ESE (Engineering Services Examination): Exam Information

Everything an engineering graduate needs for the UPSC Engineering Services Examination (ESE / IES) 2027 — eligibility, the three-stage pattern, branch-wise cut-offs, vacancies, services and salary, exam-day rules and preparation.

  • UPSC — Conducting body
  • upsc.gov.in — Official portal
  • 3 stages — Prelims, Main, Interview
  • 1,300 marks — Final merit
  • ≈480 — ESE 2027 vacancies

Disclaimer: Vacancies, cut-offs, services, fees and dates change every year. Figures on this page are compiled from UPSC notices and results and other public sources and are indicative only. Always verify on upsc.gov.in and in the current notice before taking any decision. Page compiled October 2026.

Introduction & official website

The Engineering Services Examination (ESE), often called IES, is conducted by the Union Public Service Commission (UPSC) to recruit engineers to Group A and Group B technical services of the Government of India — in the Railways, Central Public Works Department, Central Water Commission, Military Engineer Services, Central Electricity Authority, Telecom and other departments.

ESE at a glance
Official websiteupsc.gov.in; online application at upsconline.gov.in
Conducting bodyUnion Public Service Commission (UPSC)
FrequencyOnce a year
DisciplinesCivil, Mechanical, Electrical, and Electronics & Telecommunication Engineering
StagesPreliminary (objective) → Main (conventional) → Personality Test
ESE 2027Notice No. 02/2027-ENGG, issued 16 September 2026; about 480 vacancies; Preliminary on 31 January 2027

Purpose of the exam

ESE is the main entry route for engineering graduates into Group A central government engineering services, which lead to senior technical and administrative positions such as Executive Engineer, Chief Engineer and Engineer-in-Chief.

↑ Back to top

Eligibility criteria

CriterionRequirement (ESE 2027)
NationalityCitizen of India, or as specified in the notice (subjects of Nepal / Bhutan and certain other categories)
Age21 to 30 years on 1 January 2027 — born not earlier than 2 January 1997 and not later than 1 January 2006
Educational qualificationDegree in Engineering from a recognised university, or Sections A & B of the Institution of Engineers (India) AMIE, or an equivalent qualification recognised by the government
M.Sc. route (E&T services)M.Sc. or equivalent with Wireless Communication, Electronics, Radio Physics or Radio Engineering as a special subject — for specified services only
Final-year studentsMay apply; proof of passing must be submitted with the Main Examination application
Number of attemptsNo limit, within the age limit
Physical standardsCandidates must be physically fit as per the medical standards given in the notice

Upper age relaxation

CategoryRelaxation
OBC3 years
SC / ST5 years
PwBD10 years
Central government employees in specified departmentsUp to 5 years
Ex-Servicemen and ECO / SSCOAs specified in the notice
↑ Back to top

Exam pattern

Stage I — Preliminary Examination (objective)

Preliminary — 500 marks
PaperSubjectMarksDuration
Paper IGeneral Studies & Engineering Aptitude (common to all)2002 hours
Paper IIEngineering discipline-specific3003 hours
Total—500—

Multiple-choice questions with negative marking of one-third of the marks of the question for each wrong answer. Prelims marks are counted in the final merit.

Stage II — Main Examination (conventional)

Main — 600 marks
PaperSubjectMarksDuration
Paper IEngineering discipline-specific3003 hours
Paper IIEngineering discipline-specific3003 hours
Total—600—

Stage III — Personality Test

StageMarks
Personality Test (interview)200

Final merit

StageMarks
Preliminary500
Main600
Personality Test200
Total1,300
↑ Back to top

Selection process

  1. PreliminaryObjective papers I & II; qualify for Main by discipline and category
  2. MainTwo conventional papers in the chosen discipline
  3. Personality TestInterview at UPSC, New Delhi; DAF and documents verified
  4. AllocationFinal merit (out of 1,300), service preference and medical examination

Discipline cannot be changed

Candidates choose one discipline (Civil, Mechanical, Electrical or E&T) at the time of applying. Paper II of Prelims and both Main papers are in that discipline.

↑ Back to top

Cutoffs

UPSC publishes three cut-offs for each discipline: the Preliminary cut-off (out of 500), the written cut-off for Prelims + Main (out of 1,100), and the marks of the last recommended candidate (out of 1,300).

Civil Engineering — ESE 2025

Civil Engineering — ESE 2025 cut-off
CategoryPrelims (of 500)Written (of 1,100)Final (of 1,300)
General233498719
OBC230498704
SC210441633
ST216466664

Mechanical Engineering — ESE 2025

Mechanical Engineering — ESE 2025 cut-off
CategoryPrelims (of 500)Written (of 1,100)Final (of 1,300)
General238570758
OBC236511709
SC197425662
ST211468698

Electrical Engineering — ESE 2025

Electrical Engineering — ESE 2025 cut-off
CategoryPrelims (of 500)Written (of 1,100)Final (of 1,300)
General210484686
OBC209475678
SC177359587
ST194404646

Electronics & Telecommunication Engineering — ESE 2025

Electronics & Telecommunication Engineering — ESE 2025 cut-off
CategoryPrelims (of 500)Written (of 1,100)Final (of 1,300)
General176447661
OBC167422605
SC135270506
ST77270512

From the UPSC ESE 2025 cut-off marks (non-PwBD). EWS and PwBD cut-offs are given in the official PDF on upsc.gov.in.

Mechanical Engineering — General category trend

YearPrelims (of 500)Written (of 1,100)Final (of 1,300)
2022236581745
2023173445661
2024217537725
2025238570758
↑ Back to top

Vacancies

ESE 2027 — vacancies
ItemDetails
TotalAbout 480 (approximate, may change)
Reserved for PwBD19
DisciplinesCategory I Civil, Category II Mechanical, Category III Electrical, Category IV Electronics & Telecommunication

Discipline-wise and service-wise vacancies are given in the notice and may be revised by the cadre-controlling departments before the final result.

↑ Back to top

Services & salary

Main services filled through ESE
DisciplineServices / posts (examples)
CivilCentral Engineering Service (CPWD), Central Engineering Service (Roads), Central Water Engineering Service, Indian Railway Management Service (Civil), Indian Defence Service of Engineers (Civil), Survey of India, Border Roads Engineering Service
MechanicalIndian Railway Management Service (Mechanical), Indian Defence Service of Engineers (Mechanical), GSI Engineering Service, Defence Aeronautical Quality Assurance Service, Indian Naval Armament Service, Central Power Engineering Service
ElectricalIndian Railway Management Service (Electrical), Indian Defence Service of Engineers (Electrical & Mechanical), Central Power Engineering Service, CPWD (Electrical & Mechanical), Indian Naval Material Management Service
Electronics & TelecommunicationIndian Railway Management Service (Signal & Telecom), Indian Telecommunication Service, Indian Radio Regulatory Service, Central Power Engineering Service, Indian Naval Armament Service

The exact list of services and posts for each year is in the notice.

Pay

Entry gradePay level (7th CPC)Basic pay range
Group A — Junior Time Scale (Assistant Executive Engineer / Assistant Director)Level 10₹56,100 – ₹1,77,500
Group B postsAs notified for each post—

Dearness Allowance, HRA or government accommodation, Transport Allowance and other allowances are paid in addition.

↑ Back to top

Application process

  1. One-Time Registration (OTR)Create your OTR profile on upsconline.gov.in, once for all UPSC exams.
  2. Fill the ESE applicationChoose the discipline, exam centre and fill education and category details.
  3. Upload documentsPhotograph, signature and photo ID as specified.
  4. Pay the feeOnline or in cash at an SBI branch, as allowed in the notice.
  5. Submit and saveNote the registration ID; the withdrawal and correction facility, if any, is announced by UPSC.

Application fee

CategoryFee
General / OBC / EWS (men)₹200
Women, SC, ST and PwBDExempt
↑ Back to top

Important dates

EventESE 2027
Notification & application start16 September 2026
Last date to apply6 October 2026 (6:00 PM)
Age counted on1 January 2027
Preliminary Examination31 January 2027
Main Examination18 June 2027
Personality TestAfter the Main result (to be announced)

Dates as per the UPSC notice and calendar; follow upsc.gov.in for the e-admit card and any change.

↑ Back to top

Exam day guidelines — what to carry & what not to bring

UPSC applies strict entry and frisking rules. Read the instructions on your e-admit card the night before.

✅ Allowed items — carry these

  • e-Admit card printed, with a clear photograph; carry the same photo ID whose number is on the admit card.
  • Original photo ID: Aadhaar, Voter ID, PAN, Passport, Driving Licence or other ID allowed in the notice.
  • Two passport-size photographs, same as uploaded, if the photo on the admit card is unclear.
  • Black ballpoint pen for the OMR sheet in the Preliminary Examination.
  • PwBD certificate and scribe documents, if applicable.

❌ Strictly barred items — do NOT carry

Electronic devices: Mobile phones, smartwatches, fitness bands, Bluetooth devices, electronic gadgets of any kind

Calculators: Not allowed unless the notice expressly permits a specified type for a particular paper

Study material: Notes, books, written or printed papers, log tables (tables are supplied if required)

Bags & money holders: Wallets, purses, bags, handbags

Audio / optical gadgets: Cameras, headphones, earphones, microphones

Metal & accessories: Jewellery, ornaments, metal items, belts, caps, sunglasses

Food & drinks: Eatables (chips, snacks), drinks, chewing gum

Anything else prohibited: Any item listed as barred in the notice or on the e-admit card

Frisking is conducted at entry. Being found with a mobile phone or any barred item can lead to cancellation of candidature and debarment from UPSC examinations.

ℹ️ Note

There is no arrangement for safekeeping of barred items at the venue. Entry closes before the start of each session as stated on the e-admit card — reach early.

↑ Back to top

Syllabus & preparation resources

The detailed syllabus is in Appendix I of the ESE notice. Paper I of the Preliminary is common to all; Paper II of the Preliminary and both Main papers are discipline-specific.

Preliminary Paper I — General Studies & Engineering Aptitude

About these numbers

UPSC does not publish topic-wise weightage. Paper I usually has about 100 questions spread fairly evenly over its 10 topics; the counts below are approximate and only show that no topic can be skipped.

Preliminary Paper I — approximate topic weightage
TopicQuestions (≈)Marks (≈)Weightage
Current issues of national and international importance (social, economic, industrial development)102010%
Engineering aptitude — logical reasoning and analytical ability102010%
Engineering mathematics and numerical analysis102010%
General principles of design, drawing and importance of safety102010%
Standards and quality practices in production, construction, maintenance and services102010%
Basics of energy and environment — conservation, environmental pollution, climate change102010%
Basics of project management102010%
Basics of material science and engineering102010%
Information and communication technologies (e-governance, technology-based education)102010%
Ethics and values in the engineering profession102010%
Total100200100%

Discipline-specific subjects (Prelims Paper II and Main Papers I & II)

Civil

  • Building materials
  • Solid mechanics
  • Structural analysis
  • Design of steel structures
  • Design of concrete & masonry structures
  • Construction practice, planning & management
  • Fluid mechanics, open channel flow, pipe flow
  • Hydraulic machines & hydropower
  • Hydrology & water resources engineering
  • Environmental engineering
  • Geotechnical & foundation engineering
  • Surveying & geology
  • Transportation engineering

Mechanical

  • Fluid mechanics
  • Thermodynamics & heat transfer
  • IC engines
  • Refrigeration & air conditioning
  • Turbo machinery
  • Power plant engineering
  • Renewable energy
  • Engineering mechanics
  • Engineering materials
  • Mechanisms & machines
  • Design of machine elements
  • Manufacturing, industrial & maintenance engineering
  • Mechatronics & robotics

Electrical

  • Engineering mathematics
  • Electrical materials
  • Electric circuits & fields
  • Electrical & electronic measurements
  • Computer fundamentals
  • Basic electronics engineering
  • Analog & digital electronics
  • Systems & signal processing
  • Control systems
  • Electrical machines
  • Power systems
  • Power electronics & drives

Electronics & Telecommunication

  • Basic electronics engineering
  • Basic electrical engineering
  • Materials science
  • Electronic measurements & instrumentation
  • Network theory
  • Analog & digital circuits
  • Analog & digital communication systems
  • Control systems
  • Computer organisation & architecture
  • Electromagnetics
  • Advanced electronics topics
  • Advanced communication topics

Recommended books

Discipline / paperBookAuthor / publisher
Paper I (General Studies)ESE Prelims General Studies & Engineering AptitudeMADE EASY Publications
CivilStrength of Materials; Theory of StructuresR.K. Bansal; S. Ramamrutham
CivilReinforced Concrete Design (Limit State)S. Unnikrishna Pillai & Devdas Menon
CivilSoil Mechanics & FoundationsB.C. Punmia
MechanicalEngineering ThermodynamicsP.K. Nag
MechanicalTheory of MachinesS.S. Rattan
MechanicalFluid Mechanics & Hydraulic MachinesR.K. Bansal
ElectricalElectrical MachineryP.S. Bimbhra
ElectricalPower System EngineeringNagrath & Kothari
ElectricalPower ElectronicsP.S. Bimbhra
Electronics & TelecommunicationElectronic Devices & CircuitsMillman & Halkias
Electronics & TelecommunicationCommunication SystemsSimon Haykin
All disciplinesESE previous years’ solved papers (objective and conventional)MADE EASY / IES Master

Preparation tips

  • Previous papers: UPSC publishes question papers on upsc.gov.in — solve at least ten years of Prelims and Main papers.
  • Paper I counts: its 200 marks go into the final merit — prepare it alongside your technical subjects.
  • Conventional writing: practise full-length answers with neat diagrams and units for the Main papers.
  • Negative marking: one-third is deducted for each wrong answer in the Preliminary — avoid blind guesses.
↑ Back to top

FAQs & helpline

What is the age limit for ESE 2027?

21 to 30 years on 1 January 2027, with relaxation for reserved categories and specified groups.

How many attempts are allowed?

There is no limit on attempts, within the age limit.

Can final-year students apply?

Yes; proof of passing must be submitted at the Main stage as specified.

Are Prelims marks counted in the final merit?

Yes. Final merit is out of 1,300: Prelims 500, Main 600 and Personality Test 200.

Is there negative marking in the Main Examination?

No. Negative marking (one-third) applies only to the objective Preliminary papers.

Can I change my discipline after applying?

No. The discipline chosen in the application applies to all stages.

What is the starting pay for Group A services?

Level 10 of the pay matrix — basic pay starting at ₹56,100 plus allowances.

Are Indian Railway engineering posts filled through ESE?

Yes. Engineering sub-cadres of the Indian Railway Management Service are filled through ESE, as notified.

Official helpline & links

UPSC facilitation counter
011-23385271 / 011-23381125 / 011-23098543 (10:00 AM – 5:00 PM on working days)
UPSC website
upsc.gov.in
Online application
upsconline.gov.in
↑ Back to top