂ = m₂/m₁.
  18. J = ∫F dt = Δp.
  19. Elastic wall rebound: J = 2mu cos θ.
  20. Ballistic pendulum: momentum, then energy.
  21. String jerk = sticking collision along the string.
  22. v₂ − v₁ = e(u₁ − u₂).
  23. Equal masses, elastic, head-on: exchange.
  24. Energy lost: ½μ(1 − e²)u_rel².
  25. Bounce heights e²ⁿh; total time t₀(1 + e)/(1 − e).
  26. Equal masses, elastic, oblique: 90°.
  27. Oblique impact: e on the normal component only.
  28. K = ½Mv_cm² + ½μv_rel².
  29. Spring between free bodies: ω = √(k/μ).
  30. Rocket: Δv = u ln(M₀/M); thrust u|dM/dt|.

Common JEE traps

  • Dividing by the number of particles; mixing ring and disc formulas.
  • Cavities: dividing by M; area ratios for spheres.
  • Assuming every fragment lands at the original range.
  • Relative and ground displacements confused on boats.
  • Energy conserved through sticking, jerks or embedding bullets.
  • e applied to whole velocities, or rebound height eh.
  • Assuming all kinetic energy can be lost.
  • Thrust where the mass leaves with the body’s own velocity.

Mixed-level practice test

Time: 45 minutes. Marking: single correct +4/−1; multiple correct +4 if exactly right, +1 per correct option if no wrong option is chosen, −2 if any wrong option is chosen; numerical +4/0. Maximum 48. g = 10 m/s².

QM.1L1Numerical · two masses · +4/0

2 kg masses are at x = 0 and x = 4 m. \(x_{\text{cm}}\) (m) is

Solution
2.
QM.2L1Single correct · conservation · +4/−1

The total momentum of a system is conserved when

(A) no internal forces act(B) the net external force is zero(C) the kinetic energy is constant(D) the bodies collide elastically
Solution
(B).
QM.3L1Numerical · impulse · +4/0

The impulse (N s) needed to stop a 0.2 kg ball moving at 5 m/s is

Solution
1.
QM.4L2Numerical · ring · +4/0

The CM of a semicircular ring of radius 1.57 m is at a distance (m, 1 decimal) from the centre of

Solution
\(2(1.57)/\pi=\) 1.0.
QM.5L2Numerical · sticking · +4/0

A 1 kg body at 6 m/s sticks to a 2 kg body at rest. The common speed (m/s) is

Solution
2.
QM.6L2Multiple correct · elastic collisions · +4/+1/−2

In an elastic collision

(A) momentum is conserved(B) kinetic energy is conserved(C) e = 1(D) the bodies move together afterwards
Solution
(A), (B), (C).
QM.7L3Numerical · boat · +4/0

A 70 kg man walks 10 m along a 280 kg boat on still water. The boat moves (m)

Solution
2.
QM.8L3Numerical · rebound · +4/0

A ball dropped from 5 m on a floor with e = 0.8 rebounds to a height (m) of

Solution
3.2.
QM.9L3Numerical · cone · +4/0

The CM of a solid cone of height 0.8 m is above its base by (m)

Solution
0.2.
QM.10L4Numerical · ballistic pendulum · +4/0

A 10 g bullet embeds in a 0.99 kg hanging block, which rises 0.45 m. The bullet’s speed (m/s) was

Solution
V = 3 m/s: 300.
QM.11L4Numerical · disc with a hole · +4/0

A hole of radius R/2 touching the rim is cut from a disc of radius 1.2 m. The CM shifts by (m)

Solution
\(R/6=\) 0.2.
QM.12L4Numerical · rocket · +4/0

A rocket in free space with exhaust speed 1000 m/s reduces its mass to one-third. The speed gained (m/s, nearest whole number) is

Solution
\(1000\ln3=\) 1099.

Level 5 challenge test

Time: 60 minutes. Six questions, 10 marks each (method 6, answer 4). Pass mark 40/60.

QC.1L5Composite solid · 10 marks

A solid cone stands on a solid hemisphere of the same material and the same radius, 0.2 m. Find the height of the cone for which the CM lies at the joint.

Solution
\(h=\sqrt3R=\) 0.346 m.
QC.2L5Unequal burst · 10 marks

A 4 kg shell whose range would be 400 m bursts at the top into a 1 kg piece that falls vertically and a 3 kg piece. Where does the 3 kg piece land?

Solution
\(1(200)+3x=4(400)\Rightarrow\) 467 m.
QC.3L5Block on a free curved block · 10 marks

A 1 kg block slides from rest down a smooth curved groove in a 4 kg block that stands on a smooth floor, dropping 0.8 m and leaving horizontally. Find the speeds of both blocks.

Solution
v = 4V; \(8=\tfrac12v^2+2V^2=10V^2\): V = 0.894 m/s, v = 3.58 m/s.
QC.4L5Spring-joined pair · 10 marks

A 2 kg block C at 6 m/s hits block A (2 kg) elastically; A is joined to B (2 kg) by a spring of constant 400 N/m, all on a smooth floor. Find the maximum compression.

Solution
A gets 6 m/s; μ = 1 kg; K′ = 18 J: \(x=\sqrt{36/400}=\) 0.3 m.
QC.5L5Chain on a scale · 10 marks

A 2 kg chain, 1 m long, falls onto a scale pan from the vertical as in Example 10.5. Find the reading when 0.25 m has landed.

Solution
\(3(0.5)(10)=\) 15 N.
QC.6L5Rocket against gravity · 10 marks

A 2000 kg rocket burns 1500 kg of fuel at 50 kg/s with exhaust speed 2500 m/s, rising vertically. Find its initial acceleration and burn-out speed.

Solution
\(a_0=\dfrac{125\,000-20\,000}{2000}=\) 52.5 m/s²; \(t_b=30\) s: \(v_b=2500\ln4-300=\) 3166 m/s.

Self-assessment checklist

Tick what you can do without looking. Ticks are saved in this browser only.

Chapter mastery roadmap

StageStudyPractiseMove on when
1 Locating the CMCh 1–3Exercises 1–3You use symmetry and negative mass without prompting
2 CM motion and momentumCh 4–5Exercises 4–5You never let internal forces move the CM
3 ImpactsCh 6–8Exercises 6–8You apply e only along the line of impact
4 Energy and variable massCh 9–10Exercises 9–10You split K into CM and internal parts
5 MasteryCh 11–12, formula cardsL5 bank, both tests36/48 and 40/60